Experimental supersonic hydrogen combustion employing staged injection behind a rearward-facing step
Explore the source record for details and available documents.
Abbitt, John D., III↗
Engineering topics
Krauss, Roland H.
Publications and source records attributed to Krauss, Roland H..
Multiphoton ionization of N2 by the third harmonic of a Nd:YAG laser - A new avenue for air diagnostics
Laser-induced N2 ionization is accomplished using a commercially available Nd:YAG laser, and confirmed by means of ion-collection and spectral measurements. Neutral N2 is excited by six photons of the third harmonic frequency, or 355 nm, and is transformed to an ionized state. The radiation at 355 nm is separated from the fundamental and frequency-doubled Nd:YAG radiation to guarantee monochromatic incident radiation. Intense lines near 391.4 nm are found in the initial laser polarization and for a 90-degree rotation of polarization. The radiation at 391.4 nm is associated with an incoherent laser-induced flourescence process related to an ionized-state transition, and increases quadratically with laser power. A 45-mJ laser pulse focused to a diameter of 17 microns can produce an ion concentration of 3.25 x 10 to the 13th ions/cu cm. The large ion concentration and robust fluorescence signal make this technique an efficient method for time-of-flight velocimetry and in-flight testing.
Laufer, Gabriel↗
Combustion efficiency determined from wall pressure and temperature measurement in a Mach 2 combustor
A study of transverse hydrogen injection behind a rearward facing step in a Mach 2 airflow was conducted to determine the combustion efficiency and the combustor/inlet interactions at the low temperature lean-mixture operational end of a scramjet combustor model. The fuel was injected at sonic conditions into the electrically heated airstream, which was maintained at 850 K or below. The static pressure delivered at the entrance of the combustor ranged between 0.25 to 0.5 atm. Injector configurations included single and staged injectors placed at 3 or 3-and-7 step-heights downstream of the step, respectively, with injector diameters of 1, 1.5, and 2 mm. Ignition was achieved by initially unstarting the test section. The constant area combustor and the low initial temperatures caused thermal choking and upstream interaction to occur at very low equivalence ratios. Typically, most of the fuel was burned in the recirculation region behind the step and around the jets. The effects of initial conditions (temperature and pressure), fuel-to-air dynamic pressure ratio, and boundaries (thermal vs adiabatic) are presented.
Segal, Corin↗
Initial supersonic combustion facility measurements
A combustion test tunnel designed for continuous operation to 2000 K was assembled. Flow quality of a Mach 2 nozzle for use with this tunnel was examined using an array of impact probes. The performance of gas shields used to protect optical windows was examined using both shadowgraphs and planar laser induced iodine fluorescence. High speed videography was used to aid in design of pressure relief panels related to hydrogen combustion testing safety.
Krauss, Roland H.↗