Search NASA⌕ Search

Engineering topics

Kroes, R. L.

Publications and source records attributed to Kroes, R. L..

Growth kinetics of the (001) face of TGS below the ferroelectric transition temperature

The growth rates of the (001) face of triglycine sulfate (TGS) from aqueous solutions were measured at 33.55 C in an apparatus which produced a laminar flow of solution past the crystal. The data of growth rate as a function of relative supersaturation were compared with the results of two well-known models: the Burton-Cabrera-Frank (1951) surface diffusion model and the birth-and-spreading growth model. Both models produced good fits to the growth rate data. However, on the basis of the qualitative aspects of the experimentally-observed growth, it is suggested that the correct growth model for these crystals is the Burton-Cabrera-Frank model.

Reiss, D. A.↗

Growth of Triglycine Sulfate (TGS) crystals aboard Spacelab-3

An experiment to study the growth of single crystals of triglycine sulfate (NH2CH2COOH)3 H2SO4 (TGS) was successfully carried out on the Spacelab-3 mission during April 29 to May 6, 1985. Two crystals of TGS were grown during the flight, using a specially developed cooled sting technique of solution crystal growth. For the first time in any flight experiment the growth was monitored on-board as well as on ground by video-schlieren technique. Hundreds of holograms were taken for the solution/crystal interaction during the growth process. Preliminary results indicate that the optical system worked very well and the quality of reconstructed holograms is satisfactory. The cooled sting technique was successfully demonstrated. Holographic interferograms indicate convection free, diffusion limited growth. Some of the preliminary results of crystal quality are also presented.

Lal, R. B.↗

Holographic flow field analysis in Spacelab-3 crystal growth experiments

Holographic flow field analysis has been applied in a crystal growth experiment conducted on NASA's space shuttle program on Spacelab-3 during April 29 - May 6,l985. The experimental holograms taken during the crystal growth process are reconstructed into interferograms and later digitized to give refractive-index fields: A comparison has been made with theoretically computed interferograms.

Lal, R. B.↗

Results and further experiments using Spacelab holography

Spacelab 3 provided the platform for the first extensive application of holography in space. Holograms of excellent quality were recorded during the flight, providing information on the solution growth of triglycine sulfate crystals under microgravity conditions. The suppression of convection and the development of a symmetric concentration-depletion region around each crystal were clearly shown. Crystal growth was governed by diffusion mass transport across the depletion region. The successful performance of the holographic unit has prompted NASA to schedule a slightly modified version for reflight on IML-1; opportunities now exist for other investigators to use this facility.

Owen, R. B.↗

Holography on the Spacelab 3 mission

Spacelab 3's Fluid Experiment System, in which triglycine sulfate crystals were produced by a low temperature solution-growth technique, employs holography as its primary data-gathering system. This use of holography allows optical techniques which would be difficult to apply in orbit to be used after the holographic data is returned to ground laboratories, using an analysis of the reconstructed holographic image. The system used allows both single- and double-exposure holograms to be obtained in two separate orthogonal configurations.

Owen, Robert B.↗

Solution Growth of Crystals in Zero-Gravity

In a low-g environment, buoyancy driven convection effects in solution crystal growth are greatly reduced and, thus, one can study diffusion mass transport which in 1-g is masked by convective phenomena. Crystals of triglycine sulfate (TGS) will be grown aboard the Spacelab 3 mission, using a specially developed Fluids Experiments System (FES). The objectives of the experiment are: (1) to develop a technique for solution crystal growth in a low-g environment, (2) to characterize the growth environment provided by an orbiting spacecraft and to determine the influence of the environment on the growth behavior, and (3) to determine how gravity in a low-gravity environment influences the properties of a resulting TGS crystal. Single crystals of TGS have been grown using conventional low-temperature solution crystal growth method and the growth process has been extensively characterized. Various physical properties of TGS solution have been measured. Also, a unique technique of growing solution growth crystals by extracting heat at a programmed rate from the crystal through a semi-insulating sting has been developed and tested in 1-g environment.

Lal, R. B.↗

Diffusion of triglycine sulfate in aqueous solution

The diffusion coefficient of triglycine sulfate (TGS) in water was measured for several concentrations over a temperature range of 25 to 55 C. The activation energy for diffusion obtained from these measurements was 4180 cal/mol. No concentration dependence was seen. The maximum difference in D for the various ionic species present was determined by Raman spectroscopy to be about 5 percent.

Kroes, R. L.↗

Properties of TGS aqueous solution for crystal growth

A study has been made of the properties of triglycine sulfate (TGS) aqueous solution relevant to its use for single crystal growth. Measurements of the solubility, index of refraction, density, viscosity, diffusivity, and optical dispersion are presented and discussed. A knowledge of these properties is of importance for controlling and modeling the growth process and for obtaining high quality single crystals.

Kroes, R. L.↗

Growth of triglycine sulfate (TGS) crystals by solution technique

The growth of crystals from solution is greatly influenced by buoyancy driven convection. In a low-g environment, convection is greatly suppressed and diffusion becomes the predominant mechanism for thermal and mass transport. An experiment to grow TGS crystals by solution technique during the orbital Spacelab III mission has been designed. Crystals are grown by a new and unique technique of extracting heat from the crystal through a sting. The cooling at the sting tip is responsible for the desired supersaturation near the growing crystal. Calculations indicate that the cooled sting technique for solution crystal growth is necessary in low-g to maintain a maximum growth rate of 1 mm/day. Results of groundbased work in support of the flight experiment are discussed.

Lal, R. B.↗

Epitaxial growth of single crystal films

An experiment in gallium arsenide liquid phase epitaxy (LPE) on a flight of the SPAR 6 is described. A general purpose LPE processor suitable for either SPAR or Space Transportation System flights was designed and built. The process was started before the launch, and only the final step, in which the epitaxial film is grown, was performed during the flight. The experiment achieved its objectives; epitaxial films of reasonably good quality and very nearly the thickness predicted for convection free diffusion limited growth were produced. The films were examined by conventional analytical techniques and compared with films grown in normal gravity.

Lind, M. D.↗

The pyroelectric properties of TGS for application in infrared detection

The pyroelectric property of triglycine sulfate and its application in the detection of infrared radiation are described. The detectivities of pyroelectric detectors and other types of infrared detectors are compared. The thermal response of a pyroelectric detector element and the resulting electrical response are derived in terms of the material parameters. The noise sources which limit the sensitivity of pyroelectric detectors are described, and the noise equivalent power for each noise source is given as a function of frequency and detector area.

Kroes, R. L.↗

On the surface composition of Io

The wavelength dependence of the reflectivity of Io indicates the presence of two materials on the surface of this satellite of Jupiter. These materials are sulfur and an unspecified material (R1) which shows a wavelength dependence of its reflectivity for wavelengths from 0.3 to 1.0 micron similar to the non-H2O frost spectrum of the rings of Saturn. A 60/40 admixture of these two spectra matches the observed reflection spectrum of Io from 0.3 to 3.0 microns, if the spectrum of R1 is featureless for wavelengths above 1 micron. Sulfur will give rise to a posteclipse brightening. The variation with wavelength of the temperature dependence of the reflectivity of sulfur will allow an observational confirmation of the presence of sulfur on Io. The material R1 should show a large geometrical albedo. The translucency of sulfur is consistent with the polarization-phase curve of Io. The material R1 is also required to be translucent.

Wamsteker, W.↗

Photoluminescence and optical transmission of diffusion-pump oils.

The photoluminescence and optical transmission of the four widely used diffusion-pump oils, DC-705, DC-704, Convalex-10, and Convoil-20, were measured. Each of the oils was found to be transparent throughout the visible region, showed some absorption in the near-UV region, and became very opaque below approximately 300 nm. Both Convalex-10 and Convoil-20 turned yellow after exposure to UV light. No such change was noted in DC-705 or DC-704. Photoluminescence was produced in each of the four oils when irradiated with UV light. Both DC-705 and DC-704 had a nearly identical luminescence spectra that peaked at 350 nm. The spectra of Convalex-10 and Convoil-20 were fairly complex, with several peaks in the visible region.

Kroes, R. L.↗