Characterization of FOXSI Sounding Rocket Hard X-Ray Detectors Using Advanced Light Source at Berkeley
No abstract available
Engineering topics
Publications and source records attributed to Krucker, Sam.
No abstract available
Outline: Overview of FOXSI-2 (Focusing Optics X-ray Solar Imager) coordinated microflare observations with Hinode/XRT (X-Ray Telescope) and SDO/AIA (Solar Dynamics Observatory/Atmospheric Imaging Assembly); Temperature response functions for FOXSI-2, XRT and AIA; Combined Differential Emission Measure (DEM) analysis - to determine the amount of plasma in the line of sight that emits the radiation as a function of temperature; Thermal energy released during the microflares; Summary.
In high energy solar astrophysics, imaging hard X-rays by direct focusing offers higher dynamic range and greater sensitivity compared to past techniques that used indirect imaging. The Focusing Optics X-ray Solar Imager (FOXSI) is a sounding rocket payload which uses seven sets of nested Wolter-I figured mirrors that, together with seven high-sensitivity semiconductor detectors, observes the Sun in hard X-rays by direct focusing. The FOXSI rocket has successfully flown twice and is funded to fly a third time in Summer 2018. The Wolter-I geometry consists of two consecutive mirrors, one paraboloid, and one hyperboloid, that reflect photons at grazing angles. Correctly focused X-rays reflect twice, once per mirror segment. For extended sources, like the Sun, off-axis photons at certain incident angles can reflect on only one mirror and still reach the focal plane, generating a pattern of single-bounce photons that can limit the sensitivity of the observation of faint focused X-rays. Understanding and cutting down the singly reflected rays on the FOXSI optics will maximize the instrument's sensitivity of the faintest solar sources for future flights. We present an analysis of the FOXSI singly reflected rays based on ray-tracing simulations, as well as the effectiveness of different physical strategies to reduce them.
We present observations of the occulted active region AR 12222 during the third Nuclear Spectroscopic Telescope ARray (NuSTAR) solar campaign on 2014 December 11, with concurrent Solar Dynamics Observatory (SDO)/ AIA and FOXSI-2 sounding rocket observations. The active region produced a medium-size solar flare 1 day before the observations, at approximately 18 UT on 2014 December 10, with the post-flare loops still visible at the time of NuSTAR observations. The time evolution of the source emission in the SDO/AIA 335 Å channel reveals the characteristics of an extreme-ultraviolet late-phase event, caused by the continuous formation of new post-flare loops that arch higher and higher in the solar corona. The spectral fitting of NuSTAR observations yields an isothermal source, with temperature 3.8-4.6 MK, emission measure (0.3-1.8) × 1046 cm−3, and density estimated at (2.5-6.0) × 108 cm−3. The observed AIA fluxes are consistent with the derived NuSTAR temperature range, favoring temperature values in the range of 4.0-4.3 MK. By examining the post-flare loops' cooling times and energy content, we estimate that at least 12 sets of post-flare loops were formed and subsequently cooled between the onset of the flare and NuSTAR observations, with their total thermal energy content an order of magnitude larger than the energy content at flare peak time. This indicates that the standard approach of using only the flare peak time to derive the total thermal energy content of a flare can lead to a large underestimation of its value.
We have developed a fine-pitch hard X-ray (HXR) detector using a cadmium telluride (CdTe) semiconductor for imaging and spectroscopy for the second launch of the Focusing Optics Solar X-ray Imager (FOXSI). FOXSI is a rocket experiment to perform high sensitivity HXR observations from 4 to 15 keV using the new technique of HXR focusing optics. The focal plane detector requires less than 100 micrometers position resolution (to take advantage of the angular resolution of the optics) and approximately equals 1 keV energy resolution (full width at half maximum (FWHM)) for spectroscopy down to 4 keV, with moderate cooling (greater than -30 C). Double-sided silicon strip detectors were used for the first FOXSI flight in 2012 to meet these criteria. To improve the detectors' efficiency (66% at 15 keV for the silicon detectors) and position resolution of 75 micrometers for the second launch, we fabricated double-sided CdTe strip detectors with a position resolution of 60 micrometers and almost 100% efficiency for the FOXSI energy range. The sensitive area is 7.67 mm x 7.67 mm, corresponding to the field of view of 791'' x 791''. An energy resolution of 1 keV (FWHM) and low-energy threshold of approximately equals 4 keV were achieved in laboratory calibrations. The second launch of FOXSI was performed on 11 December 2014, and images from the Sun were successfully obtained with the CdTe detector. Therefore, we successfully demonstrated the detector concept and the usefulness of this technique for future HXR observations of the Sun.
The Focusing Optics X-ray Solar Imager (FOXSI) is, in its initial form, a sounding rocket experiment designed to apply the technique of focusing hard X-ray (HXR) optics to the study of fundamental questions about the high-energy Sun. Solar HXRs arise via bremsstrahlung from energetic electrons and hot plasma produced in solar flares and thus are one of the most direct diagnostics of flare-accelerated electrons and the impulsive heating of the solar corona. Previous missions have always been limited in sensitivity and dynamic range by the use of indirect (Fourier) imaging due to the lack of availability of direct focusing optics, but technological advances now make direct focusing accessible in the HXR regime (as evidenced by the NuSTAR spacecraft and several suborbital missions). The FOXSI rocket experiment develops and optimizes HXR focusing telescopes for the unique scientific requirements of the Sun. To date, FOXSI has completed two successful flights on 2012 November 02 and 2014 December 11 and is funded for a third flight. This paper gives a brief overview of the experiment, which is sensitive to solar HXRs in the 4-20 keV range, describes its first two flights, and gives a preview of plans for FOXSI-3.
From H-alpha movies from Aryabhatta Research Institute of Observational Sciences and from Prairie View Solar Observatory, hard X-ray movies from RHESSI, line-of-sight magnetogram movies from SOHO/MDI, and vector magnetograms from Marshal Space Flight Center, we examine the magnetic structure and evolution of the large delta-sunspot active region NOAA 10486 in relation to the onset and development of the two X-class flares that occurred in this active region on 28 and 29 October 2003. We find evidence that each of these flares was triggered by strongly sheared magnetic field via "tether-cutting" reconnection with adjacent/overlying strongly sheared field. In the first flare, the initial brightening in H-alpha: (1) was partly rooted in emerging sheared magnetic field along the edge of the large positive-polarity flux domain of the delta sunspot, and (2) consisted of four flare kernels, two in negative magnetic flux and two in positive magnetic flux. In the second flare, the brightening started in the core of a Z-shaped sigmoidal sheared magnetic field and the inner two of four H-alpha kernels were visible in 30-50 Kev hard X-ray image from RHESSI. Each flare spread from the initial quadrupolar brightening to develop into a much larger two-ribbon flare straddling a much more extensive swath of strongly sheared field along the edge of the large positive-flux domain of the delta sunspot, the first flare on the leading side and the second flare on the trailing side of this domain. Thus, localized internal reconnection triggered the explosion of these extensive sheared magnetic fields.