Engineering topics

Krueger, Steven K.

Publications and source records attributed to Krueger, Steven K..

10 records

DOE OSTI2026

High-Resolution LiDAR Observations for Coupled Effects of Dry-Air Entrainment and Haze-Cloud Interactions on Cloud Vertical Structure

This study demonstrates the high-resolution profiling of cloud microphysics in a laboratory chamber using Time-Correlated Single Photon Counting (TCSPC) LiDAR. We present a novel retrieval method to derive vertical extinction (𝜎) profiles, constrained by in situ measurements, to diagnose responses to dry-air entrainment. In clean clouds, the LiDAR signals and retrieved 𝜎 remain relatively uniform, with entrainment effects confined to the upper layer. In contrast, polluted clouds exhibit strong vertical variability and a transition to a water-vapor-limited state. Entrainment significantly enhances the haze number concentration (𝑁ℎ), particularly near the bottom, creating highly height-dependent extinction profiles for polluted clouds. Our results highlight the capability of high-resolution LiDAR in capturing fine-scale vertical inhomogeneities. This approach provides a robust framework for quantifying how aerosol loading modulates entrainment sensitivity, offering new insights into the transition between buffered and water-vapor-limited regimes.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS2005

Cloud Properties Simulated by a Single-Column Model. Part II: Evaluation of Cumulus Detrainment and Ice-phase Microphysics Using a Cloud Resolving Model

This paper is the second in a series in which kilometer-scale-resolving observations from the Atmospheric Radiation Measurement program and a cloud-resolving model (CRM) are used to evaluate the single-column model (SCM) version of the National Centers for Environmental Prediction Global Forecast System model. Part I demonstrated that kilometer-scale cirrus properties simulated by the SCM significantly differ from the cloud radar observations while the CRM simulation reproduced most of the cirrus properties as revealed by the observations. The present study describes an evaluation, through a comparison with the CRM, of the SCM's representation of detrainment from deep cumulus and ice-phase microphysics in an effort to better understand the findings of Part I. It is found that detrainment occurs too infrequently at a single level at a time in the SCM, although the detrainment rate averaged over the entire simulation period is somewhat comparable to that of the CRM simulation. Relatively too much detrained ice is sublimated when first detrained. Snow falls over too deep of a layer due to the assumption that snow source and sink terms exactly balance within one time step in the SCM. These characteristics in the SCM parameterizations may explain many of the differences in the cirrus properties between the SCM and the observations (or between the SCM and the CRM). A possible improvement for the SCM consists of the inclusion of multiple cumulus cloud types as in the original Arakawa-Schubert scheme, prognostically determining the stratiform cloud fraction and snow mixing ratio. This would allow better representation of the detrainment from deep convection, better coupling of the volume of detrained air with cloud fraction, and better representation of snow field.

Luo, Yali↗

NASA NTRS1998

Cloud-Scale Numerical Modeling of the Arctic Boundary Layer

The interactions between sea ice, open ocean, atmospheric radiation, and clouds over the Arctic Ocean exert a strong influence on global climate. Uncertainties in the formulation of interactive air-sea-ice processes in global climate models (GCMs) result in large differences between the Arctic, and global, climates simulated by different models. Arctic stratus clouds are not well-simulated by GCMs, yet exert a strong influence on the surface energy budget of the Arctic. Leads (channels of open water in sea ice) have significant impacts on the large-scale budgets during the Arctic winter, when they contribute about 50 percent of the surface fluxes over the Arctic Ocean, but cover only 1 to 2 percent of its area. Convective plumes generated by wide leads may penetrate the surface inversion and produce condensate that spreads up to 250 km downwind of the lead, and may significantly affect the longwave radiative fluxes at the surface and thereby the sea ice thickness. The effects of leads and boundary layer clouds must be accurately represented in climate models to allow possible feedbacks between them and the sea ice thickness. The FIRE III Arctic boundary layer clouds field program, in conjunction with the SHEBA ice camp and the ARM North Slope of Alaska and Adjacent Arctic Ocean site, will offer an unprecedented opportunity to greatly improve our ability to parameterize the important effects of leads and boundary layer clouds in GCMs.

Krueger, Steven K.↗

NASA NTRS1995

Improvements of an ice-phase microphysics parameterization for use in numerical simulations of tropical convection

It is important to properly simulate the extent and ice water content of tropical anvil clouds in numerical models that explicitly include cloud formation because of the significant effects that these clouds have on the radiation budget. For this reason, a commonly used bulk ice-phase microphysics parameterization was modified to more realistically simulate some of the microphysical processes that occur in tropical anvil clouds. Cloud ice growth by the Bergeron process and the associated formation of snow were revised. The characteristics of graupel were also modified in accord with a previous study. Numerical simulations of a tropical squall line demonstrate that the amount of cloud ice and the extent of anvil clouds are increased to more realistic values by the first two changes.

Krueger, Steven K.↗

NASA NTRS1992

The macroscopic behavior of cumulus ensembles simulated by a cumulus ensemble model

A number of simulation experiments are performed with the 2D UCLA cumulus ensemble model to study the macroscopic behavior of cumulus convection under a variety of different large-scale and underlying surface conditions. Specifically, the modulation of cumulus activity by the imposed large-scale processes and the eddy kinetic energy (EKE) budget are investigated in detail. In all simulations, cumulus convection is rather strongly modulated by large-scale advective processes in spite of the existence of some nonmodulated high-frequency fluctuations. The modulation exhibits some phase delays, however, when the basic wind shear is strong. This is presumably associated with the existence of mesoscale convective organization. The EKE budget analysis shows that the net eddy buoyancy generation rate is nearly zero for a wind range of cumulus ensembles.

Xu, Kuan-Man↗

NASA NTRS1991

Evaluation of cloudiness parameterizations using a cumulus ensemble model

Diagnostic cloudiness parameterizations in large-scale models are evaluated by using a two-dimensional numerical cumulus ensemble model. The model covers a large horizontal domain (512 km) but resolves individual clouds. This study explores the dependence of diagnostic relations (between cloud amount and a large-scale variable) on cloud regime, horizontal averaging distance, and cloud type for tropical convective cloud regimes. Large-scale variables, including relative humidity, cumulus mass flux, large-scale vertical velocity and surface precipitation rate, are examined. It is shown that the total cloud amount can be better estimated as the sum of separate estimates of stratiform and convective cloud amounts using different large-scale variables than by an estimate of the total cloud amount using any single large-scale variable. The stratiform cloud amount can best be estimated by using relative humidity. The convective cloud amount can be diagnosed by using cumulus mass flux. Neither set of diagnostic relations depends significantly on the stimulated cloud regime or horizontal averaging distance, but other diagnostic relations do show some such dependence. These results are interpreted and their implications for cloudiness parameterization are discussed.

Xu, Kuan-Man↗

NASA NTRS1989

Using a numerical cumulus ensemble model as a tool for studying cloud processes

A numerical cumulus ensemble model is presented, which covers a large area, and resolves individual cumulus clouds. The clouds produced by the model simulation are illustrated. Scatter plots of cloud amount vs relative humidity are examined. Plans for a cumulus ensemble model study on the effects of boundary layer processes on cloud formation are discussed.

Krueger, Steven K.↗

NASA NTRS1988

Numerical simulation of tropical cumulus clouds and their interaction with the subcloud layer

A two-dimensional numerical model, with an emphasis on turbulent processes in the boundary layer and in clouds, was developed for simulating an ensemble of cumulus clouds. The model was used to investigate the response of tropical cumulus clouds to imposed large-scale vertical advection by performing two simulations which were identical except that one was with upward large-scale vertical velocity (the 'disturbed' case) and the other was without any advection (the 'undisturbed' case). The results showed that deep cumulus clouds formed in the disturbed case, while only shallow clouds formed in the undisturbed case. The subcloud layer (SCL) in the disturbed case was strongly affected by cumulus circulations and rain evaporation, with both cumulus updrafts and downdrafts being important contributors to the SCL sensible and latent heat fluxes. Cumulus-scale circulation in the disturbed SCL determined where new clouds formed by creating convergence zones and moisture anomalies.

Krueger, Steven K.↗

NASA NTRS1988

Simulations using a 3D-moment turbulence closure in a two-dimensional cloud model - Comparisons with observations

A method for deep cumulus cloud simulations is presented, in which the plumes or clouds are simulated using a two-dimensional axisymmetric numerical cloud model with third-moment turbulence closure. This method is based on the assumption that the only uncertainty in the turbulence closure is in the turbulent length scale specification. Therefore, the length scale is varied, and, using different length scales, the simulated plumes are compared to the observed ones, making it possible to optimize the length scale prescription.

Krueger, Steven K.↗

NASA NTRS1988

The role of entrainment by falling raindrops in microbursts

The numerical model of Krueger et al. (1986) for dry microburst simulations is used to study the role of entrainment by falling raindrops. Two series of numerical simulations were conducted: a control series, and a series with the raindrop fall speed set to zero so that the rain moved with the air instead of falling through it. The results show that entrainment due to falling raindrops helps microbursts with large raindrop mixing ratios to form in stable stratifications. It is found that entrainment appears to contribute to the small spatial and temporal scales that characterize microburst outflows.

Krueger, Steven K.↗