Search NASA⌕ Search

Engineering topics

Kruger, Jacob S.

Publications and source records attributed to Kruger, Jacob S..

At least 19 records

Feedstock variability impacts the bioconversion of sugar and lignin streams derived from corn stover by Clostridium tyrobutyricum and engineered Pseudomonas putida

Abstract Feedstock variability represents a challenge in lignocellulosic biorefineries, as it can influence both lignocellulose deconstruction and microbial conversion processes for biofuels and biochemicals production. The impact of feedstock variability on microbial performance remains underexplored, and predictive tools for microbial behaviour are needed to mitigate risks in biorefinery scale‐up. Here, twelve batches of corn stover were deconstructed via deacetylation, mechanical refining, and enzymatic hydrolysis to generate lignin‐rich and sugar streams. These batches and their derived streams were characterised to identify their chemical components, and the streams were used as substrates for producing muconate and butyrate by engineered Pseudomonas putida and wildtype Clostridium tyrobutyricum , respectively. Bacterial performance (growth, product titers, yields, and productivities) differed among the batches, but no strong correlations were identified between feedstock composition and performance. To provide metabolic insights into the origin of these differences, we evaluated the effect of twenty‐three isolated chemical components on these microbes, including three components in relevant bioprocess settings in bioreactors, and we found that growth‐inhibitory concentrations were outside the ranges observed in the streams. Overall, this study generates a foundational dataset on P. putida and C. tyrobutyricum performance to enable future predictive models and underscores their resilience in effectively converting fluctuating lignocellulose‐derived streams into bioproducts.

09 BIOMASS FUELS↗

Muconic acid production from algae hydrolysate as a high-value co-product of an algae biorefinery

Muconic acid is an attractive bio-derived product because it can be easily converted to adipic acid, a high-value and high-volume monomer used in the production of nylon and other valuable consumer plastics. As such, production of muconic acid from algae hydrolysate was explored to expand the suite of products available from algal biomass. Here we have established initial performance parameters and have shown that the range of substrates present in algae hydrolysate that are consumed by Pseudomonas putida includes at least glucose, mannose, glycerol, acetic acid, and lactic acid. We achieved complete utilization of these major carbon sources found in Scenedesmus acutus hydrolysate with a maximum muconic acid productivity of 0.25 g/L h. Final titer was 13.0 g/L (27% molar process yield) at approximately 50 h. In addition, algae hydrolysate does not require any additional nutrients to achieve these performance metrics. Techno-economic analysis showed the potential to support up to 150 algal biorefineries at this yield with significant greenhouse gas reductions.

09 BIOMASS FUELS↗

Bioderived heat transfer fluids and methods of making the same

The present disclosure relates to a composition that includes a lignin-derived mixture that includes at least one of a dimer, a trimer, and/or a tetramer, where the composition is characterized by a thermal stability up to a maximum temperature between about 260° C. and about 300° C.

Thornburg, Nicholas Earl↗

Reversibly soluble bases for lignin oxidative depolymerization

Disclosed herein are lignin valorization strategies that integrate thermochemical pretreatment strategies. Using methods disclosed herein, yields of greater than 40% of usable monomers are obtained from lignin in biomass. The monomers can be assimilated by strains of Pseudomonas putida.

Kruger, Jacob S.↗

Lignin alkaline oxidation using reversibly-soluble bases

When excess base is required to drive desired reactions, such as in lignin alkaline oxidation, Sr(OH) 2 can offer a reversibly-soluble alternative to NaOH that allows simple recycle of the excess base with concomitant cost and environmental benefits.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Alkaline Oxidation of Lignin Using Reversibly-Soluble Bases

Production of oxidized aromatic monomers from lignin has been an intriguing process for decades, but widespread implementation has been inhibited by the high hydroxide:lignin ratios required for significant aldehyde yields. The high hydroxide loading in most scenarios renders the process uneconomical even for high-value products such as vanillin. In this work, we explore alkaline oxidation of a lignin-rich enzymatic hydrolysis residue isolated from corn stover, using alkaline earth metal hydroxides, such as Sr(OH)2 and Ba(OH)2 as base promoters. These materials are soluble at reaction temperature, but mostly insoluble at room temperature, allowing recovery and reuse by simple filtration. We show that monomer yields and profiles using these bases is similar to that obtained using NaOH as base, and that Sr(OH)2 can be recovered in yields above 90%. Preliminary TEA and LCA suggest that replacing NaOH with Sr(OH)2 can decrease monomer production costs by 40% and decrease global warming potential in lignin depolymerization by 30%, enabling a more economical and sustainable process.

BIOMASS FUELS↗

Alkaline Oxidation of Lignin Using Reversibly-Soluble Bases

Production of oxidized aromatic monomers from lignin has been an intriguing process for decades, but widespread implementation has been inhibited by the high hydroxide:lignin ratios required for significant aldehyde yields. The high hydroxide loading in most scenarios renders the process uneconomical even for high-value products such as vanillin. In this work, we explore alkaline oxidation of a lignin-rich enzymatic hydrolysis residue isolated from corn stover, using alkaline earth metal hydroxides, such as Sr(OH)2 and Ba(OH)2 as base promoters. These materials are soluble at reaction temperature, but mostly insoluble at room temperature, allowing recovery and reuse by simple filtration. We show that monomer yields and profiles using these bases is similar to that obtained using NaOH as base, and that Sr(OH)2 can be recovered in yields above 90%. Preliminary TEA and LCA suggest that replacing NaOH with Sr(OH)2 can decrease monomer production costs by 40% and decrease global warming potential in lignin depolymerization by 30%, enabling a more economical and sustainable process.

alkaline oxidation↗

From Petroleum to Biobased Crude: A Thermoplastic Polyurethane from Lignin-Oil Without Isocyanates

The movement to transfer from petroleum-based products and materials to renewables does not necessarily have to bypass the use of oil. A new type of "black-gold" is readily abundant from the earth's most abundant source of aromatic carbon: lignin. While fractionation of petroleum yields fuels and chemicals for a diverse set of industries, lignin fractionation using targeted catalysts has demonstrated the ability to generate monomers and oligomers rich in functional groups for polymer synthesis. This study explores the use of lignin-oil, generated from reductive catalytic fractionation of popular wood, to a hydroxyl-rich mixture of aromatics that is used to synthesize a thermoplastic non-isocyanate polyurethane. The lignin-oil is first converted to a cyclocarbonated derivative using a benign synthetic sequence and further polymerized with a diamine to yield the non-isocyanate TPU. While more work is underway to optimize the reaction conditions and meet typical mechanical properties of commercial materials, initial analysis shows thermoplastic behavior and flexible properties consistent with traditional thermoplastic polyurethanes.

BIOMASS FUELS↗

Bioproducts from high-protein algal biomass: An economic and environmental sustainability review and risk analysis

This report has High-protein algal biomass as an important bio-commodity that has the potential to provide a new source of sustainable protein products. Herein is a critical review that identifies 1) the most relevant sustainability findings related to the processing of proteinaceous algal biomass to higher value protein products and 2) the potential pathways to improve life cycle assessment (LCA) and techno-economic analysis (TEA) metrics, including life-cycle carbon dioxide equivalent (CO 2 eq), life cycle energy, and minimum selling price (MSP) of these products. The critical review of the literature revealed a large variation in model input parameters relating to these metrics. Therefore, a Monte Carlo analysis was conducted to assess the risk associated with these input variations. To understand the uncertainties that propagate into high-protein algae to products’ systems, we reviewed more than 20 state-of-the-art unit operations for algal biomass processing., including cell disruption, protein solubilization, protein precipitation and purification, and protein concentration. We evaluated displacement of proteinaceous products by algal-bioproducts, including ruminant feed, aquaculture feed, protein tablets, and biopolymers and biopolyesters, with prices in the market ranging from 1.9 to 120 $\$$ kg -1 protein. This review realized that the MSP of ruminant and non-ruminant feed ranges from 0.65±0.56 to 2.9±1.1 $\$$ kg -1 protein, and bioplastics’ MSP ranges from 0.97 to 7.0 $\$$ kg -1 protein. Regarding LCA metrics, there is limited research on life cycle energy in proteinaceous biomass concentration and bioproduct systems, reported at 32.7 MJ kg protein -1 , for animal feed displacement. Animal feed emissions in the literature report negative fluxes, representing environmental benefits, as low as -3.7 kgCO 2 eq kg -1 protein and positive fluxes, i.e., global warming potential, as high as 12.8 kgCO 2 eq kg -1 protein. There is limited research on bioplastics life cycle emissions reported at 0.6 kgCO 2 eq kg -1 protein. In general, the studies to date of algae-derived protein bioproducts showed similar life cycle emissions to soybean meals, nylon, polymers, and polystyrenes. Our risk analysis realized that more than 50% of scenarios can result in negative-net life cycle CO 2 eq emissions. This review and risk analysis assess and demonstrate the scenarios that improve economic and environmental sustainability metrics in high-protein algal bioproducts systems.

09 BIOMASS FUELS↗

Enabling Production of Algal Biofuels by Techno-Economic Optimization of Co-Product Suites

Recent techno-economic analysis (TEA) has underscored that for algal biofuels to be cost competitive with petroleum fuels, co-products are necessary to offset the cost of fuel production. The co-product suite must scale with fuel production while also maximizing value from the non-fuel precursor components. The co-product suite also depends on algal biomass composition, which is highly dynamic and depends on environmental conditions during cultivation. Intentional shifts in composition during cultivation are often associated with reduced biomass productivity, which can increase feedstock production costs for the algae-based biorefinery. The optimal algae-based biorefinery configuration is thus a function of many factors. We have found that comprehensive TEA, which requires the construction of process models with detailed mass and energy balances, along with a complete accounting of capital and operating expenditures for a commercial-scale production facility, provides invaluable insight into the viability of a proposed biorefinery configuration. This insight is reflected in improved viability for one biorefining approach that we have developed over the last 10 years, namely, the Combined Algal Processing (CAP) approach. This approach fractionates algal biomass into carbohydrate-, lipid-, and protein-rich fractions, and tailors upgrading chemistry to the composition of each fraction. In particular, transitioning from valorization of only the lipids to a co-product suite from multiple components of high-carbohydrate algal biomass can reduce the minimum fuel selling price (MFSP) from more than $8/gallon of gasoline equivalent (GGE) to $2.50/GGE. This paper summarizes that progress and discusses several surprising implications in this optimization approach.

09 BIOMASS FUELS↗

Alkaline Oxidation of Enzymatic Hydrolysis Lignin Using Reversibly Soluble Bases

Production of aromatic aldehydes, such as vanillin, from lignin, has been an intriguing process for decades, but widespread implementation has been inhibited by the high hydroxide:lignin ratios required for significant aldehyde yields. In this work, we explore oxidation of lignin-rich residues isolated from corn stover after deacetylation, mechanical refining, and enzymatic hydrolysis (DMR lignin), using reversibly-soluble bases in place of NaOH. In particular, strontium and barium hydroxides have low solubility at room temperature, but become soluble to more than 2 M at temperatures above 100 °C, thus producing highly alkaline conditions at reaction temperature but facilitating a simple recovery and recycle of the alkali upon cooling. Aromatic monomer yields are comparable for both types of bases at 20-30 wt%, depending on the lignin substrate. Overall, these results suggest a strategy to substantially reduce the cost and life cycle impact of lignin depolymerization by alkaline oxidation.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Catalytic Hydroprocessing of Single-Cell Oils to Hydrocarbon Fuels : Converting microbial lipids to fuels is a promising approach to replace fossil fuels

Microbial lipids hold great promise as biofuel precursors, and research efforts to convert such lipids to renewable diesel fuels have been increasing in recent years. In contrast to the numerous literature reviews on growing, characterising and extracting lipids from oleaginous microbes, and on converting vegetable oils to hydrocarbon fuels, this review aims to provide insight into aspects that are specific to hydroprocessing microbial lipids. While standard hydrotreating catalysts generally perform well with terrestrial oils, differences in lipid speciation and the presence of co-extracted compounds, such as chlorophyll and sterols, introduce additional complexities into the process for microbial lipids. Lipid cleanup steps can be introduced to produce suitable feedstocks for catalytic upgrading.

09 BIOMASS FUELS↗

BETO 2021 Peer Review - CAP Process Research

Combined Algal Processing (CAP) is an algae biorefining approach that employs pretreatment and extraction operations to fractionate algal biomass into an organic liquid phase containing lipids, an aqueous hydrolysate phase containing carbohydrates and protein, and a residual solid phase containing insoluble matter. Each of these fractions is upgraded to fuels and/or co-products, including non-isocyanate polyurethanes from unsaturated lipids, fuels from saturated lipids, fuel precursor carboxylic acids from the hydrolysate, and conductive carbons from the solid residue. Techno-economic analysis of multiple CAP configurations suggests that some configurations have a viable pathway to algal biofuels at $2.50/gallon of gasoline equivalent.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗