Search NASA⌕ Search

Engineering topics

Ku, Seung-Hoe

Publications and source records attributed to Ku, Seung-Hoe.

Intrinsic Toroidal Rotation Driven by Turbulent and Neoclassical Processes in Tokamak Plasmas from Global Gyrokinetic Simulations

Gyrokinetic tokamak plasmas can exhibit intrinsic toroidal rotation driven by the residual stress. While most studies have attributed the residual stress to the parallel-momentum flux from the turbulent E × B motion, the parallel-momentum flux from the drift-orbit motion (denoted $Π^D_\parallel$) and the E × B-momentum flux from the E × B motion (denoted $Π_{E×B}$) are often neglected. Here, we use the global total-f gyrokinetic code XGC to study the residual stress in the core and the edge of a DIII-D H-mode plasma. Numerical results show that both $Π^D_\parallel$ and $Π_{E×B}$ make up a significant portion of the residual stress. In particular, $Π^D_\parallel$ in the core is higher than the collisional neoclassical level in the presence of turbulence, while in the edge it represents an outflux of countercurrent momentum even without turbulence. Using a recently developed “orbit-flux” formulation, we show that the higher-than-neoclassical-level $Π^D_\parallel$ in the core is driven by turbulence, while the outflux of countercurrent momentum from the edge is mainly due to collisional ion orbit loss. In conclusion, these results suggest that $Π^D_\parallel$ and $Π_{E×B}$ can be important for the study of intrinsic toroidal rotation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Performance Improvements of Poincaré Analysis for Exascale Fusion Simulations

Understanding the time-varying magnetic field in a fusion device is critical for the successful design and construction of clean-burning fusion power plants. Poincaré analysis provides a powerful method for the visualization of magnetic fields in fusion devices. However, Poincaré plots can be very computationally expensive making it impractical, for example, to generate these plots in situ during a simulation. In this short paper, we describe a collaboration among computer science and physics researchers to develop a new Poincaré tool that provides a significant reduction in the time to generate analysis results.

Pugmire, Dave↗

Transport barrier and spinning blob dynamics in the tokamak edge

Abstract In this work, we investigate the dynamics of plasma blobs in the edge of magnetic confinement devices using a full-f gyrokinetic particle-in-cell code with X-point geometry. In simulations, the evolution of a seeded blob is followed as it approaches a naturally-forming zonal shear layer near the separatrix, where the blob is stabilized by a large spin induced by the self-consistent adiabatic electron response, and blob bifurcation and trapping are observed during the cross-field propagation of blobs. A new theoretical explanation in both the zonal free and zonal shear layer is constructed, where the dominant E × B spin motion is included. A theoretical condition for a transport barrier induced by the interaction between spinning blobs and the zonal shear layer is obtained, and its scaling is verified with simulations. The new theoretical framework, especially the transport barrier, is applicable to explain and predict various experimental phenomena. In particular, the transport barrier condition calculated with experimental parameters demonstrates that the blob radial transport for H mode is smaller than L mode in experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hybrid Analysis of Fusion Data for Online Understanding of Complex Science on Extreme Scale Computers

The current practice for fusion scientists running first principle simulations on high performance computing plat-forms is to either run their simulations and output their data for post-hoc analysis, or to place in situ analytics into their code. In this paper we examine a complex workflow using XGC fusions simulation run on the Oak Ridge Leadership Computing Facility's supercomputer Summit, which also involve three anal-yses as part of the results necessary for scientific discovery. We discuss the challenges faced when implementing these algorithms and present an original hybrid staging technique to help enable the physicists to make discoveries during the execution of the simulation. By creating this infrastructure, we can examine complicated physics results, which may not have been possible without the infrastructure. For example, our work enables the online visualization of turbulent homoclinic tangle around the magnetic X-point, breaking the last confinement surface. This visualization could help fusion scientists to better understand and improve the turbulence spread of plasma exhaust heat, which is crucial toward realizing plasmas beyond the currently accessible physics regimes of present-day tokamak reactors. The physics of turbulent homoclinic tangle will be reported in a future physics publication, by utilizing the original online analysis/visualization framework presented in this paper.

Suchyta, Eric↗

NSTX-U theory, modeling and analysis results

Here, the mission of the low aspect ratio spherical tokamak NSTX-U is to advance the physics basis and technical solutions required for optimizing the configuration of next-step steady-state tokamak fusion devices. NSTX-U will ultimately operate at up to 2 MA of plasma current and 1 T toroidal field on axis for 5 s, and has available up to 15 MW of neutral beam injection power at different tangency radii and 6 MW of high harmonic fast wave heating. With these capabilities NSTX-U will develop the physics understanding and control tools to ramp-up and sustain high performance fully non-inductive plasmas with large bootstrap fraction and enhanced confinement enabled via the low aspect ratio, high beta configuration. With its unique capabilities, NSTX-U research also supports ITER and other critical fusion development needs. Super-Alfvénic ions in beam-heated NSTX-U plasmas access energetic particle (EP) parameter space that is relevant for both α-heated conventional and low aspect ratio burning plasmas. NSTX-U can also generate very large target heat fluxes to test conventional and innovative plasma exhaust and plasma facing component solutions. This paper summarizes recent analysis, theory and modelling progress to advance the tokamak physics basis in the areas of macrostability and 3D fields, EP stability and fast ion transport, thermal transport and pedestal structure, boundary and plasma material interaction, RF heating, scenario optimization and real-time control.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Maintaining Trust in Reduction: Preserving the Accuracy of Quantities of Interest for Lossy Compression

As the growth of data sizes continues to outpace computational resources, there is a pressing need for data reduction techniques that can significantly reduce the amount of data and quantify the error incurred in compression. Compressing scientific data presents many challenges for reduction techniques since it is often on non-uniform or unstructured meshes, is from a high-dimensional space, and has many Quantities of Interests (QoIs) that need to be preserved. To illustrate these challenges, we focus on data from a large scale fusion code, XGC. XGC uses a Particle-In-Cell (PIC) technique which generates hundreds of PetaBytes (PBs) of data a day, from thousands of timesteps. XGC uses an unstructured mesh, and needs to compute many QoIs from the raw data, f.One critical aspect of the reduction is that we need to ensure that QoIs derived from the data (density, temperature, flux surface averaged momentums, etc.) maintain a relative high accuracy. We show that by compressing XGC data on the high-dimensional, nonuniform grid on which the data is defined, and adaptively quantizing the decomposed coefficients based on the characteristics of the QoIs, the compression ratios at various error tolerances obtained using a multilevel compressor (MGARD) increases more than ten times. We then present how to mathematically guarantee that the accuracy of the QoIs computed from the reduced f is preserved during the compression. We show that the error in the XGC density can be kept under a user-specified tolerance over 1000 timesteps of simulation using the mathematical QoI error control theory of MGARD, whereas traditional error control on the data to be reduced does not guarantee the accuracy of the QoIs.

Gong, Qian↗

Generation of E × B flow shear by finite orbit width effects from heat sources in tokamaks

Here we present a possible mechanism for the generation of strong E × B flow shear relevant to internal transport barrier formation in tokamak plasmas. From gyrokinetic calculations, we show that strong E × B flow shear can be generated by finite orbit width (FOW) effects associated with a non-uniform heat source and is sufficient to lead to transport barrier formation in the core region with a moderate power level. Two FOW effects inducing neoclassical polarization are shown to be responsible for this: (1) the radial drift of particle orbit center due to the variation of the heat source within orbit width and (2) the non-uniformly evolved orbit width by the non-uniform heating.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spatial core-edge coupling of the particle-in-cell gyrokinetic codes GEM and XGC

Two existing particle-in-cell gyrokinetic codes, GEM for the core region and XGC for the edge region, have been successfully coupled with a spatial coupling scheme at the interface in a toroidal geometry. Additionally, a mapping technique is developed for transferring data between GEM's structured and XGC's unstructured meshes. Two examples of coupled simulations are presented to demonstrate the coupling scheme. The optimization of GEM for graphics processing unit is also presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗