Search NASA⌕ Search

Engineering topics

Kubicki, James D.

Publications and source records attributed to Kubicki, James D..

At least 19 records

Nanoconfined Interfaces for Highly Selective Separation of Critical Rare Earth Elements

Industrial demand for rare earth elements (REEs) has surged over the past three decades due to their unique properties that support sustainable energy and new technologies. Separating individual REEs is challenging and hazardous, typically done through liquid-liquid extraction. There is an urgent need for environmentally friendly and efficient separation technologies for REEs. Porous materials offer promising advances for sustainable REE separation via ion-selective capture. We hypothesize that REE separation can be efficiently achieved in reactive nanopores, such as Zr(IV) and Cr(III) metal-organic frameworks (MOFs), through surface functionalization. By integrating material synthesis, interfacial chemistry experiments, theory, computation, and machine learning, we gained insights into the chemical factors controlling REE speciation and their competitive adsorption on MOFs. Our findings show that these materials’ selectivity can be tuned by surface functionalization. The machine learning component addressed ion-specific diffusion based on MOF topology and chemistry.

36 MATERIALS SCIENCE↗

Bridging molecular-scale interfacial science with continuum-scale models

Solid–water interfaces are crucial for clean water, conventional and renewable energy, and effective nuclear waste management. However, reflecting the complexity of reactive interfaces in continuum-scale models is a challenge, leading to oversimplified representations that often fail to predict real-world behavior. This is because these models use fixed parameters derived by averaging across a wide physicochemical range observed at the molecular scale. Recent studies have revealed the stochastic nature of molecular-level surface sites that define a variety of reaction mechanisms, rates, and products even across a single surface. To bridge the molecular knowledge and predictive continuum-scale models, we propose to represent surface properties with probability distributions rather than with discrete constant values derived by averaging across a heterogeneous surface. This conceptual shift in continuum-scale modeling requires exponentially rising computational power. By incorporating our molecular-scale understanding of solid–water interfaces into continuum-scale models we can pave the way for next generation critical technologies and novel environmental solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxide– and Silicate–Water Interfaces and Their Roles in Technology and the Environment

Interfacial reactions drive all elemental cycling on Earth and play pivotal roles in human activities such as agriculture, water purification, energy production and storage, environmental contaminant remediation, and nuclear waste repository management. The onset of the 21st century marked the beginning of a more detailed understanding of mineral aqueous interfaces enabled by advances in techniques that use tunable high-flux focused ultrafast laser and X-ray sources to provide near-atomic measurement resolution, as well as by nanofabrication approaches that enable transmission electron microscopy in a liquid cell. This leap into atomic- and nanometer-scale measurements has uncovered scale-dependent phenomena whose reaction thermodynamics, kinetics, and pathways deviate from previous observations made on larger systems. A second key advance is new experimental evidence for what scientists hypothesized but could not test previously, namely, interfacial chemical reactions are frequently driven by “anomalies” or “non-idealities” such as defects, nanoconfinement, and other nontypical chemical structures. Third, progress in computational chemistry has yielded new insights that allow a move beyond simple schematics, leading to a molecular model of these complex interfaces. In combination with surface-sensitive measurements, we have gained knowledge of the interfacial structure and dynamics, including the underlying solid surface and the immediately adjacent water and aqueous ions, enabling a better definition of what constitutes the oxide– and silicate–water interfaces. This critical review discusses how science progresses from understanding ideal solid–water interfaces to more realistic systems, focusing on accomplishments in the last 20 years and identifying challenges and future opportunities for the community to address. Further, we anticipate that the next 20 years will focus on understanding and predicting dynamic transient and reactive structures over greater spatial and temporal ranges as well as systems of greater structural and chemical complexity. Closer collaborations of theoretical and experimental experts across disciplines will continue to be critical to achieving this great aspiration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A perspective on iron (Fe) in the atmosphere: air quality, climate, and the ocean

As scientists engage in research motivated by climate change and the impacts of pollution on air, water, and human health, we increasingly recognize the need for the scientific community to improve communication and knowledge exchange across disciplines to address pressing and outstanding research questions holistically. Our professional paths have crossed because our research activities focus on the chemical reactivity of Fe-containing minerals in air and water, and at the air-sea interface. (Photo)chemical reactions driven by Fe can take place at the surface of the particles/droplets or within the condensed phase. The extent and rates of these reactions are influenced by water content and biogeochemical activity ubiquitous in these systems. One of these reactions is the production of reactive oxygen species (ROS) that cause damage to respiratory organs. Another is that the reactivity of Fe and organics in aerosol particles alter surficial physicochemical properties that impact aerosol-radiation and aerosol–cloud interactions. Also, upon deposition, aerosol particles influence ocean biogeochemical processes because micronutrients such as Fe or toxic elements such as copper become bioavailable. We provide a perspective on these topics and future research directions on the reactivity of Fe in atmospheric aerosol systems, from sources to short- and long-term impacts at the sinks with emphasis on needs to enhance the predictive power of atmospheric and ocean models.

54 ENVIRONMENTAL SCIENCES↗

Density Functional Tight-Binding Simulations Reveal the Presence of Surface Defects on the Quartz (101)–Water Interface

Understanding the structure and reactivity of quartz–water interfaces is critical for numerous applications in the geological, environmental, and biological sciences. However, disagreements on the atomic-level structure of the interfaces between experiments and simulations are hampering our ability to predict the surface reactivity. Here, we used density functional tight-binding (DFTB)-based molecular dynamics to simulate a series of quartz (101) surfaces having different types and densities of surface defects in water and compared them with the structures determined by X-ray reflectivity measurements. The DFTB simulations are able to reproduce previous classical and quantum mechanical predictions of the pristine quartz (101)–water interface that disagree with experimental observations. To remedy this situation, a set of defective quartz surfaces having various surface silicon (Si) vacancies were built as indicated by recent experimental studies. We found that the rotation of surface [SiO 4 ] tetrahedra near Si vacancies can lead to outward displacements of Si atoms similar to those observed in the experiments. The presence of additional surface Si vacancies caused inward relaxations of terminal oxygens through the formation of hydrogen bonds. Finally, the overall results indicate that the quartz (101)–water interface may include a mixture of geminal (≡Si–(OH) 2 )- and vicinal (≡Si–OH)-type silanol groups together with the presence of surface Si vacancies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Integrating Density Functional Theory Calculations with Vibrational and Nuclear Magnetic Resonance Spectroscopy

This review focuses on the complementary nature of density functional theory calculations and spectroscopic studies related to cellulose and its interactions within plant cell walls (PCWs). The complexity, structural disorder, and nanoscale nature of PCWs make them difficult to analyze and understand, but advances in sum-frequency generation and nuclear magnetic resonance spectroscopies as well as in density functional theory have made it possible to elucidate structure not observable previously. Combined with other techniques such as wide-angle X-ray scattering and neutron diffraction, details of PCW components (e.g., cellulose, lignin, pectin) and their interactions with one another can be elucidated. Furthermore, these techniques provide new insight into biological and biochemical studies and provide a basis for creating improved models of the PCWs.

36 MATERIALS SCIENCE↗

Simulations of Cellulose Synthesis Initiation and Termination in Bacteria

The processivity of cellulose synthesis in bacterial cellulose synthase (CESA) was investigated using molecular dynamics simulations and the hybrid quantum mechanics and molecular mechanics approach. Our results suggested that cellulose synthesis in bacterial CESA can be initiated with H 2 O molecules. The chain length or degree of polymerization (DOP) of the product cellulose is related to the affinity of the cellulose chain to the transmembrane tunnel of the enzyme. This opens up the possibility of generating mutants that would produce cellulose chains with desired chain lengths that could have applications in the biofuel and textile fields that depend on the DOP of cellulose chains.

59 BASIC BIOLOGICAL SCIENCES↗

Adsorption Study of Al 3+ , Cr 3+ , and Mn 2+ onto Quartz and Corundum using Flow Microcalorimetry, Quartz Crystal Microbalance, and Density Functional Theory

The adsorption of aqueous ions onto natural mineral surfaces controls numerous mineral–water interactions and is governed by, among other numerous factors, ion dehydration and hydrolysis. This work explored the extent to which dehydration and hydrolysis affect the adsorption of three metal cations, Al 3+ , Cr 3+ , and Mn 2+ , onto quartz (SiO2) and corundum (Al 2 O 3 ) surfaces at pH 3.8 through the integration of flow microcalorimetry (FMC), quartz crystal microbalance with dissipation (QCM-D) measurements and density functional theory (DFT) calculations. At pH 3.8, negligible amounts of Mn 2+ and Al 3+ are hydrolyzed, while 78% of Cr 3+ exist in hydrolyzed species. QCM-D and FMC measurements showed that Al 3+ and Cr 3+ adsorb to both surfaces, while Mn 2+ adsorbed only to Al 2 O 3 . DFT bond energy calculations confirmed the favorable bonding between the mineral surfaces and Al 3+ and Cr 3+ , and that Mn 2+ adsorption onto SiO 2 was unfavorable. Furthermore, FMC showed that on both surfaces, the adsorption of Al 3+ was endothermic and reversible, while that of Cr 3+ was exothermic and partially irreversible. Through the integration of experimental and computational methods, this work suggested that the reversible adsorption of unhydrolyzed cations (Mn 2+ and Al 3+ ) occurred through weak electrostatic interactions. The large energy cost required to dehydrate unhydrolyzed cations resulted in an endothermic adsorption process. Meanwhile, hydrolyzed Cr 3+ species can adsorb on quartz and corundum through covalent-bond formation, and thus, their adsorption was partially irreversible. Furthermore, the hydrolysis of Cr 3+ lowered the dehydration energy during adsorption, resulting in an exothermic adsorption. By using bond energies as a guide to indicate the possibility of thermodynamically favored adsorption, there was a strong agreement between the DFT and experimental techniques. The findings presented here contribute to understanding and predicting various mineral–water interfacial processes in the natural environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing cellulose structures with vibrational spectroscopy

This paper reviews principles, data interpretations, and applications of vibrational spectroscopic methods used for analysis of cellulose in the isolated state and in plant cell walls or lignocellulose biomass. The paper begins with reviewing the crystalline structures of crystalline cellulose polymorphs and the principles of three different vibrational spectroscopy methods—infrared (IR), Raman, and sum frequency generation (SFG)—complemented with density functional theory calculations. Then, it discusses the vibrational modes of crystalline celluloses, how the chain orientation in crystalline domain is analyzed in each method, and how the concentration and spatial distribution of crystalline cellulose domains interspersed in amorphous matrices are manifested or analyzed differently in these three methods. Finally, the paper discusses examples of analyzing crystalline cellulose in plant cell walls or lignocellulose biomass with IR, Raman, and SFG including spectroscopic imaging. One review cannot cover all vibrational spectroscopy literatures on cellulose; this review aims at providing tutorial information, using selected literatures and experimental data, needed to interpret nano-, meso-, and micro-scale structures of cellulose in plant cell walls and lignocellulose biomass.

59 BASIC BIOLOGICAL SCIENCES↗

Arabinose substitution effect on xylan rigidity and self-aggregation

Substituted xylans play an important role in the structure and mechanics of the primary cell wall of plants. Arabinoxylans (AX) consist of a xylose backbone substituted with arabinose, while glucuronoarabinoxylans (GAX) also contain glucuronic acid substitutions and ferulic acid esters on some of the arabinoses. Here, we provide a molecular-level description on the dependence of xylan conformational, self-aggregation properties and binding to cellulose on the degree of arabinose substitution. Molecular dynamics simulations reveal fully solubilized xylans with a low degree of arabinose substitution (lsAX) to be stiffer than their highly substituted (hsAX) counterparts. Small-angle neutron scattering experiments indicate that both wild-type hsAX and debranched lsAX form macromolecular networks that are penetrated by water. In those networks, lsAX are more folded and entangled than hsAX chains. Increased conformational entropy upon network formation for hsAX contributes to AX loss of solubility upon debranching. Furthermore, simulations show the intermolecular contacts to cellulose are not affected by arabinose substitution (within the margin of error). Ferulic acid is the GAX moiety found here to bind to cellulose most strongly, suggesting it may play an anchoring role to strengthen GAX-cellulose interactions. The above results suggest highly substituted GAX acts as a spacer, keeping cellulose microfibrils apart, whereas low substitution GAX is more localized in plant cell walls and promotes cellulose bundling.

59 BASIC BIOLOGICAL SCIENCES↗

Simultaneous Adsorption and Incorporation of Sr 2+ at the Barite (001)–Water Interface

Ionically-bonded minerals are ubiquitous and play a determinative role in controlling the mobility of toxic metals in natural environments. However, little is known about the mechanism of ion uptake by these mineral surfaces. In this study, the sorption of strontium ions (Sr 2+ ) to the barite (001) – water interface was studied using a combination of synchrotron x-ray scattering and three types of computational simulations (density functional theory, classical molecular dynamics (CMD), and CMD-metadynamics). In situ resonant anomalous X-ray reflectivity (RAXR) revealed that Sr 2+ adsorbed on the barite surface as inner-sphere surface complexes and was incorporated within the outermost barite atomic layers. Density functional theory combined with classical molecular dynamics simulations confirmed the thermodynamic stability of these species, demonstrating almost equal magnitudes in the free energy of sorption between these species. Metadynamics simulations showed a more detailed feature in the free energy landscape for metal adsorption where adsorbed Sr 2+ are stabilized in as many as four distinct inner-sphere sites and additional outer-sphere sites that are more diffuse and less energetically favorable than the inner-sphere sites. Additionally, the energy barriers among those inner-sphere sites were significantly lower compared with those for constituent cation Ba 2+ , implying fast exchange among adsorbed Sr 2+ species. The Sr 2+ uptake measured by RAXR followed a Frumkin isotherm defined with an apparent free energy of sorption, Δ≈ G Sr -22 kJ/mol, and an effective attractive interaction constant, γ ≈ -4.5 kJ/mol, between sorbed Sr 2+ . While the observed free energy can be mostly explained by the Helmholtz free energy of adsorption for Sr 2+ , ΔF Sr = -15.3 kJ/mol, the origin of the sorbate – sorbate correlation could not be fully described by our computational work. Together, these experimental and computational results demonstrate the complexity of Sr 2+ adsorption behavior at the barite (001) surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantum Calculations on Plant Cell Wall Component Interactions

In this paper, density functional theory calculations were performed to assess the relative interaction energies of plant cell wall components: cellulose, xylan, lignin and pectin. Monomeric and tetramer linear molecules were allowed to interact in four different configurations for each pair of compounds. The M0 5 -2X exchange-correlation functional which implicitly accounts for short- and mid-range dispersion was compared against MP2 and RI-MP2 to assess the reliability of the former for modeling van der Waals forces between these PCW components. Solvation effects were examined by modeling the interactions in the gas phase, in explicit H 2 O, and in polarized continuum models (PCM) of solvation. PCMs were used to represent water, methanol, and chloroform. The results predict the relative ranges of each type of interaction and when specific configurations will be strongly preferred. Finally, structures and energies are useful as a basis for testing classical force fields and as guidance for coarse-grained models of PCWs.

59 BASIC BIOLOGICAL SCIENCES↗

Binding Geometries of Silicate Species on Ferrihydrite Surfaces

Silicate sorption on ferrihydrite surfaces, as monomers, oligomers, and polymers, strongly affects ferrihydrite crystallinity, thermodynamic stability, and surface reactivity. How these silicate species bind on ferrihydrite surfaces is, however, not well understood. We have determined silicate binding geometries using a combination of X-ray absorption spectroscopy (XAS), differential atomic pair distribution function (d-PDF) analysis, and density functional theory (DFT) calculations. Silicon K-edge absorption pre-edges and DFT-predicted energies indicate that silicate forms monomeric monodentate–mononuclear (MM) complexes at low silicate sorption loadings. With increasing silicate loading, the pre-edge peak shifts to higher energies, suggesting changes in the silicate binding geometry toward multidentate complexation. The d-PDF analysis determines the Si–Fe interatomic distance to be ~3.25 Å for the high-loading samples. The DFT calculations indicate that such distance corresponds to an oligomer in the bidentate–binuclear (BB) binding geometry. The transition of the silicate sorption geometry accompanied by polymerization can affect stability of ferrihydrite and its adsorption and redox reactivity and increase the degree of Si isotopic fractionation upon silicate sorption on Fe oxides. MM monomeric complexes and BB oligomeric complexes should be used for surface complexation models predicting silicate sorption on Fe oxide surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗