Search NASA⌕ Search

Engineering topics

Kumar, P

Publications and source records attributed to Kumar, P.

27 records · Page 2

Finite-Temperature Micromagnetism

It is investigated how magnetic hysteresis is affected by finite-temperature excitations, using soft regions in hard-magnetic matrices as model systems. In lowest order, magnetization processes are described by the traditional approach of using finite-temperature materials constants such as K-1(T). Nanoscale excitations are usually small perturbations. For example, a Bloch summation over all magnon wave vectors shows that remanence is slightly enhanced, because long-wavelength excitations are suppressed. However, a reverse magnetic field enhances the effect of thermal excitations and causes a small reduction of the coercivity. To describe such effects, we advocate micromagnetic calculations where finite-temperature fluctuations are treated as small corrections to the traditional approach, as contrasted to full-scale Monte Carlo simulations.

Skomski, R↗

Predicting the Future of Permanent-Magnet Materials

There are two main thrusts towards new permanent-magnet materials: improving extrinsic properties by nanostructuring and intrinsic properties by atomic structuring. Theory-both numerical and analytical-plays an important role in this ambitious research. Our analysis of aligned hard-soft nanostructures shows that soft-in-hard geometries are better than hard-in-soft geometries and that embedded soft spheres are better than sandwiched soft layers. Concerning the choice of the hard phase, both a high magnetization and a high anisotropy are necessary. As an example of first-principle research, we consider interatomic Mn exchange in MnAl and find strongly ferromagnetic intralayer exchange, in spite of the small Mn-Mn distances.

Skomski, R↗

Production of negative ions on graphite surface in H{sub 2}/D{sub 2} plasmas: Experiments and srim calculations

In previous works, surface-produced negative-ion distribution-functions have been measured in H{sub 2} and D{sub 2} plasmas using graphite surfaces (highly oriented pyrolitic graphite). In the present paper, we use the srim software to interpret the measured negative-ion distribution-functions. For this purpose, the distribution-functions of backscattered and sputtered atoms arising due to the impact of hydrogen ions on a-CH and a-CD surfaces are calculated. The srim calculations confirm the experimental deduction that backscattering and sputtering are the mechanisms of the origin of the creation of negative ions at the surface. It is shown that the srim calculations compare well with the experiments regarding the maximum energy of the negative ions and reproduce the experimentally observed isotopic effect. A discrepancy between calculations and measurements is found concerning the yields for backscattering and sputtering. An explanation is proposed based on a study of the emitted-particle angular-distributions as calculated by srim.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase, Dielectric and Ferroelectric Properties of Microwave Sintered La and Ca Modified BaTiO{sub 3} Ceramics

Lanthanum and calcium modified barium titanate, Ba{sub (1-x)}La{sub x}Ti{sub (1-x/4)}O{sub 3}/BLT and Ba({sub 1-x})Ca{sub x}TiO{sub 3}/BCT, where x = 0.02, ferroelectric ceramic samples were synthesized in single perovskite phase by microwave processing technique. Sintering temperature was optimized at 1100 deg. C for 1h. Presence of pore free micron size uniform grains suggested the advantage of using microwave sintering process. Transition temperature (T{sub c}) decreases with the substitution of La content in BT system. Temperature coefficient of capacitance is negligible from RT temperature to 75 deg. C for BLT ceramic samples. Polarization vs. electric field (P-E) hysteresis loop study confirms the ferroelectric nature of the modified BT ceramic samples.

36 MATERIALS SCIENCE↗

Studies on Stuctural and Electrical Properties of (1-X)Ba(Fe{sub 0.5}Nb{sub 0.5})O{sub 3}-xSrTiO{sub 3}, with X = 0, 0.05 Ceramics

A polycrystalline ceramics of (1-x)Ba(Fe{sub 0.5}Nb{sub 0.5})O{sub 3}-xSrTiO{sub 3}, with x = 0, 0.05 was synthesized by high temperature solid-state reaction technique. X-ray diffraction analysis of the powders suggests the formation of a single-phase material with monoclinic structure. SEM images exhibit the uniform distribution of grains of the sample. Sintered pellets were investigated for its dielectric ({epsilon} and tan{delta}) properties in the temperature range of 30 deg. C - 270 deg. C and in the frequency range of 100Hz-5MHz suggest that the compound do not have dielectric anomaly in the studied frequency and temperature ranges.

36 MATERIALS SCIENCE↗

Reconnection in photospheric-chromospheric current sheet and coronal heating

It has been observed by various ground and space based solar missions that magnetic reconnection occurs frequently in the photosphere-chromosphere region as well as in the solar corona. The purpose of this article is to examine the process of reconnection in thin current sheet formed between two oppositely directed magnetic flux tubes in photospheric-chromospheric region. Using the data of different atmospheric models for the solar photosphere and chromosphere, we have estimated the rate of magnetic reconnection in terms of Alfvenic Mach number, growth rate of tearing mode, island length scales, and energy dissipation rate necessary to heat the chromospheric plasma. It is found that magnetic Reynolds number for the current sheet in the chromosphere varies from 1.14 Multiplication-Sign 10{sup 3} to 7.14 Multiplication-Sign 10{sup 6} which indicates that the field lines in the photosphere and chromosphere reconnect with speed, that is, 0.00034 to 0.0297 times the Alfven speed. Frequency of the MHD waves generated in the chromosphere reconnection region is of the order of 100 Hz, so these high-frequency waves may be the sources of coronal heating and solar wind acceleration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Synthesis Of Noble Metal Nanoparticle Composite Glasses Using Low Energy Ion Beam Mixing

Carbon coated thin films of Cu or Au on fused silica glasses have been irradiated using 100 keV Ar{sup +} ions at different fluences ranging from 1x10{sup 13} to 1x10{sup 16} ion/cm{sup 2}. In this article, we explore a route to form noble metal nanoparticles in amorphous glass matrices without post irradiation annealing using low energy ion beam mixing where nuclear energy loss process is dominant. Optical and structural properties were studied using UV-Vis-NIR absorbance spectroscopy and Glancing angle X-ray Diffraction (GXRD). Results showed that Cu and Au nanoparticles are formed at higher fluence of 1x10{sup 16} ion/cm{sup 2} used in this work without annealing. The diameters of metal nanoparticles obtained from UV-Vis NIR and GXRD are in agreement.

36 MATERIALS SCIENCE↗