Search NASA⌕ Search

Engineering topics

Kumar, Ravi

Publications and source records attributed to Kumar, Ravi.

46 records · Page 3

Thermoluminescence Characteristics of Nanocrystalline LiF Phosphors Synthesized at Different pH Values

Nanocrystalline lithium fluoride (LiF) phosphors have been prepared by the chemical co-precipitation method at different pH values (7.0, 8.0, 9.0). The formation of nanocrystalline structure has been confirmed by X-ray diffraction and transmission electron microscope. The thermolumniscence (TL) properties of LiF phosphors irradiated with gamma rays at different doses have been studied. The analysis of TL glow curve has revealed the existence of two well resolved glow peaks, one low temperature peak at around 145 deg. C and other one at higher temperature around 375 deg. C. The LiF nano-crystallites synthesized at 8.00 pH have been found to show maximum TL intensity at studied gamma doses (0.1 Gy-15 Gy).

36 MATERIALS SCIENCE↗

120 MeV Ag{sup 9+} Ions Induced Ionoluminescence of SrS:Ce

We report the ionoluminescence (IL) of SrS:Ce subjected to different fluences of 120 MeV Ag{sup 9+} ion beam. IL spectrum comprises of a main peak at 487 nm with a shoulder at 535 nm, which were identified on the account of transitions from 5d state to 4f ({sup 2}F{sub 5/2}, {sup 2}F{sub 7/2}) states of Ce{sup 3+} in SrS. The bright ionoluminescent behaviour of SrS:Ce may be exploited in the applications of this material as a scintillation detector for swift heavy ions.

36 MATERIALS SCIENCE↗

Electronic Structure Studies of 200 MeV Ag{sup +15} Swift Heavy Ion Irradiated SnO{sub 2} Thin Films Using X-Ray Absorption Spectroscopy

Tin dioxide (SnO{sub 2}) thin films were deposited on a well cleaned sapphire single crystal substrate by rf magnetron sputtering technique. After deposition, films were irradiated by swift heavy ion (SHI) irradiation at various ion fluences. We present the X-ray absorption spectra (XAS) at the oxygen K- and Sn M{sub 5,4,} edge. The XAS pattern reveals the broadening of O K- and Sn M{sub 5,4,} edge features with increasing ion fluence. The fraction of under-coordinated surface atoms in the SnO{sub 2} thin films increases, which is attributed to the structural distortions induced by SHI irradiations.

36 MATERIALS SCIENCE↗

Irradiation induced ferromagnetism at room temperature in TiO{sub 2} thin films: X-ray magnetic circular dichroism characterizations

We report on the room temperature ferromagnetism in the swift heavy ion (SHI) irradiated TiO{sub 2} thin films by x-ray absorption spectroscopy (XAS) and x-ray magnetic circular dichroism (XMCD) experiments at the O K and Ti L{sub 3,2} absorption edges. The XAS/XMCD measurements provide direct evidence of magnetic polarization of the O 2p and Ti 3d orbitals. The unquenched orbital magnetic moment within the O 2p shell is ferromagnetically coupled to the neighboring Ti moments, which illustrates the intense hybridization of the O 2p and Ti 3d orbitals induced by SHI irradiation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Physical Properties Of Eu{sub 3}Ba{sub 2}Mn{sub 2}Cu{sub 2}O{sub 12}

The physical properties of the manganocuprate compound, Eu{sub 3}Ba{sub 2}Mn{sub 2}Cu{sub 2}O{sub 12}(Eu-3222) are investigated using X-ray diffraction, resistivity, magnetization and dielectric measurements. The structure of the Eu-3222 compound is made by the intermixing of Eu-123 (oxygen deficient triple perovskite block) and Eu-214 (K{sub 2}NiF{sub 4} type single rock-salt like block). Electrical resistivity data show insulating behavior down to the measurable temperature and exhibits a conduction mechanism which can be explained on the basis of 3D variable range hopping model. Magnetization data shows a antiferromagnetic behavior at 5 K, however without any clear signature of magnetic ordering in the temperature range 5-300 K. Dielectric (Capacitance), measured as a function of temperature at various frequencies exhibits frequency dependence, indicating glassy relaxation of dipole moments.

36 MATERIALS SCIENCE↗

Performance of a double pass solar air collector

Double pass counter flow solar air collector with porous material in the second air passage is one of the important and attractive design improvement that has been proposed to improve the thermal performance. This paper presents theoretical and experimental analysis of double pass solar air collector with and without porous material. A mathematical model has been developed based on volumetric heat transfer coefficient. Effects of various parameters on the thermal performance and pressure drop characteristics have been discussed. Comparison of results reveals that the thermal efficiency of double pass solar air collector with porous absorbing material is 20-25% and 30-35% higher than that of double pass solar air collector without porous absorbing material and single pass collector respectively. (author)

14 SOLAR ENERGY↗

Swift heavy ion irradiation induced magnetism in magnetically frustrated BiMn{sub 2}O{sub 5} thin films

The swift heavy ion (SHI) irradiation induces weak ferrimagnetism (FM) in magnetically frustrated polycrystalline BiMn{sub 2}O{sub 5} thin films. This is manifested from irradiation induced higher energetic configuration that accounts for evolution of the Mn{sup 2+} state in the Mn{sup 3+}/Mn{sup 4+} network. Basically, this is the root of large magnetic moment in the irradiated samples. X-ray diffraction and Raman-scattering data of the samples indicate considerable modifications in the crystal structure after the SHI irradiation. FM in the irradiated samples and magnetically frustrated behavior of the pristine sample is apparent from dc magnetization measurements. Element specific characterizations such as near-edge x-ray absorption fine structure spectroscopy at O K and Mn L{sub 3,2} edges along with x-ray magnetic circular dichroism at Mn L{sub 3,2} edge show the evolution of the Mn{sup 2+} at disbursement of the Mn{sup 4+}. The microscopic origin behind the induced weak FM is found to be the increased orbital moment in the irradiated thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Carbon Capture and Sequestration from a Hydrogen Production Facility in an Oil Refinery

The project proposed a commercial demonstration of advanced technologies that would capture and sequester CO 2 emissions from an existing hydrogen production facility in an oil refinery into underground formations in combination with Enhanced Oil Recovery (EOR). The project is led by Praxair, Inc., with other project participants: BP Products North America Inc., Denbury Onshore, LLC (Denbury), and Gulf Coast Carbon Center (GCCC) at the Bureau of Economic Geology of The University of Texas at Austin. The project is located at the BP Refinery at Texas City, Texas. Praxair owns and operates a large hydrogen production facility within the refinery. As part of the project, Praxair would construct a CO 2 capture and compression facility. The project aimed at demonstrating a novel vacuum pressure swing adsorption (VPSA) based technology to remove CO2 from the Steam Methane Reformers (SMR) process gas. The captured CO 2 would be purified using refrigerated partial condensation separation (i.e., cold box). Denbury would purchase the CO 2 from the project and inject the CO 2 as part of its independent commercial EOR projects. The Gulf Coast Carbon Center at the Bureau of Economic Geology, a unit of University of Texas at Austin, would manage the research monitoring, verification and accounting (MVA) project for the sequestered CO 2 , in conjunction with Denbury. The sequestration and associated MVA activities would be carried out in the Hastings field at Brazoria County, TX. The project would exceed DOE's target of capturing one million tons of CO 2 per year (MTPY) by 2015. Phase 1 of the project (Project Definition) is being completed. The key objective of Phase 1 is to define the project in sufficient detail to enable an economic decision with regard to proceeding with Phase 2.

08 HYDROGEN↗

Synthesis and characterization of bismuth doped barium sulphide nanoparticles

We have synthesized BaS:Bi nanocrystalline powder of average grain size 35 nm by solid-state diffusion method using sodium thiosulphate as a flux. During this work we have optimized the nature and amount of flux, amount of the dopant and temperature of firing for maximum yield of photoluminescence. The samples were characterized by X-ray powder diffraction (XRD) method, transmission electron microscopy (TEM), photoluminescence (PL) and UV-visible techniques. On excitation by 425 nm, these nanophosphors give one emission peak at 575 nm which corresponds to green color. In the excitation spectra of these particles there are two peaks at 350 nm and 425 nm. The effect of dopant concentration on the photoluminescence of BaS:Bi nanocrystallites has been studied which is in agreement with the principle of concentration quenching. The energy band gap of bismuth doped BaS nanopowder has been calculated to be 4.25 eV and is blue shifted in comparison to their bulk counterparts. The blue shift may be due to the quantum confinement in the particles.

36 MATERIALS SCIENCE↗