Shockwave and plasma assisted rock cracking for geothermal drilling
Not Available
Akhter, Mirza (ORCID:0000000161689487)↗
Engineering topics
Kumar, Sanat
Publications and source records attributed to Kumar, Sanat.
Creating Novel Gas Separation Constructs by Manipulating Free-Volume Distributions in Polymer-Grafted Nanoparticles
Polymer membranes are critical to sustainability applications, and in this work we focused on one key application, the efficient separation of gas mixtures. Despite their widespread use, important challenges remain in the use of polymer membranes in this context – i.e., finding membrane materials with selectively improved transport of the desired mixture component(s) while possessing enhanced strength and improved aging behavior relative to the best current benchmarks. The important separation figures of merit are the gas flux, which is proportional to the permeability, P i = D i × S i (Di is the gas diffusivity and S i its solubility coefficient) and selectivity (i.e., gas purity,α ij = P i /P j ). The goal is to simultaneously maximize P i and α ij . Most research to date has empirically targeted the development of new glassy polymers with improved separation performance. These include thermally rearranged (TR) polymers and polymers of intrinsic microporosity (PIMs).
36 MATERIALS SCIENCE↗
Multi-lab study on the pure-gas permeation of commercial polysulfone (PSf) membranes: Measurement standards and best practices
Gas-separation membranes are a critical industrial component for a low-carbon and energy-efficient future. As a result, many researchers have been testing membrane materials over the past several decades. Unfortunately, almost all membrane-based testing systems are home-built, and there are no widely accepted material standards or testing protocols in the literature, making it challenging to accurately compare experimental results. Further, in this multi-lab study, ten independent laboratories collected high-pressure pure-gas permeation data for H 2 , O 2 , CH 4 , and N 2 in commercial polysulfone (PSf) films. Equipment information, testing procedures, and permeation data from all labs were collected to provide (1) accepted H 2 , O 2 , CH 4 , and N 2 permeability values at 35°C in PSf as a reference standard, (2) statistical analysis of lab-to-lab uncertainties in evaluating permeability, and (3) a list of best practices for sample preparation, equipment set-up, and permeation testing using constant-volume variable-pressure apparatuses. Results summarized in this work provide a reference standard and recommended testing protocols for pure-gas testing of membrane materials.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Engineering Organization of DNA Nano-Chambers through Dimensionally Controlled and Multi-Sequence Encoded Differentiated Bonds
Explore the source record for details and available documents.
99 GENERAL AND MISCELLANEOUS↗
Using Nanofiller Assemblies to Control the Crystallization Kinetics of High-Density Polyethylene
Polyethylene-grafted nanoparticles (NPs) are organized into a variety of assemblies in a polydisperse polyethylene melt by tailoring the graft density and molecular weights of the graft chains. Under these conditions we systematically vary NP assemble state and study is consequences on crystal nucleation and growth rates. We find that the nucleation rate is suppressed below that of the unfilled polymer for good NP spatial dispersion. However, poorer dispersion, which leads to the formation of NP assemblies, can accelerate nucleation likely by providing multiple heterogenous sites due to topographical features. We find that a key parameter, the chain overcrowding in the brush, can predict these nucleation trends – in this language, the most enhanced nucleation rate is found when the grafts are the most overcrowded, and hence the least interpenetrated with the matrix chains. This result is consistent with one other literature result which utilized short crystallizable polyethylene glycol grafts in short PEO matrices. The growth kinetics were retarded for all nanocomposites, their temperature dependences were essentially equal to that for the pure polymer (in the absence of NPs) – the NPs thus do not affect secondary nucleation, indicating that the transport of the matrix to the growth front is the rate determining step. Thus, evidently the increase in matrix viscosity, or reduction in growth rates, is directly determined by the agglomeration state of the NPs. These results are consistent with past works with bare silica NPs in PEO, and with silica NPs grafted with amorphous chains in a PEO matrix, suggesting that growth kinetics in these systems apparently follow “universal” behavior. Additionally, there are initial hints that the ratio of the effective surface area of the NP clusters per unit matrix volume provides a unified description of the NP induced confinement that slows growth kinetics. Furthermore, our work thus shows that there is an evolving understanding of the role of NPs on crystallization kinetics, in particular crystal growth where trends appear to be independent of the grafts ability to crystallize.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗