Search NASA⌕ Search

Engineering topics

Kumar, Vinod

Publications and source records attributed to Kumar, Vinod.

At least 19 records

High Fidelity Computational Model for Fluidized Bed Experiments (Final Report)

MFiX was integrated with preconditioners and linear solver packages in Trilinos via MFIX, Fortran, C, and C++ wrappers. The MFIX wrapper interpreted the structure of the matrix and vector from MFiX while the Fortran wrapper transfers this information to a low-level language, C. C-wrapper transforms the memory semantic between Fortran and C++ language. C++ wrapper passes the matrix and vector to a Trilinos package and gets the solution. This solution was transferred to MFiX via C++, C, Fortran, MFIX wrapper. The framework is used to integrate first, second and third generation linear solvers in Trilinos with MFiX.

20 FOSSIL-FUELED POWER PLANTS↗

On-Sun Testing of a High-Temperature Solar Receiver's Flux Distribution

Concentrated solar power (CSP) is a promising technology in transitioning to renewable energy because of its abundance in nature and thermal energy storage (TES) capability. Among the four types of available CSP technology, including parabolic trough, linear Fresnel, power tower, and parabolic dishes, a power tower using a central receiver has more potential to generate high-temperature heat in a scale supporting power cycles efficiency and achieve low levelized cost of energy (LCOE). Other than the conventional type of receiver design, the high-absorptive receiver concept developed and presented in this paper is novel in its design approach. The novel receiver design originated from National Renewable Energy Laboratory (NREL) consists of an array of solar flux absorb tubes. The solar absorb tubes require uniform flux distribution and in-depth flux penetration through the three different reflective sections of tubes in a hexagonal shape. To evaluate this unique receiver design and thermal performance, the flux distribution, flux uniformity, and intensity were numerically simulated using ansys fluent and SolTrace modeling program. On-sun testing has been done at NREL high flux solar testing facility, based on the computational analysis.

clean energy↗

Data Assimilation Enhancements to Air Force Weather’s Land Information System

The United States Air Force (USAF) has a proud and storied tradition of enabling significant advancements in the area of characterizing and modeling land state information. 557th Weather Wing (557 WW; DoD’s Executive Agent for Land Information) provides routine geospatial intelligence information to warfighters, planners, and decision makers at all echelons and services of the U.S. military, government and intelligence community. 557 WW and its predecessors have been home to the DoD’s only operational regional and global land data analysis systems since January 1958. As a trusted partner since 2005, Air Force Weather (AFW) has relied on the Hydrological Sciences Laboratory at NASA/GSFC to lead the interagency scientific collaboration known as the Land Information System (LIS). LIS is an advanced software framework for high performance land surface modeling and data assimilation of geospatial intelligence (GEOINT) information.

Wegiel, Jerry↗

High Fidelity Computational Model for Fluidized Bed Experiments (Final Report)

MFiX was integrated with preconditioners and linear solver packages in Trilinos via MFIX, Fortran, C, and C++ wrappers. The MFIX wrapper interpreted the structure of the matrix and vector from MFiX while the Fortran wrapper transfers this information to a low-level language, C. C-wrapper transforms the memory semantic between Fortran and C++ language. C++ wrapper passes the matrix and vector to a Trilinos package and gets the solution. This solution was transferred to MFiX via C++, C, Fortran, MFIX wrapper. The framework is used to integrate first, second and third generation linear solvers in Trilinos with MFiX.

97 MATHEMATICS AND COMPUTING↗

Sensitivity of Viscosity on Molten Ti Infusion into a B{sub 4}C-Packed Bed at the Microscale

The effect of the surface tension–viscosity dissipation driving liquid Ti flow into a B{sub 4}C packed bed was analyzed at 1941 K and 2573 K. The model consisted of randomized size distributions of pores (1 to 10 µm) mimicking a packed bed to determine the depth of infusion. Statistical uncertainty was determined as a function of viscosity and pore geometry. The computations were performed with our in-house software, which incorporates a directed acyclic graph and modified nodal analysis algorithms.

36 MATERIALS SCIENCE↗

Effect of Cobalt Content on Thermal, Mechanical, and Microstructural Properties of Al{sub 0.4}FeCrNiCo{sub x} (x = 0, 0.25, 0.5, 1.0 mol) High-Entropy Alloys

Al{sub 0.4}FeCrNiCo{sub x} (x = 0, 0.25, 0.5, 1.0 mol) high-entropy alloys are developed by arc melting route to investigate the effect of cobalt content on thermal, mechanical, and microstructural properties. The phase, microstructure, and chemical composition are analyzed using x-ray diffraction, transmission electron microscope, and scanning electron microscope with attached energy-dispersive x-ray spectrometer. The obtained results have shown that the Al{sub 0.4}FeCrNiCo{sub x} (x = 0-0.5 mol) high-entropy alloys form a simple FCC + BCC-type solid solution and Al{sub 0.4}FeCrNiCo{sub x=1} HEA forms a single-phase FCC structure. The compressive yield strength, microhardness, and thermal conductivity are observed to decrease from 965.22 to 233.37 MPa, 253.6 to 155.6 HV, and from 4.87 to 2.674 W/mK, respectively, whereas the electrical resistivity is observed to increase from 150.30 to 273.74 µΩ-cm with the addition of cobalt from x = 0-1 mol. Differential scanning calorimetry analysis has indicated that the Al{sub 0.4}FeCrNiCo{sub x} (x = 0, 0.25, 0.5, 1.0 mol) high-entropy alloys are thermally stable up to 1000 °C.

36 MATERIALS SCIENCE↗

Investigation on Physical Properties of Sn-Modified Cubic Cu{sub 2}O Nanostructures

Cubic Cu{sub 2−x} Sn{sub x}O (0 ≤ x ≤ 0.4) nanostructures have been developed with the solvothermal method. X-ray diffraction data analysis confirms the formation of a pristine Cu{sub 2}O phase below x=0.3 Sn{sup 2+} substitution, and SnO-related phases appear in 0.3 substitute sample indicating phase segregation starts at x≥0.3. The magnetization versus applied field (M − H) curves have been determined using a vibrating sample magnetometer at 300 K which reveals that ferromagnetic behavior of synthesized nanomaterials is reliant on the substituent concentration and enhanced gradually with its addition in the material. Photoluminescence spectra show that ferromagnetism originates from the induced magnetic moment in defects created as cation vacancies in the host material. Beside these, the dielectric measurements were performed at various frequencies (20 Hz–1 MHz) and in the temperature range of 100 to 350 K.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Compositions, devices, systems and methods for concentrating solar power

Compositions, devices, systems, and methods directed to concentrating solar power are disclosed. In certain aspects, the disclosure is directed to a heat storage material comprising a transformative alloy composition (internal core component) Al—B—Si—Fe/Al2O3—B2O3—SiO2—Fe3O4 embedded in a SiC outer coating.

Bronson, Arturo↗

Hybrid Fixed-Point Fixed-Stress Splitting Method for Linear Poroelasticity

Efficient and accurate poroelasticity models are critical in modeling geophysical problems such as oil exploration, gas-hydrate detection, and hydrogeology. We propose an efficient operator splitting method for Biot’s model of linear poroelasticity based on fixed-point iteration and constrained stress. In this method, we eliminate the constraint on time step via combining our fixed-point approach with a physics-based restraint between iterations. Three different cases are considered to demonstrate the stability and consistency of the method for constant and variable parameters. The results are validated against the results from the fully coupled approach. In case I, a single iteration is used for continuous coefficients. The relative error decreases with an increase in time. In case II, material coefficients are assumed to be linear. In the single iteration approach, the relative error grows significantly to 40% before rapidly decaying to zero. This is an artifact of the approximate solutions approaching the asymptotic solution. The error in the multiple iterations oscillates within 10 − 6 before decaying to the asymptotic solution. Nine iterations per time step are enough to achieve the relative error close to 10 − 7 . In the last case, the hybrid method with multiple iterations requires approximately 16 iterations to make the relative error 5 × 10 − 6 .

Delgado, Paul M.↗

Understanding the Effect of Tungsten on Corrosion Behavior of AlCuCrFeMnW{sub x} High-Entropy Alloys in 3.5 wt.% NaCl Solution

The electrochemical study of AlCuCrFeMnW{sub x} (x = 0, 0.05, 0.1, 0.5, 1 mol) high-entropy alloys (HEA) is performed in 3.5 wt.% NaCl solution at room temperature (25 °C). The potentiodynamic polarization curve of the AlCuCrFeMnW{sub x} (x = 0, 0.05, 0.1, 0.5, 1 mol) alloys obtained in 3.5 wt.% NaCl solution shows that the corrosion resistance of the tungsten (W)-free HEA is lower than the alloys containing W. It is observed that W forms solid WO{sub 3} layer in the outer region of the film in a 3.5 wt.% NaCl. The scanning electron microscopy and infrared spectroscopy confirmed the electrochemical results. The electrochemical impedance spectroscopy of these alloys had one capacitive loop, which represented the presence of electrical double layer.

36 MATERIALS SCIENCE↗

High Fidelity Computational Model for Fluidized Bed Experiments

MFiX was integrated with preconditioners and linear solver packages in Trilinos via MFiX, Fortran, C, and C++ wrappers. The MFiX wrapper interpreted the structure of the matrix and vector from MFiX while the Fortran wrapper transfered this information to a low-level language, C. The C-wrapper transformed the memory semantic between Fortran and C++ language. The C++ wrapper passed the matrix and vector to a Trilinos package and got the solution. This solution was transferred to MFiX via C++, C, Fortran, MFiX wrapper. The framework was used to integrate first, second, and third generation linear solvers in Trilinos with MFiX.

20 FOSSIL-FUELED POWER PLANTS↗

Tailoring the Structural, Optical and Magnetic Properties of NiFe{sub 2}O{sub 4} by Varying Annealing Temperature

Magnetic nanocrystalline NiFe{sub 2}O{sub 4} nanoparticles of size ranging between 13 and 19 nm were synthesized by the hydrothermal method using polyethylene glycol (PEG) as surfactant. The role of annealing on phase, crystallite size, and morphology was determined by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Energy-dispersive X-ray spectroscopy (EDX) was used for qualitative analysis. X-ray diffraction confirmed the single phase of as-obtained particles. TEM revealed a spherical morphology having an average particle size of 13.73 nm at 523 K and rises to 14.89, 16.42, and 21.14 nm at 623, 723, and 823 K respectively, which is approximately the same as the crystallite size determined from XRD. EDX results confirmed that elemental ratios were in stoichiometry. Fourier transform infrared (FTIR) spectral analysis demonstrates the formation of M-O bond in NiFe{sub 2}O{sub 4} nanoparticles. The optical spectra obtained from UV-visible spectroscopy revealed that nanoparticles have direct allowed energy band gap of 2.34, 2.47, 2.70, and 2.20 eV at 523, 623, 723, and 823 K respectively. A vibrating sample magnetometer (VSM) was used at room temperature for magnetic measurements which further showed ferromagnetic behavior of as-synthesized material. In addition, it was found that saturation magnetization increases with an increase of annealing temperature while coercivity decreases with temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Performance of preconditioned iterative solvers in MFiX–Trilinos for fluidized beds

MFiX, a general-purpose Fortran-based suite, simulates the complex flow in fluidized bed applications via BiCGStab and GMRES methods along with plane relaxation preconditioners. Trilinos, an object-oriented framework, contains various first- and second-generation Krylov subspace solvers and preconditioners. We developed a framework to integrate MFiX with Trilinos as MFiX does not possess advanced linear methods. The framework allows MFiX to access advanced linear solvers and preconditioners in Trilinos. The integrated solver is called MFiX–Trilinos, here after. In the present work, we study the performance of variants of GMRES and CGS methods in MFiX–Trilinos and BiCGStab and GMRES solvers in MFiX for a 3D gas–solid fluidized bed problem. Two right preconditioners employed along with various solvers in MFiX–Trilinos are Jacobi and smoothed aggregation. The flow from MFiX–Trilinos is validated against the same from MFiX for BiCGStab and GMRES methods. And, the effect of the preconditioning on the iterative solvers in MFiX–Trilinos is also analyzed. In addition, the effect of left and right smoothed aggregation preconditioning on the solvers is studied. Finally, the performance of the first- and second-generation solver stacks in MFiX–Trilinos is studied as well for two different problem sizes.

97 MATHEMATICS AND COMPUTING↗

Nano-size Analysis through Magnetization Data for Developed Mn{sub 0.5}Zn{sub 0.5}X{sub 0.2}Fe{sub 1.8}O{sub 4} (X = Fe, Gd, La, Sm)

Mn{sub 0.5}Zn{sub 0.5}X{sub 0.2}Fe{sub 1.8}O{sub 4} (X = Fe, Gd, La, Sm) nano-ferrite were synthesized by chemical co-precipitation method. Magnetic measurements for the synthesized Mn{sub 0.5}Zn{sub 0.5}X{sub 0.2}Fe{sub 1.8}O{sub 4} (X = Fe, Gd, La, Sm) nano-particles were recorded at temperatures 10 and 300 K. Magnetic moment per unit formula in terms of Bohr magnetron (μ{sub B}) was calculated from magnetization data of hysteresis loops. Particle size was calculated from the magnetization data for all compositions of Mn{sub 0.5}Zn{sub 0.5}X{sub 0.2}Fe{sub 1.8}O{sub 4} (X = Fe, Gd, La, Sm) ferrite particles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗