Search NASA⌕ Search

Engineering topics

Kuno, Masaru

Publications and source records attributed to Kuno, Masaru.

18 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Resonant Multiple-Phonon Absorption Causes Efficient Anti-Stokes Photoluminescence in CsPbBr 3 Nanocrystals

Lead halide perovskite nanocrystals, such as CsPbBr 3 , exhibit efficient photoluminescence (PL) up-conversion, also referred to as anti-Stokes photoluminescence (ASPL). This is a phenomenon where irradiating nanocrystals up to 100 meV below gap results in higher energy band edge emission. Most surprising is that ASPL efficiencies approach unity and involve single-photon interactions with multiple phonons. This is unexpected given the statistically disfavored nature of multiple-phonon absorption. Here, in this study, we report and rationalize near-unity anti-Stokes photoluminescence efficiencies in CsPbBr 3 nanocrystals and attribute them to resonant multiple-phonon absorption by polarons. The theory explains paradoxically large efficiencies for intrinsically disfavored, multiple-phonon-assisted ASPL in nanocrystals. Moreover, the developed microscopic mechanism has immediate and important implications for applications of ASPL toward condensed phase optical refrigeration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Modeling the Photoelectrochemical Evolution of Lead-Based, Mixed-Halide Perovskites Due to Photosegregation

Lead-based, mixed-halide perovskites such as methylammonium lead iodide-bromide [MAPb(I 1-x Br x ) 3 ] undergo anion photosegregation under illumination. This is observed as low band gap photoluminescence from photogenerated iodine-rich domains due to favorable band offsets that induce carrier funneling into them. Unfortunately, theoretical rationalizations of mixed-halide photosegregation are complicated by biases inherent to photoluminescence-based observations. Recent compositionally-weighted X-ray diffraction (XRD) measurements now reveal broad distributions of photosegregated stoichiometries not captured by existing photosegregation models. To better bridge experiment and theory, we perform kinetic Monte Carlo (KMC) simulations of photosegregation within the context of a band gap-based thermodynamic model, which has previously accounted for numerous experimental observations. Our KMC simulations are modified to consider high carrier density Fermi-Dirac statistics that result from carrier funneling and accumulation within photosegregated I-rich domains. Obtained KMC results reproduce broad x terminal distributions seen experimentally and illustrate how they are characterized by a central, heavily I-enriched stoichiometry. I-rich domain “drifting” during photosegregation rationalizes the long photosegregation timescales seen experimentally with drifting simultaneously producing a wake of variable stoichiometry I-rich inclusions that form the lion’s share of stoichiometric heterogeneities seen in compositionally-weighted XRD measurements. These simulations and accompanying rationalizations further reveal a general criterion for realizing favorable free energies to induce demixing. Central to the criterion is the statistical occupation of low gap inclusions in the parent alloy by excitations. Furthermore, the resulting model thus provides a general framework for conceptualizing mixed-halide perovskite light and temperature sensitivities, mediated by photocarriers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Thermodynamic Band Gap Model for Photoinduced Phase Segregation in Mixed-Halide Perovskites

Provided is a comprehensive description of a band gap thermodynamic model, which predicts and explains key features of photosegregation in lead-based, mixed-halide perovskites. The model gives a prescription for illustrating halide migration driven by photocarrier energies. Where possible, model predictions are compared with experimental results. Free energy derivations are provided for three assumptions: (1) halide mixing in the dark, (2) a fixed number of photogenerated carriers funneling to and localizing in low band gap inclusions of the alloy, and (3) the statistical occupancy of said inclusions from a bath of thermalized photocarriers in the parent material. Model predictions include excitation intensity (I exc )-dependent terminal halide stoichiometries (x terminal ), temperature-independent x terminal , excitation intensity thresholds (I exc,threshold ) below which photosegregation is suppressed, and reduced segregation in nanocrystals as compared to thin films. Here, the model also offers insight into kinetically manipulating photosegregation rates via control of underlying mediators and rationalizes asymmetries in forward and reverse photosegregation rate constants/activation energies. What emerges is a cohesive framework for understanding ubiquitous photosegregation in mixed-halide perovskites and a rational basis by which to manage the phenomenon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Hyperspectral and Nanosecond Temporal Resolution Widefield Infrared Photothermal Heterodyne Imaging

Label-free, bond-selective imaging offers new opportunities for fundamental and applied studies in chemistry, biology, and materials science. Preventing its broader application to investigating spectrally congested specimens are issues related to low sensitivity as well as low spatial and temporal resolution. Here, we demonstrate a widefield, mid-infrared (MIR) photothermal imaging technique, called widefield Infrared Photothermal Heterodyne imaging (wIR-PHI), that massively parallelizes acquisition of MIR absorption data through use of a high-speed complementary metal-oxide-semiconductor camera. wIR-PHI possesses notable features that include: spatial resolution significantly below the MIR diffraction limit, hyperspectral imaging capabilities, high sensitivity, and ~100 ns temporal resolution. Here, the first two features are highlighted by hyperspectral imaging of proximally close poly(methyl methacrylate) (PMMA) and polystyrene (PS) nanoparticles where clear, bond-specific imaging of nanoparticles, separated by less than the MIR diffraction limit, is demonstrated. Sensitivity is highlighted by imaging individual PMMA and PS nanoparticles with radii between r = 97-556 nm. This leads to a current, peak absorption cross-section limit-of-detection of σ abs = 1.9× 10 –16 cm 2 . wIR-PHI's 100 ns temporal resolution is simultaneously demonstrated by observing the decay of photothermal contrast on individual nanoparticles on a ~200-6000 ns timescale. In whole, wIR-PHI’s dramatic increase in acquisition speed opens opportunities for future MIR kinetic imaging and spectroscopic studies of important chemical, biological, and material processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Mixed Ligand Passivation as the Origin of Near-Unity Emission Quantum Yields in CsPbBr 3 Nanocrystals

Key features of syntheses, involving the quaternary ammonium passivation of CsPbBr 3 nanocrystals (NCs), include stable, reproducible and large (often near-unity) emission quantum yields (QYs). The archetypical example involves didodecyl dimethyl ammonium (DDDMA + ) passivated CsPbBr 3 NCs where robust QYs stem from interactions between DDDMA + and NC surfaces. Despite widespread adoption of this synthesis, specific ligand-NC surface interactions responsible for large DDDMA + -passivated NC QYs have not been fully established. Multidimensional nuclear magnetic resonance experiments now reveal a new DDDMA + -NC surface interaction, beyond established “tightly-bound” DDDMA + interactions, which strongly affects observed emission QYs. Depending upon the existence of this new DDDMA + coordination, NC QYs vary broadly between 60% and 85%. More importantly, these measurements reveal surface passivation through unexpected didodecyl ammonium (DDA + ) that works in concert with DDDMA + , to produce near unity (i.e. >90%) QYs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Excitation Intensity- and Size-Dependent Halide Photosegregation in CsPb(I 0.5 Br 0.5 ) 3 Perovskite Nanocrystals

Although broad consensus exists that photoirradiation of mixed-halide lead perovskites leads to anion segregation, no model today fully rationalizes all aspects of this near ubiquitous phenomenon. In this work, we quantitatively compare experimental, CsPb(I 0.5 Br 0.5 ) 3 nanocrystal (NC) terminal anion photosegregation stoichiometries and excitation intensity thresholds to a band gap-based, thermodynamic model of mixed-halide perovskite photosegregation. Mixed-halide NCs offer strict tests of theory given physical sizes, which dictate local photogenerated carrier densities. We observe that mixed-anion perovskite NCs exhibit significant robustness to photosegregation, with photosegregation propensity decreasing with decreasing NC size. Observed size- and excitation intensity-dependent photosegregation data agree with model predicted size- and excitation intensity-dependent terminal halide stoichiometries. Established correspondence between experiment and theory, in turn, suggests that mixed-halide perovskite photostabilities can be predicted a priori using local gradients of (empirical) Vegard’s law expressions of composition-dependent band gaps.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Phase Segregation and Sequential Expulsion of Iodide and Bromide in Photoirradiated Ruddlesden–Popper 2D Perovskite Films

Two-dimensional (2D) Ruddlesden–Popper mixed-halide perovskite films, BA 2 PbBr 2 I 2 , undergo phase segregation when excited with visible light to generate bromide- and iodide-rich regions, as marked by absorption and emission changes. Upon stopping illumination, the process reverses, allowing original film compositions to be restored. However, if films are in contact with dichloromethane, light irradiation causes the sequential expulsion of iodide and bromide and introduces irreversible changes to the 2D films. The sequential disappearance of I– and Br– from pristine films (BA 2 Pb 2 Br 4 and BA 2 Pb 2 I 4 ) under photoirradiation, as observed from variances in expulsion rates, reflects differences in halide ion mobilities in these films. The photoinstability of 2D films raises questions about their use in stabilizing bulk, three-dimensional (3D) perovskite solar cells through 3D/2D interfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2022

No One Size Fits All: Semiconductor Nanocrystal Sizing Curves

Although colloidal quantum dots or nanocrystals (NCs) are now long past their infancy, there remain basic issues that must be addressed to fully establish their fundamental, size-dependent properties. This is especially true for model systems such as CdSe where confinement effects are responsible for changes in their optical response and where significant effort has been invested in developing theories of their underlying electronic structure. Surprisingly, there still appears to be a lack of consensus on one of the most fundamental metrics for NCs, their sizing curves. As shown here, these are empirical functions that link the size of isotropically shaped semiconductor NCs (such as the diameter, d, for spherical NCs and edge length, l, for cube-shaped ones) to corresponding changes in optical response.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Distinguishing Models for Mixed Halide Lead Perovskite Photosegregation via Terminal Halide Stoichiometry

Photoinduced halide segregation in mixed halide hybrid perovskites [i.e., APb(I 1–x Br x ) 3 ] represents an intrinsic instability that impedes their commercialization. Resolving this issue requires developing a microscopic understanding of the phenomenon. Key to this is distinguishing existing models of halide photosegregation by comparing their corresponding predictions to experiment. In this work, we test the temperature dependency of predicted perovskite terminal stoichiometries (x terminal ), following photosegregation, in single and double cation mixed halide perovskites. Our results show a general temperature invariance of x terminal . This largely supports the idea that band gap difference between parent and halide-segregated perovskite phases drives photosegregation. Beyond this, careful examination of temperature- and halide composition-dependent emission energies suggests an alternative explanation for the enhanced photostability of mixed cation/mixed halide perovskites, linked to band gap energy differences between parent and phase-segregated perovskite phases. Together, our results make inroads in clarifying the microscopic origin of mixed halide perovskite photosegregation and pave the way toward approaches that stabilize their use in applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Modulation of Photoinduced Iodine Expulsion in Mixed Halide Perovskites with Electrochemical Bias

Hole trapping at iodine (I) sites in MAPbBr 1.5 I 1.5 mixed halide perovskites (MHP) is responsible for iodine migration and its eventual expulsion into solution. We have now modulated the photoinduced iodine expulsion in MHP through an externally applied electrochemical bias. At positive potentials, electron extraction at TiO 2 /MHP interfaces becomes efficient, leading to hole buildup within MHP films. This improved charge separation, in turn, favors iodine migration as evident from the increased apparent rate constant of iodine expulsion (k expulsion = 0.0030 s –1 ). Conversely, at negative potentials (-0.3 V vs Ag/AgCl) electron–hole recombination is facilitated within MHP, slowing down iodine expulsion by an order of magnitude (k expulsion = 0.00018 s –1 ). The tuning of the EFermi level through external bias modulates electron extraction at the TiO 2 /MHP interface and indirectly controls the buildup of holes, ultimately inducing iodine migration/expulsion. Suppressing iodine migration in perovskite solar cells is important for attaining greater stability since they operate under internal electrical bias.

14 SOLAR ENERGY↗
DOE OSTI2021

Halide Ion Migration in Perovskite Nanocrystals and Nanostructures

The optical and electronic properties of metal halide perovskites provide insight into the operation of solar cells as well as their long-term operational stability. Halide mobility in perovskite films is an important factor influencing solar cell performance. One can visualize halide ion migration through halide exchange between two nanocrystal suspensions or between physically paired films of two different metal halide perovskites. The ability to tune band gap by varying halide ratios (Cl:Br or Br:I) allows the synthesis of mixed halide perovskites with tailored absorption and emission across the entire visible spectrum. Interestingly, mixed halide (e.g., MAPb(Br 0.5 I 0.5 ) 3 ) films undergo phase segregation to form Br-rich and I-rich sites under steady state illumination. Upon halting illumination, segregated phases mix to restore original mixed halide compositions. Introducing multiple cations (Cs, formamidinium) at the A site or alloying with Cl greatly suppresses halide mobilities. Long-term irradiation of MAPb(Br 0.5 I 0.5 ) 3 films also cause expulsion of iodide leaving behind Br-rich phases. Hole trapping at I-rich sites in MAPb(Br 0.5 I 0.5 ) 3 is considered to be an important step in inducing halide mobility in photoirradiated films. Finally, this Account focuses on halide ion migration in nanocrystals and nanostructured films driven by entropy of mixing in dark and phase segregation under light irradiation.

14 SOLAR ENERGY↗
DOE OSTI2020

Thermal Decoherence of Superradiance in Lead Halide Perovskite Nanocrystal Superlattices

Recent experiments by Rainò et al. have documented cooperative emission from CsPbBr 3 nanocrystal superlattices, exhibiting the hallmarks of low-temperature superradiance. In particular, the optical response is coherent and the radiative decay rate is increased by a factor of 3, relative to that of individual nanocrystals. However, the increase is 6 orders of magnitude smaller than what is theoretically expected from the superradiance of large assemblies, consisting of 10 6 –10 8 interacting nanocrystals. In this report we develop a theoretical model of superradiance for such systems and show that thermal decoherence is largely responsible for the drastic reduction of the radiative decay rate in nanocrystal superlattices. Our theoretical approach explains the experimental results, provides insight into the design of small nanocrystal superlattices, and shows a 4 orders of magnitude enhancement in superradiant response. These quantitative predictions pave the path toward observing superradiance at higher temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Suppressing Cation Migration in Triple-Cation Lead Halide Perovskites

Ion migration represents an intrinsic instability of metal halide perovskite solar cells. In this work, we show that triple-cation FA x MA y Cs 1–x–y PbI 3 [FA + = (NH 2 ) 2 CH + , MA + = CH 3 NH 3 + ] active layers with mixed orthorhombic, post-perovskite (δ ortho -CsPbI 3 ), and cubic perovskite (α) phases (i.e., α/δ-phase FA x MA y Cs 1–x–y PbI 3 ) exhibit improved cation stability against applied bias relative to pure α-phase perovskites (i.e., FA 0.85 Cs 0.15 PbI 3 and FA 0.76 MA 0.15 Cs 0.09 PbI 3 ). Infrared photothermal heterodyne imaging and time-of-flight secondary ion mass spectrometry are used to visualize exclusive α-phase perovskite lateral device A + cation accumulation (depletion) at perovskite negative (positive) electrode interfaces. The resulting compositional heterogeneities lead to degradation. Operational stability testing of solar cells reveals similar degradation behavior; α/δ-phase FA x MA y Cs 1–x–y PbI 3 lateral devices/solar cells, by contrast, show improved stabilities. Enhanced α/δ-FA x MA y Cs 1–x–y PbI 3 stability is rationalized by δortho-phase inclusions, acting as barriers through which A + cations do not easily migrate. This study thus provides new insights into cation migration in FA x MAyCs 1–x–y PbI 3 perovskites and suggests a materials design strategy toward suppressing cation instabilities in hybrid perovskites.

14 SOLAR ENERGY↗
DOE OSTI2020

Universal Size-Dependent Stokes Shifts in Lead Halide Perovskite Nanocrystals

Size-dependent photoluminescence Stokes shifts (Δ E s ) universally exist in CsPbX 3 (X = Cl – , Br – , or I – ) perovskite nanocrystals (NCs). Δ E s values, which range from ~15 to 100 meV for NCs with average edge lengths ( l ) from approximately 13 to 3 nm, are halide-dependent such that Δ E s (CsPbI 3 ) > Δ E s (CsPbBr 3 ) ≳ Δ E s (CsPbCl 3 ). Observed size-dependent Stokes shifts are not artifacts of ensemble size distributions as demonstrated through measurements of single CsPbBr 3 NC Stokes shifts ((Δ E s ) = 42 ± 5 meV), which are in near quantitative agreement with associated ensemble ( l = 6.8 ± 0.8 nm) Δ E s values (Δ E s ≈ 50 meV). Transient differential absorption measurements additionally illustrate no significant spectral dynamics on the picosecond time scale that would contribute to Δ E s . This excludes polaron formation as being responsible for Δ E s . Overall, the results point to an origin for Δ E s , intrinsic to the size-dependent electronic properties of individual perovskite NCs.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Superlattices are Greener on the Other Side: How Light Transforms Self-Assembled Mixed Halide Perovskite Nanocrystals

Perovskite nanocrystal superlattices (NC SLs) are the nearest real-world approximations to monodisperse NC ensembles. NC SLs thus represent ideal model systems for evaluating the optical and structural stability of CsPb(I 1– x Br x ) 3 NCs at a macroscopic level. Here, photoinduced changes to CsPb(I 1– x Br x ) 3 NC SLs (0 < x < 1.0) are probed via in situ photoluminescence, X-ray diffraction, and electron microscopy. We find that prolonged (~10–20 h) ultraviolet–visible irradiation causes irreversible PL blueshifts, photobrightening, and crystal structure contractions. These changes stem from gradual photoinduced I 2 sublimation, which transforms CsPb(I 1– x Br x ) 3 into CsPbBr 3 . Despite eliminating half of the initial halides from individual CsPb(I 0.53 Br 0.47 ) 3 particles, NCs within SLs remarkably preserve their initial crystallinity, cuboidal shapes, edge lengths, and size distributions. This work illustrates compositional control toward generating precisely engineered perovskite NC SLs. It also highlights iodide photo-oxidation as a hurdle that must be overcome if mixed halide perovskite nanomaterials are to be applied beyond fundamental studies.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Photoinduced Anion Segregation in Mixed Halide Perovskites

Alloyed lead halide perovskites have taken a dominant role in the quest for third-generation solar cells. This is due to optimal light-harvesting properties, which can be tuned across the visible spectrum by mixing halide (X = Cl – , Br – , and I – ) anions and A + cations (A + = FA + , MA + , and Cs + ). Durability issues related to ion movement within the perovskite lattice, however, impede large-scale commercialization. Uniformly mixed halide perovskites [e.g., APb(I 1– x Br x ) 3 ] reversibly segregate into narrow bandgap I-rich and wide bandgap Br-rich domains during continuous visible illumination. Subsequent I-rich domains reduce local open circuit voltages and decrease mixed halide perovskite solar cell power conversion efficiencies. In this review, we assess the known effects of halide segregation on the structural and optical properties of mixed halide materials, discuss ongoing research to suppress the phenomenon, and finally provide a mechanistic overview of its underlying origins.

36 MATERIALS SCIENCE↗