Search NASA⌕ Search

Engineering topics

Kurkov, A.

Publications and source records attributed to Kurkov, A..

Effects of mistuning on blade torsional flutter

An analytical model for the prediction of fan blade flutter is presented and evaluated using data from NASA tests on an advanced high performance engine. For the cascade conditions appropriate to the test points studied, the aerodynamic theory cannot predict subcritical flutter. Under the assumptions of a tuned assembly, the imaginary part of the aerodynamic coefficients does indicate flutter for a limited number of interblade phase angles, but these interblade phase angles are close to those at which the acoustic resonance is predicted. Upon using the individual blade frequencies and solving the mistuned system with aerodynamic coupling only, the results show a stable system. Eigenvectors calculated for the mistuned system demonstrate the presence of several harmonics in each mistuned mode. Inclusion of both mechanical and aerodynamic coupling in the solution of the eigenproblem influences not only the frequencies but also damping in the system with a trend toward stability.

Srinivasan, A. V.↗

Synthesis of blade flutter vibratory patterns using stationary transducers

Flutter frequency was determined and rotor vibratory amplitude and phase distributions during flutter were reconstructed from stationary aerodynamic type measurements. A previously reported optical method for measuring blade-tip displacement during flutter was extended by means of digital analysis. Displacement amplitudes and phase angle were determined based on this method. For selected blades, spectral results were also obtained from strain gage measurements. The results from these three types of measurement were compared and critically evaluated.

Kurkov, A.↗

Synthesis of blade flutter vibratory patterns using stationary transducers

Flutter frequency was determined and rotor vibratory amplitude and phase distributions during flutter were reconstructed from stationary aerodynamic type measurements. A previously reported optical method for measuring blade-tip displacement during flutter was extended by means of digital analysis. Displacement amplitudes and phase angles were determined based on this method. For selected blades, spectral results were also obtained from strain gage measurements. The results from these three types of measurement were compared and critically evaluated.

Kurkov, A.↗