Search NASA⌕ Search

Engineering topics

Kurt W Leucht

Publications and source records attributed to Kurt W Leucht.

7 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Design of an Excavation Robot: Regolith Advanced Surface Systems Operations Robot (RASSOR) 2.0

To continue on a sustainable and flexible path, NASA needs to address the challenge of collecting and moving large amounts of regolith at the destination. Acquiring the water resources on Mars will require mining significant quantities of regolith and this is not possible with the state-of-the-art low mass excavation systems. Low gravity environments (Mars = 3/8 G) and launch mass restrictions limit the traction and the resulting reaction force of the vehicle, making current terrestrial techniques impractical. This project addressed this challenge by developing a completely new technology that can mine large quantities of regolith on Mars. Recent measurements by the “Curiosity” rover on Mars have found that the regolith contains ~ 2% water by weight globally, ~4% in Jezero Crater (Human Architecture Team’s reference landing site), and much more at the poles(Leshin et al, 2013). RASSOR 2.0 is a planetary excavator, which has a mass of 66 kg, with a 0.38 kg vehicle mass per kilogram, per hour of excavation rate and power usage of 4 W per kg of regolith excavation rate. A single RASSOR 2.0 can excavate a minimum of 2.7 metric tons of regolith per day.This is accomplished by using counteracting excavation forces on two opposing digging implements called bucket drums and an autonomous mining control system. This work has addressed several major research areas outlined in the NASA Technology Area (TA) 04 Robotics & Autonomous Systems and TA 07 Human Destination Systems roadmaps. This project started at Technology Readiness Level (TRL) 4 as a low fidelity “proof of concept” prototype which has successfully demonstrated basic regolith simulant excavation functionality in a lab-scale gravity off load test. The foundational technology described here was awarded US patent number: US 9027265 for a “Zero horizontal reaction force excavator” on May 12, 2015.

RASSOR↗
NASA NTRSDate not supplied

ICE-RASSOR: Intelligent Capabilities Enhanced Regolith Advanced Surface Systems Operations Robot

NASA’s Regolith Advanced Surface Systems Operations Robot (RASSOR) is principally designed to mine and deliver regolith for In-Situ Resource Utilization (ISRU)processing. RASSOR’s design enables it to efficiently collect and deposit regolith, return collected material for processing, and myriad related ISRU activities. To reliably perform these operations on the lunar surface, RASSOR software and sensory systems need to be robust and maximize the information extracted from a reduced sensor payload. Herein, we present preliminary findings from the Intelligent Capabilities Enhanced RASSOR project. We apply supervised learning using real data to estimate the soil mass collected without the need for mass flow rate monitors or other explicate sensing techniques. We also create a reduced-order simulation environment to develop autonomous trenching controllers via reinforcement learning and prototype state estimation architectures. Our initial results suggest that excavated regolith mass can be inferred within 2.9% RMS error of full scale, and reinforcement learning for autonomous operations has learned viable trenching strategies and helped identify desirable sensing capabilities, arrangements, and considerations. Future work includes regolith mass estimation during dynamic operation, expanding our simulation to more complex environments, and transfer learning from simulation to hardware.

machine learning↗
NASA NTRSDate not supplied

Overview of NASA's Break the Ice Lunar Challenge

The goal of NASA’s Artemis program is to return to the Moon and put in place a sustainable infrastructure that will enable permanent presence on the Moon. In-Situ Resource Utilization (ISRU) is critical in making the permanent presence on the Moon possible. One of the most important of these resources is water. On the Moon, water is trapped in icy regolith at the lunar poles, including inside permanently dark and cold craters. Excavating icy regolith and extracting water from it needs development of technologies that can operate reliably in the extreme lunar environmental conditions. Prize competitions are a well-known way of accelerating the development of new technologies and have been successfully used throughout the history. NASA’s Centennial Challenges Program(CCP) has been developing and executing prize competitions for past 15 years. Several of these competitions resulted in breakthrough technologies for in-space and terrestrial applications. In 2019, NASA Space Technology Mission Directorate (STMD) tasked CCP to develop a challenge to address the technology gaps in the areas of Lunar Excavation, Manufacturing, and Construction. This paper provides the background, status and ongoing plans by CCP in developing “Break the Ice Lunar Challenge”. The challenge is scheduled to open for registration in late 2020. This challenge will enable the development of excavation technologies that can operate in the extreme conditions on the Moon.

centennial challenges↗
NASA NTRSDate not supplied

ISRU Pilot Excavator: Bucket Drum Scaling Experimental Results

NASA’s Space Technology Mission Directorate (STMD) is funding the development of a robotic excavator called the “ISRU Pilot Excavator” which will be a technology demonstration of excavating and transporting 10 metric tons of lunar regolith on the surface of the moon with a 30k-class robotic excavator. ISRU Pilot Excavator will be the next generation of robotic excavator to use bucket drums as excavation tools. This is an evolution of the Regolith Advanced Surface Systems Operations Robot (RASSOR) developed at NASA’s Kennedy Space Center. Bucket drums are hollow cylinders with regularly spaced scoops around the perimeter. The drums rotate in one direction to collect regolith with the scoops. The regolith slides down an internal baffling system inside the drum which prevents the regolith from falling back out of the scoops. The captured regolith can then be transported while held in the drum and then deposited by rotating the drum in the opposite direction allowing the regolith to slide back down the baffling and out of the excavation scoops. Bucket drums were developed by Lockheed Martin in 2008 and used on multiple robotic excavator prototypes ever since. However the forces on a bucket drum and considerations for scaling have not been measured in detail. Bucket drums are challenging to model using classical blade\bucket equations because of their unique geometry. Therefore this experiment was performed to measure the forces on three bucket drums of the same geometry at different scales. Small: 9.4” (239mm) dia. x 8.1” (206mm) width, Medium: 11.6” (294mm) dia. x 10” (254mm) width, and Large: 17” (432mm) dia. x 14.1”(358mm) width. The test stand consisted of an actuated gantry with controlled motion in the vertical (Z) and horizontal (X) axes and a single rotation axis (R). The bucket drums were individually mounted to the rotary axis of the test stand and translated across a prepared bed of BP-1 lunar regolith simulant at a specified linear speed and cutting depth. The test stand was outfitted with a torque sensor in line with the rotation of the drum (R) and a 3 axis (X, Y, and Z) load cell. In addition to the three sizes of bucket drums the linear excavation speed and cutting depth were test variables. The results of these experiments show the relationship between the three scales of bucket drums for factors such as: excavation force, torque due to regolith rotation inside the drum, excavation energy, time to fill, etc. and will be discussed in detail in this paper. This fundamental data will be used in the design of the ISRU Pilot Excavator and can inform the design of future bucket drum excavators.

Jason Michael Schuler↗
NASA NTRSDate not supplied

Mass Inferencing Model Creation and Deployment to the RASSOR Lunar Excavation Robot

The Regolith Advanced Surface Systems Operations Robot (RASSOR) Excavator is a mobile robotic bucket-drum excavator platform with a unique space regolith excavation capability. The Intelligent Capabilities Enhanced RASSOR research project developed functionality for estimating the quantity of regolith mass ingested during RASSOR operation, enhancing RASSOR’s ability to successfully complete In-Situ Resource Utilization (ISRU) missions. To teleoperate or run autonomously, it is crucial for the amount of regolith mass ingested to be available as a system state for efficient operation. For example, during autonomous operation, RASSOR should navigate and move to a processing plant to offload the collected regolith when the drums are full; without knowledge of the total mass in the drums, this type of high-level planning is not possible. Three distinct modeling approaches were employed in developing a mass inferencing approach that could work on RASSOR, none of which require modification to the hardware. All take in system states, such as arm/drum motor positions, velocities, currents, voltages, and robot pose, and output a mass prediction for each set of the robot’s bucket drums. The developed models run in real-time, outputting predictions for the front drum mass, rear drum mass, timestamp of the last prediction, and total drum mass (sum of front and rear) in RASSOR’s drums. Models deployed to the hardware have low error (<7.5% mean error over the mass range, and <2.6% mean error when drums are more than half full) when making predictions in real-time. Our modeling approach can be adapted to use lunar excavation data to create models that are reflective of RASSOR’s dynamics when operating on the lunar surface. The results of this work are promising and show that models can be developed to accurately estimate excavated regolith mass.

Bucket Drum Excavators↗
NASA NTRSDate not supplied

Mass Inferencing Model Creation and Deployment to the RASSOR Lunar Excavation Robot

The Regolith Advanced Surface Systems Operations Robot (RASSOR) Excavator is a mobile robotic bucket-drum excavator platform with a unique space regolith excavation capability. The Intelligent Capabilities Enhanced RASSOR research project developed functionality for estimating the quantity of regolith mass ingested during RASSOR operation, enhancing RASSOR’s ability to successfully complete In-Situ Resource Utilization (ISRU) missions. To teleoperate or run autonomously, it is crucial for the amount of regolith mass ingested to be available as a system state for efficient operation. For example, during autonomous operation, RASSOR should navigate and move to a processing plant to offload the collected regolith when the drums are full; without knowledge of the total mass in the drums, this type of high-level planning is not possible. Three distinct modeling approaches were employed in developing a mass inferencing approach that could work on RASSOR, none of which require modification to the hardware. All take in system states, such as arm/drum motor positions, velocities, currents, voltages, and robot pose, and output a mass prediction for each set of the robot’s bucket drums. The developed models run in real-time, outputting predictions for the front drum mass, rear drum mass, timestamp of the last prediction, and total drum mass (sum of front and rear) in RASSOR’s drums. Models deployed to the hardware have low error (<7.5% mean error over the mass range, and <2.6% mean error when drums are more than half full) when making predictions in real-time. Our modeling approach can be adapted to use lunar excavation data to create models that are reflective of RASSOR’s dynamics when operating on the lunar surface. The results of this work are promising and show that models can be developed to accurately estimate excavated regolith mass.

bucket drum excavators↗