MatCal Users Guide: Release 1.3.0
Any continuum mechanics model will require three components: (1) a discretized geometry of the boundary value problem being studied, (2) the partial differential equations to be solved, and (3) the initial conditions and boundary conditions for the problem. To describe material behavior in these computational models, material models contribute to (2) the underlying equations and, occasionally, to (3) the initial conditions for the simulation. These material models can exhibit a mathematical form that is empirically based, based on first principles, or developed from both empirical observations and known physics. In general, these models are meant to represent a class of materials with well understood behavior. As a result, material models have parameters that must be tuned or calibrated so that the model response matches characterization data available for the specific material it is intended to represent when used to simulate a specific system. For simple models, such as isotropic, linear elastic materials in solid mechanics, this calibration process can be a simple analytical calculation directly extracting the parameters from experimental measurements. For complex models that have many inputs and require many characterization datasets to adequately identify the material behavior, the model calibration process can require an inverse problem approach where an optimization is performed to tune the model parameters to the available data.