Search NASA⌕ Search

Engineering topics

Kushner, Mark J

Publications and source records attributed to Kushner, Mark J.

A hierarchal model for bacterial cell inactivation in solution by direct and indirect treatment using cold atmospheric plasmas

Cold atmospheric plasma devices have shown promise for a variety of plasma medical applications, including wound healing and bacterial inactivation often performed in liquids. In the latter application, plasma-produced reactive oxygen and nitrogen species (RONS) interact with and damage bacterial cells, though the exact mechanism by which cell damage occurs is unclear. Computational models can help elucidate relationships between plasma-produced RONS and cell killing by enabling direct comparison between dissimilar plasma devices and by examining the effects of changing operating parameters in these devices. In biological applications, computational models of plasma-liquid interactions would be most effective in design and optimization of plasma devices if there is a corresponding prediction of the biological outcome. In this work, we propose a hierarchal model for planktonic bacterial cell inactivation by plasma produced RONS in liquid. A previously developed reaction mechanism for plasma induced modification of cysteine was extended to provide a basis for cell killing by plasma-produced RONS. Results from the model are compared to literature values to provide proof of concept. Differences in time to bacterial inactivation as a function of plasma operating parameters including gas composition and plasma source configuration are discussed. Results indicate that optimizing gas-phase reactive nitrogen species production may be key in the design of plasma devices for disinfection.

59 BASIC BIOLOGICAL SCIENCES↗

Ionization wave propagation on a micro cavity plasma array

Microcavity plasma arrays of inverse pyramidal cavities fabricated on p-Si wafers act as localized dielectric barrier discharges. When operated at atmospheric pressure in argon and excited with high voltage at 10 kHz, a strong interaction between individual cavities is observed leading to wave-like optical emission propagating along the surface of the array. This phenomenon is numerically investigated. The computed ionization wave propagates with a speed of 5 km/s, which agrees well with experiments. The wave propagation is due to the sequential drift of electrons followed by drift of ions between cavities seeded by photoemission of electrons by the plasma in adjacent cavities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling of implantation and mixing damage during etching of SiO{sub 2} over Si in fluorocarbon plasmas

Energetic ion bombardment during plasma etching of microelectronics devices is necessary to activate chemical process and define features through the ions' anisotropic trajectories. These energetic fluxes can also cause damage and mixing of the constituents of crystalline lattices. These properties are likely best modeled using molecular dynamics (MD) simulations. The computational expense of these techniques makes feature scale simulations difficult, and so motivates development of approximate methods that can be used to model full features. In this regard, an implantation and mixing model has been developed and implemented into a Monte Carlo feature profile model to simulate the mixing and damage to the underlying Si during high aspect ratio (HAR) etching of SiO{sub 2} trenches. Fluxes to the surface were provided by a reactor scale model. The feature scale model was validated by comparison to the mixing produced by Ar{sup +} bombardment of Si with and without F and CF fluxes as predicted by MD simulations. Scaling of mixing damage of underlying Si during HAR of SiO{sub 2} etching in Ar/C{sub 4}F{sub 8}/O{sub 2} plasmas for rf bias powers of 1-4 kW was investigated. The authors found that mixing damage at the bottom of HAR features, though increasing in magnitude with increasing ion energy, does not scale as dramatically as on flat surfaces. This is due to the reflection of ions off of sidewalls which moderate the ion energies.

74 ATOMIC AND MOLECULAR PHYSICS↗

Experimental and modeling analysis of fast ionization wave discharge propagation in a rectangular geometry

Fast ionization wave (FIW), nanosecond pulse discharge propagation in nitrogen and helium in a rectangular geometry channel/waveguide is studied experimentally using calibrated capacitive probe measurements. The repetitive nanosecond pulse discharge in the channel was generated using a custom designed pulsed plasma generator (peak voltage 10-40 kV, pulse duration 30-100 ns, and voltage rise time {approx}1 kV/ns), generating a sequence of alternating polarity high-voltage pulses at a pulse repetition rate of 20 Hz. Both negative polarity and positive polarity ionization waves have been studied. Ionization wave speed, as well as time-resolved potential distributions and axial electric field distributions in the propagating discharge are inferred from the capacitive probe data. ICCD images show that at the present conditions the FIW discharge in helium is diffuse and volume-filling, while in nitrogen the discharge propagates along the walls of the channel. FIW discharge propagation has been analyzed numerically using quasi-one-dimensional and two-dimensional kinetic models in a hydrodynamic (drift-diffusion), local ionization approximation. The wave speed and the electric field distribution in the wave front predicted by the model are in good agreement with the experimental results. A self-similar analytic solution of the fast ionization wave propagation equations has also been obtained. The analytic model of the FIW discharge predicts key ionization wave parameters, such as wave speed, peak electric field in the front, potential difference across the wave, and electron density as functions of the waveform on the high voltage electrode, in good agreement with the numerical calculations and the experimental results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

450 mm dual frequency capacitively coupled plasma sources: Conventional, graded, and segmented electrodes

Wafer diameters for microelectronics fabrication will soon transition from 300 to 450 mm at a time when excitation frequencies for capacitively coupled plasmas (CCPs) are increasing to 200 MHz or higher. Already for 300 mm tools, there is evidence that wave behavior (i.e., propagation, constructive, and destructive interference) affects the uniformity of processing. The increase in diameter to 450 mm is likely to exacerbate these effects, perhaps requiring nontraditional tool designs. This is particularly important in dual frequency (DF) CCP tools in which there are potential interactions between frequencies. In this paper, results from a two-dimensional computational investigation of Ar plasma properties in a 450 mm DF-CCP reactor, incorporating a full-wave solution of Maxwell's equations, are discussed. As in 300 mm DF-CCP reactors, the electron density collapses toward the center of the reactor with increasing high frequency (HF), however, with more pronounced finite wavelength effects. Graded conductivity electrodes with multilayer of dielectrics are computationally demonstrated as a possible means to suppress wave effects thereby increasing plasma uniformity. Segmentation of the HF electrode also improves the plasma uniformity by making the electrical distance between the feeds and the sheath edges as uniform as possible.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High energy electron fluxes in dc-augmented capacitively coupled plasmas I. Fundamental characteristics

Power deposition from electrons in capacitively coupled plasmas (CCPs) has components from stochastic heating, Joule heating, and from the acceleration of secondary electrons through sheaths produced by ion, electron, or photon bombardment of electrodes. The sheath accelerated electrons can produce high energy beams which, in addition to producing excitation and ionization in the gas can penetrate through the plasma and be incident on the opposite electrode. In the use of CCPs for microelectronics fabrication, there may be an advantage to having these high energy electrons interact with the wafer. To control the energy and increase the flux of the high energy electrons, a dc bias can be externally imposed on the electrode opposite the wafer, thereby producing a dc-augmented CCP (dc-CCP). In this paper, the characteristics of dc-CCPs will be discussed using results from a computational study. We found that for a given rf bias power, beams of high energy electrons having a narrow angular spread (<1 deg. ) can be produced incident on the wafer. The maximum energy in the high energy electron flux scales as {epsilon}{sub max}=-V{sub dc}+V{sub rf}+V{sub rf0}, for a voltage on the dc electrode of V{sub dc}, rf voltage of V{sub rf}, and dc bias on the rf electrode of V{sub rf0}. The dc current from the biased electrode must return to ground through surfaces other than the rf electrode and so seeks out a ground plane, typically the side walls. If the side wall is coated with a poorly conducting polymer, the surface will charge to drive the dc current through.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High energy electron fluxes in dc-augmented capacitively coupled plasmas. II. Effects on twisting in high aspect ratio etching of dielectrics

In high aspect ratio (HAR) plasma etching of holes and trenches in dielectrics, sporadic twisting is often observed. Twisting is the randomly occurring divergence of a hole or trench from the vertical. Many causes have been proposed for twisting, one of which is stochastic charging. As feature sizes shrink, the fluxes of plasma particles, and ions in particular, into the feature become statistical. Randomly deposited charge by ions on the inside of a feature may be sufficient to produce lateral electric fields which divert incoming ions and initiate nonvertical etching or twisting. This is particularly problematic when etching with fluorocarbon gas mixtures where deposition of polymer in the feature may trap charge. dc-augmented capacitively coupled plasmas (dc-CCPs) have been investigated as a remedy for twisting. In these devices, high energy electron (HEE) beams having narrow angular spreads can be generated. HEEs incident onto the wafer which penetrate into HAR features can neutralize the positive charge and so reduce the incidence of twisting. In this paper, we report on results from a computational investigation of plasma etching of SiO{sub 2} in a dc-CCP using Ar/C{sub 4}F{sub 8}/O{sub 2} gas mixtures. We found that HEE beams incident onto the wafer are capable of penetrating into features and partially neutralizing positive charge buildup due to sporadic ion charging, thereby reducing the incidence of twisting. Increasing the rf bias power increases the HEE beam energy and flux with some indication of improvement of twisting, but there are also changes in the ion energy and fluxes, so this is not an unambiguous improvement. Increasing the dc bias voltage while keeping the rf bias voltage constant increases the maximum energy of the HEE and its flux while the ion characteristics remain nearly constant. For these conditions, the occurrence of twisting decreases with increasing HEE energy and flux.

36 MATERIALS SCIENCE↗

Mechanisms for plasma etching of HfO{sub 2} gate stacks with Si selectivity and photoresist trimming

To minimize leakage currents resulting from the thinning of the insulator in the gate stack of field effect transistors, high-dielectric constant (high-k) metal oxides, and HfO{sub 2} in particular, are being implemented as a replacement for SiO{sub 2}. To speed the rate of processing, it is desirable to etch the gate stack (e.g., metal gate, antireflection layers, and dielectric) in a single process while having selectivity to the underlying Si. Plasma etching using Ar/BCl{sub 3}/Cl{sub 2} mixtures effectively etches HfO{sub 2} while having good selectivity to Si. In this article, results from integrated reactor and feature scale modeling of gate-stack etching in Ar/BCl{sub 3}/Cl{sub 2} plasmas, preceded by photoresist trimming in Ar/O{sub 2} plasmas, are discussed. It was found that BCl{sub n} species react with HfO{sub 2}, which under ion impact, form volatile etch products such as B{sub m}OCl{sub n} and HfCl{sub n}. Selectivity to Si is achieved by creating Si-B bonding as a precursor to the deposition of a BCl{sub n} polymer which slows the etch rate relative to HfO{sub 2}. The low ion energies required to achieve this selectivity then challenge one to obtain highly anisotropic profiles in the metal gate portion of the stack. Validation was performed with data from literature. The effect of bias voltage and key reactant probabilities on etch rate, selectivity, and profile are discussed.

36 MATERIALS SCIENCE↗

Plasma atomic layer etching using conventional plasma equipment

The decrease in feature sizes in microelectronics fabrication will soon require plasma etching processes having atomic layer resolution. The basis of plasma atomic layer etching (PALE) is forming a layer of passivation that allows the underlying substrate material to be etched with lower activation energy than in the absence of the passivation. The subsequent removal of the passivation with carefully tailored activation energy then removes a single layer of the underlying material. If these goals are met, the process is self-limiting. A challenge of PALE is the high cost of specialized equipment and slow processing speed. In this work, results from a computational investigation of PALE will be discussed with the goal of demonstrating the potential of using conventional plasma etching equipment having acceptable processing speeds. Results will be discussed using inductively coupled and magnetically enhanced capacitively coupled plasmas in which nonsinusoidal waveforms are used to regulate ion energies to optimize the passivation and etch steps. This strategy may also enable the use of a single gas mixture, as opposed to changing gas mixtures between steps.

36 MATERIALS SCIENCE↗