Search NASA⌕ Search

Engineering topics

Kutler, P.

Publications and source records attributed to Kutler, P..

53 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Implicit finite-difference procedures for the computation of vortex wakes

Implicit finite-difference procedures for the primitive form of the incompressible Navier-Stokes and the compressible Euler equations are used to compute vortex wake flows. The partial differential equations in strong conservation-law form are transformed to cluster grid points in regions with large changes in vorticity. In addition to clustering, fourth-order accurate, spatial difference operators are used to help resolve the flow-field gradients. The use of implicit time-differencing permits large time steps to be taken since temporal variations are typically small. Computational efficiency is achieved by approximate factorization. Both two-dimensional and preliminary three-dimensional calculations are described and qualitatively compared with existing experimental data.

Steger, J. L.↗
NASA NTRS1976

Computation of the inviscid supersonic flow over an external axial corner

A second-order finite-difference procedure is used to evaluate the inviscid supersonic flowfield surrounding an external axial corner composed of swept planar compression surfaces and representing the inlets on existing high-speed aircraft. The governing partial differential equations in conservation-law form are hyperbolic with respect to the axial coordinate and are solved iteratively by means of MacCormack's algorithm. The procedure treats both the peripheral shock wave and vortical singularities as discontinuities. Numerical results are presented for two parametric studies regarding the effects on the flowfield of varying the free-stream Mach number and the leading edge sweep of the horizontal wedge. Results of parametric Mach number study agree with the Mach number independence principle in that as the Mach number increases, such characteristics as shock shape, cross-flow sonic line location, and vortical singularity position approach an asymptote.

Kutler, P.↗
NASA NTRS1975

Inviscid supersonic/hypersonic body flowfields and aerodynamics from shock-capturing technique calculations

A shock-capturing, finite-difference computational procedure has been used to predict the body flowfields over a wide range of initial conditions, and these results have been compared with wind tunnel data. Two different studies have been performed. In the first, details of the shock layer surrounding space shuttle orbiter configurations have been calculated. In the second, the aerodynamic forces and moments on a parametrically varied set of blunt biconic bodies of revolution have been evaluated for angles of attack up to 20 degrees and Mach numbers from 5 to 20.

Chaussee, D. S.↗
NASA NTRS1975

Numerical solutions for supersonic corner flow

Analytical solutions for inviscid supersonic corner flows are virtually nonexistent due to the complexity of the interference geometry. In view of this, numerical solutions for swept-compressive and swept-expansive corner flows are obtained. The governing equations are written in strong conservation-law form and are solved iteratively in nonorthogonal conical coordinates by use of a second-order, shock-capturing, finite-difference technique. The computed wave structure and surface pressure distributions are compared with high Reynolds number experimental data and show very good agreement. The results clearly show that supersonic corner flow at reasonably high Reynolds numbers including the effect of sweep is dominated by the inviscid field.

Shankar, V.↗
NASA NTRS1975

Three-dimensional, shock-on-shock interaction problem

The unsteady, three-dimensional flowfield resulting from the interaction of a plane shock with a cone-shaped vehicle traveling supersonically is determined, using a second-order, shock-capturing, finite-difference approach. The time-dependent, inviscid gasdynamic equations are transformed to include the self-similar property of the flow, to align various coordinate surfaces with known shock waves, and to cluster points in the vicinity of the intersection of the transmitted incident shock and the surface of the vehicle. The governing partial differential equations in conservation-law form are then solved iteratively using MacCormack's (1969) algorithm.

Kutler, P.↗
NASA NTRS1975

Internal and external axial corner flows

The inviscid, internal, and external axial corner flows generated by two intersecting wedges traveling supersonically are obtained by use of a second-order shock-capturing, finite-difference approach. The governing equations are solved iteratively in conical coordinates to yield the complicated wave structure of the internal corner and the simple peripheral shock of the external corner. The numerical results for the internal flows compare favorably with existing experimental data.

Kutler, P.↗
NASA NTRS1975

Computation of three-dimensional, inviscid supersonic flows

The paper sets forth in detail a method for the finite-difference computation of three-dimensional supersonic fields in an Eulerian mesh. First-, second-, and third-order finite difference schemes are examined. Attention is given to proper treatment of the impermeable and permeable boundaries encompassing the computational plane. Numerical results are presented for certain specific configurations: a conical wing-body combination, internal corner flow, a two-dimensional blunt body, an interfering shock problem, and three-dimensional inviscid supersonic flow past a shuttle-orbiter type vehicle.

Kutler, P.↗
NASA NTRS1974

On the shock-on-shock interaction problem

The unsteady, inviscid flowfield that results when a supersonic vehicle strikes a planar oblique shock wave, though difficult to simulate experimentally, is quite easy to model and compute numerically. The complicated flowfield, which contains multiple shock wave interactions, is determined using a second-order, shock-capturing, finite-difference approach which solves the time-dependent Euler equations under a self-similar transformation. A series of numerical results for a simple two-dimensional wedge is presented which describes the entire disturbed region, including the wave structure, and shows good agreement with the available two- and three-dimensional experimental data.-

Kutler, P.↗
NASA NTRS1973

Numerical solution for the inviscid supersonic flow in the corner formed by two intersecting wedges.

The inviscid, interference corner flow generated by two intersecting wedges immersed in a supersonic stream is obtained by use of a second-order, shock-capturing, finite-difference approach. The governing equations are solved iteratively in conical coordinates to yield the flow structure consisting of multiple shock and slip surfaces. The numerical results for shock wave and slip surface position and structure, pitot pressure traverses, and surface pressure distributions are compared with experimental data obtained over a wide range of Reynolds numbers. The comparisons show the best agreement with the high Reynolds number (greater than 3,000,000) results for which the boundary layer is turbulent.

Kutler, P.↗
NASA NTRS1972

Numerical computation of multishocked, three-dimensional supersonic flow fields with real gas effects.

A computational procedure is presented which is capable of determining the supersonic flow field surrounding three-dimensional wing-body configurations such as a delta-wing space shuttle. The governing equations in conservation-law form are solved by a finite difference method using a second-order noncentered algorithm between the body and the outermost shock wave, which is treated as a sharp discontinuity. Secondary shocks which form between these boundaries are captured automatically, and the intersection of these shocks with the bow shock posed no difficulty. Resulting flow fields about typical blunt nose shuttle-like configurations at angle of attack are presented. The differences between perfect and real gas effects for high Mach number flows are shown.

Kutler, P.↗
NASA NTRS1972

Application of shock capturing and characteristics methods to shuttle flow fields

The calculation of real gas flows around the space shuttle vehicle can be accomplished by the method of characteristics (MOC) or shock capture technique (SCT). Results obtained with these methods for an early orbiter shape proposed by the North American Rockwell Corporation and also for the more recent 040A configuration suggested by NASA-MSC are presented. Results obtained with the SCT code demonstrate its three-dimensional, multiple shock capturing capability while results obtained with the MOC code demonstrate the calculation of equilibrium real gas flows and the determination of flow variables required for a heating analysis.

Kutler, P.↗
NASA NTRS1972

Comparison of characteristics and shock capturing methods with application to the space shuttle vehicle.

A critical appraisal is presented of a method-of-characteristics (MOC) and a shock-capturing technique (SCT) for calculating three-dimensional supersonic flow. Detailed comparisons are made for pointed and blunt-nosed bodies with a thick delta wing at angles of attack from 5 to 15 deg. The results show excellent agreement between the methods and with experiment. It is established that the SCT code yields accurate shock locations and jump conditions. The SCT code typically requires about three times as many mesh points as the MOC code in order to resolve the bow shock, but the total computation time is about the same. On a point for point basis, the SCT code is about four times faster than the MOC code.

Rakich, J. V.↗
NASA NTRS1972

Computation of space shuttle flow fields using noncentered finite-difference schemes.

Second- and third-order, noncentered finite-difference schemes are described for the numerical solution of the hyperbolic equations of fluid dynamics. The advantages of noncentered methods over the more conventional centered schemes are: simpler programming logic, nonhomogeneous terms are easily included, and generalization to multidimensional problems is direct. Second- and third-order methods are compared with regard to dissipative and dispersive errors and shock-capturing ability. These schemes are then used in a shock-capturing technique to determine the inviscid, supersonic flow field surrounding space shuttle vehicles (SSV). Resulting flow fields about typical pointed and blunted, delta-winged SSVs at angle of attack are presented and compared with experiment.

Kutler, P.↗