Engineering topics

Kutzbach, K

Publications and source records attributed to Kutzbach, K.

4 records

NASA NTRS1923

The flexible mounting of an airplane engine

Discussed here is the suggested installation of the 'unbalanced' 8-cylinder VE-engine. The suggestion was that a flexible mounting be used instead of bolting the engine rigidly to the airplane structure. It was concluded that a flexible connection between the engine and the airplane is probably possible. A flexible connection primarily diminishes the vibrations due to inertia and, to a lesser degree, those due to torque variation. However, engines vibrate more when freely suspended than when rigidly mounted, and this vibration has a detrimental effect on all connections between the engine and the airplane. Therefore, in view of the relatively insignificant advantages which may be derived from the elastic suspension of the engine, the present rigid mounting is to be preferred. Vibration reduction can be achieved by incorporating in the fuselage as many of the rigid airplane parts as possible.

Kutzbach, K↗

NASA NTRS1923

Adaptation of aeronautical engines to high altitude flying

Issues and techniques relative to the adaptation of aircraft engines to high altitude flight are discussed. Covered here are the limits of engine output, modifications and characteristics of high altitude engines, the influence of air density on the proportions of fuel mixtures, methods of varying the proportions of fuel mixtures, the automatic prevention of fuel waste, and the design and application of air pressure regulators to high altitude flying. Summary: 1. Limits of engine output. 2. High altitude engines. 3. Influence of air density on proportions of mixture. 4. Methods of varying proportions of mixture. 5. Automatic prevention of fuel waste. 6. Design and application of air pressure regulators to high altitude flying.

Kutzbach, K↗

NASA NTRS1923

Results of experimental flights at high altitudes with Daimler, Benz and Maybach engines to determine mixture formation and heat utilization of fuel

The experimental flights described herein were made with the object of obtaining information regarding the following two questions, which as yet have not been sufficiently elucidated. These are: 1. What effect has altitude upon the formation of the mixture? 2. What alteration takes place, with increasing altitude, in the utilization of the heat contained in the fuel?.

Kutzbach, K↗

NASA NTRS1920

Experience with Geared Propeller Drives for Aviation Engines

I. The development of the gear wheels: (a) bending stresses; (b) compressive stresses; (c) heating; (d) precision of manufacture. II. General arrangement of the gearing. III. Vibration in the shaft transmission. An overview is given of experience with geared propeller drives for aviation engines. The development of gear wheels is discussed with emphasis upon bending stresses, compressive stresses, heating, and precision in manufacturing. With respect to the general arrangement of gear drives for airplanes, some principal rules of mechanical engineering that apply with special force are noted. The primary vibrations in the shaft transmission are discussed. With respect to vibration, various methods for computing vibration frequency and the influence of elastic couplings are discussed.

Kutzbach, K↗