Search NASA⌕ Search

Engineering topics

Kwon, Hyunguk

Publications and source records attributed to Kwon, Hyunguk.

12 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Temperature measurements in heavily-sooting ethylene/air flames using synchrotron x-ray fluorescence of krypton

High-fidelity temperature field measurements have been made for several heavily-sooting ethylene/air flames that have historically been challenging environments for conventional optical diagnostics. These challenges have largely been overcome here, in this study, by conducting x-ray fluorescence (XRF) measurements of a Kr fluorescent agent in the hard x-ray regime (15 keV). The current methodology presents a more economical diagnostic than a previously reported implementation of the Kr-XRF method, by limiting seeding of the expensive fluorescent agent to only the fuel stream flows. Detailed reacting flow simulations have been used to interpret experimental signals by tracking the mole fraction of the fluorescent agent in the flow field. Simulated Kr densities are in excellent agreement with measurements throughout the flow field. Temperature measurements of the flow field also agree well with simulations and recent literature studies. However, uncertainties in the measurements become increasingly large downstream of the burner surface as the krypton fraction drops due to mixing of the fuel and co-flow streams. Additionally, we demonstrate that soot particles in the heavily sooting flames studied do not impede the Kr-XRF measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

In situ temperature measurements in sooting methane/air flames using synchrotron x-ray fluorescence of seeded krypton atoms

Synchrotron x-ray fluorescence has been used to measure temperatures in optically dense gases where traditional methods would fail. These data provide a benchmark for stringent tests of computational fluid dynamics models for complex systems where physical and chemical processes are intimately linked. The experiments measured krypton number densities in a sooting, atmospheric pressure, nonpremixed coflow flame that is widely used in combustion research. The experiments not only form targets for the models, but the simulations also identify potential sources of uncertainties in the measurements, allowing for future improvements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Describing the Mechanism of Instability Suppression Using a Central Pilot Flame With Coupled Experiments and Simulations

Pilot flames are commonly used to extend combustor operability limits and suppress combustion oscillations in low-emissions gas turbines. Combustion oscillations, a coupling between heat release rate oscillations and combustor acoustics, can arise at the operability limits of low-emissions combustors where the flame is more susceptible to perturbations. While the use of pilot flames is common in land-based gas turbine combustors, the mechanism by which they suppress instability is still unclear. In this study, we consider the impact of a central jet pilot on the stability of a swirl-stabilized flame in a variable-length, single-nozzle combustor. Previously, the pilot flame was found to suppress the instability for a range of equivalence ratios and combustor lengths. We hypothesize that combustion oscillation suppression by the pilot occurs because the pilot provides hot gases to the vortex breakdown region of the flow that recirculate and improve the static, and hence dynamic, stability of the main flame. This hypothesis is based on a series of experimental results that show that pilot efficacy is a strong function of pilot equivalence ratio but not pilot flow rate, which would indicate that the temperature of the pilot products as well as the combustion intensity of the pilot flame play more of a role in oscillation stabilization than the length of the pilot flame relative to the main flame. Further, the pilot-flame efficacy increases with pilot-flame equivalence ratio until it matches the main-flame equivalence ratio; at pilot equivalence ratios greater than the main equivalence ratio, the pilot-flame efficacy does not change significantly with pilot equivalence ratio. To understand these results, we use large-eddy simulation (LES) to provide a detailed analysis of the flow in the region of the pilot flame and the transport of radical species in the region between the main flame and pilot flame. Furthermore, the simulation, using a flamelet/progress variable-based chemistry tabulation approach and standard eddy viscosity/diffusivity turbulence closure models, provides detailed information that is inaccessible through experimental measurements.

42 ENGINEERING↗
DOE OSTI2021

Pyrolysis of bio-derived dioxolane fuels: A ReaxFF molecular dynamics study

Alkyl-substituted 1,3-dioxolanes, including 4,5-dimethyl-2-pentan-3-yl-1,3-dioxolane (Fuel 1), 4,5-dimethyl-2-pentyl-1,3-dioxolane (Fuel 2), and 2-(heptan-3-yl)-4,5-dimethyl-1,3-dioxolane (Fuel 3), have been recently suggested as potential biodiesels. In this paper, we investigate the initial pyrolysis of the alkyl-substituted 1,3-dioxolanes at high temperatures using ReaxFF molecular dynamics (MD) simulations. We analyze the decomposition rate, reaction mechanism, and product distribution in the pyrolysis of the three alkyl 1,3-dioxlanes. The three fuels primarily decompose to 4,5-dimethyl-1,3-dioxolane radical and hydrocarbons derived from the alkyl side-chains. The further decomposition of 4,5-dimethyl-1,3-dioxolane radical primarily leads to 2-C 4 H 8 and CO 2 within a few decomposition steps. The hydrocarbon product distribution is significantly affected by the molecular structure of the alkyl side-chain, which would have a strong influence on the sooting tendency of these fuels. The ReaxFF simulations predict that the order of sooting tendency would be Fuel 3 > Fuel 1 > Fuel 2, which agrees with the measured sooting tendency trend. Based on the pyrolysis mechanism identified by ReaxFF, we propose a new alkyl dioxolane, 4-hexyl-5-methyl-1,3-dioxolane (Fuel 4), which might produce even less soot, by modifying the molecular structure of Fuel 2. Our ReaxFF simulation shows that Fuel 4 produce much less C 4 H 8 , an effective non-aromatic soot precursor, than Fuel 2. Moreover, more carbon atoms are bonded to each oxygen atom in Fuel 4 than Fuel 2, which would help reduce soot yield by removing more carbon atoms from the soot-producing pool of species. The major decomposition pathways identified in this work can be used to develop chemical kinetic models for 1,3-dioxolane based compounds, as biodiesel components, applicable to combustion engine simulations. We also demonstrate that the chemical kinetic insight offered by ReaxFF simulations can be used to design new fuel molecules with more desired properties.

09 BIOMASS FUELS↗
DOE OSTI2020

Effect of ammonia addition on suppressing soot formation in methane co-flow diffusion flames

Due to issues surrounding carbon dioxide emissions from carbon-containing fuels, there is growing interest in ammonia (NH 3 ) as an alternative combustion fuel. One attractive method of burning NH 3 is to co-fire it with hydrocarbons, such as natural gas, and in this case soot formation is possible. To begin understanding the influence of NH 3 on soot formation when co-fired with hydrocarbons, soot volume fractions and mole fractions of gas-phase species were computationally and experimentally interrogated for CH 4 flames with up to 40% NH 3 by volumetric fuel fraction. Mole fractions of gas-phase species, including C 2 H 2 and C 6 H 6 , were measured with on-line electron impact mass spectrometry, and soot volume fractions were obtained via color-ratio pyrometry. The simulations employed a detailed chemical mechanism developed for capturing nitrogen interactions with hydrocarbons during combustion. The results are compared to findings in N 2 -CH 4 flames, in order to separate thermal and dilution effects from the chemical influence of NH 3 on soot formation. Experimentally, C 2 H 2 concentrations were found to decrease slightly for the NH 3 -CH 4 flames relative to N 2 -CH 4 flames, and a stronger suppression of C 6 H 6 was found for NH 3 relative to N 2 additions. The measured results show a strong suppression of soot with the addition of NH 3 , with soot concentrations reduced by over a factor of 10 with addition of up to 20% or more NH 3 by mole fraction. The model satisfactorily captured relative differences in maximum centerline C 2 H 2 , C 6 H 6 , and soot concentrations with addition of N 2 , but was unable to match measured differences in NH 3 -CH 4 flames. Furthermore, these results highlight the need for an improved understanding of fuel-nitrogen interactions with higher hydrocarbons to enable accurate models for predicting particulate emissions from NH 3 /hydrocarbon combustion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

ReaxFF-based molecular dynamics study of bio-derived polycyclic alkanes as potential alternative jet fuels

This work investigates the initial stages of the pyrolysis of HtH-1 (C 18 H 32 ; 2,2,7,7,8a,8b-hexamethyl-dodecahydrobiphenylene) and HtH-2 (C 18 H 34 ; 1,1',3,3,3',3'-hexamethyl-1,1'-bi(cyclohexane)), which are bio-derived polycyclic alkanes and potential jet fuels, using ReaxFF force field based molecular dynamics (MD) simulations. Global Arrhenius parameters, such as activation energies and pre-exponential factors, are calculated and used to analyze the overall decomposition kinetics of the fuels. HtH-1 decomposes faster than HtH-2 at the same temperature and density conditions, and they have a faster decomposition rate compared to some existing jet-fuels, such as JP-10. A systematic reaction analysis framework developed in this work is applied to determine a temperature-dependent decomposition mechanism. At lower temperature, the central C-C bond connecting the two cyclohexane rings is dominantly broken in both HtH-1 and HtH-2. However, C-CH 3 bond breaking becomes dominant with increasing temperature due to the large increase in entropy during this reaction. Major products from HtH-1 are C 5 H 8 and C 4 H 8 , and those from HtH-2 are C 4 H 8 and C 2 H 4 . The major products predict that HtH-1 has a higher sooting tendency than HtH-2, which is consistent with measurements. The impact of HtH-2 on the pyrolysis of HtH-1 is also investigated in their binary mixtures. HtH-1 and HtH-2 decompose by unimolecular reactions, and they rarely interact with each other during the pyrolysis of the mixtures. Furthermore, this work demonstrates that ReaxFF can be used to investigate pyrolysis and combustion chemistry of existing or future fuels and to contribute to the development of their chemical kinetic models without any a priori input and chemical intuition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Sooting tendencies of 20 bio-derived fuels for advanced spark-ignition engines

The sooting tendencies of 20 bio-derived fuels indicated as potential blendstocks for spark-ignition engines by the Co-Optimization of Fuels & Engines (Co-Optima) Initiative are studied. The Yield Sooting Index (YSI) is used to quantify the sooting tendencies. The Co-Optima Chemical Model is used to predict the numerical YSIs for all test fuels, and these results are compared with measurements. Experimental YSIs are newly measured for 2 furans and are taken from our previous work for the other compounds. Overall, the predicted YSIs agree well with measurements, within the experimental uncertainties, except for 2,5-dimethylfuran (2,5-DMF). It is found that Polycyclic Aromatic Hydrocarbons (PAH) growth reactions have little influence on the relative soot production from each fuel and therefore on YSI predictions. A modified sensitivity coefficient formulation is proposed to evaluate reaction sensitivities specifically for YSI. This formulation is applied to the 2,5-DMF-doped flame, and six 2,5-DMF initial decomposition reactions, which lead to different major soot precursors, are identified as the most sensitive reactions. The impact of the chemical kinetic uncertainties embedded in these reactions is quantified by randomly perturbing their reaction rates within a factor of two. The resulting prediction uncertainty in the 2,5-DMF-doped flame is found to be ± 8 YSI units (±11%), which demonstrates that the test-fuel-specific decomposition reactions indeed have considerable influence on its YSI prediction. Our research suggests that more accurate kinetic parameters for fuel initial decomposition reactions can potentially improve YSI predictions effectively, without altering the YSI predictions of other fuels with significantly different molecular structures.

09 BIOMASS FUELS↗
DOE OSTI2020

Reactive Molecular Dynamics Simulations and Quantum Chemistry Calculations To Investigate Soot-Relevant Reaction Pathways for Hexylamine Isomers

Sooting tendencies of a series of nitrogen-containing hydrocarbons (NHCs) have been recently characterized experimentally using the yield sooting index (YSI) methodology. This work aims to identify soot-relevant reaction pathways for three selected C6H15N amines, namely, dipropylamine (DPA), diisopropylamine (DIPA), and 3,3-dimethylbutylamine (DMBA) using ReaxFF molecular dynamics (MD) simulations and quantum mechanical (QM) calculations and to interpret the experimentally observed trends. ReaxFF MD simulations are performed to determine the important intermediate species and radicals involved in the fuel decomposition and soot formation processes. QM calculations are employed to extensively search for chemical reactions involving these species and radicals based on the ReaxFF MD results and also to quantitatively characterize the potential energy surfaces. Specifically, ReaxFF simulations are carried out in the NVT ensemble at 1400, 1600, and 1800 K, where soot has been identified to form in the YSI experiment. These simulations account for the interactions among test fuel molecules and pre-existing radicals and intermediate species generated from rich methane combustion, using a recently proposed simulation framework. ReaxFF simulations predict that the reactivity of the amines decrease in the order DIPA > DPA > DMBA, independent of temperature. Both QM calculations and ReaxFF simulations predict that C2H4, C3H6, and C4H8 are the main nonaromatic soot precursors formed during the decomposition of DPA, DIPA, and DMBA, respectively, and the associated reaction pathways are identified for each amine. Both theoretical methods predict that sooting tendency increases in the order DPA, DIPA, and DMBA, consistent with the experimentally measured trend in YSI. This work demonstrates that sooting tendencies and soot-relevant reaction pathways of fuels with unknown chemical kinetics can be identified efficiently through combined ReaxFF and QM simulations. Overall, predictions from ReaxFF simulations and QM calculations are consistent, in terms of fuel reactivity, major intermediates, and major nonaromatic soot precursors.

fuel decomposition↗
DOE OSTI2020

Chemical influence of ammonia on suppressing soot formation pathways

There is interest in mixing ammonia (NH3) with hydrocarbons, as this decreases overall CO2 emissions from the fuel mixture when burned. Co-firing NH3 with hydrocarbons like methane (CH4) also enables stable combustion over a larger set of operating conditions in engines and gas turbines than firing only NH3 permits. When NH3 is co-fired with hydrocarbons, the influence of NH3 on soot formation chemistry becomes relevant. In this work, soot concentrations in laminar nonpremixed co-flow flames of NH3/CH4 and N2/CH4 were analyzed using color-ratio pyrometry. The concentrations of combustion species (CH4, CO2, H2O, O2, C2H2, C6H6, HCN) across the different flames were also determined using on-line electron-impact mass spectrometry. The flames were also interrogated with 2D CFD simulations, which employ a detailed chemical mechanism tailored to capturing fuel-nitrogen chemistry. Addition of NH3 to CH4 flames was found to decrease soot concentrations more significantly than N2-addition (Fig. 1). The NH3/CH4 flames were found to have higher flame temperatures than the N2/CH4 flames, implying the suppression of soot afforded by NH3 is due to a chemical influence of NH3, as opposed to thermal or dilution effects. Based on experimental and simulated soot volume fractions and species concentrations, soot formation pathways affected by NH3 are postulated.

10 SYNTHETIC FUELS↗
DOE OSTI2020

A numerical study on the sooting tendencies of bio-derived fuels for spark-ignition engines

While more efficient vehicles have been developed over the decades, their performance is limited by the properties of existing fuels. In response, the Co-Optimization of Fuels and Engines Initiative (Co-Optima) under the U.S. Department of Energy (DOE) has developed a rigorous screening approach to identify the most promising biomass-derived blendstocks that are suitable for advanced spark-ignition (SI) engines. A detailed kinetic model has also been developed to predict the combustion properties of the selected blendstocks. This kinetic model has been designed mainly targeting ignition and flame propagation properties, and it has not previously been validated for soot formation. In this work, we numerically predicted the sooting tendency of 20 Co-Optima SI blendstocks using the Co-Optima kinetic model. The sooting tendencies are determined quantitatively using the Yield Sooting Index (YSI) methodology. As shown in Fig. 1, the predicted YSIs show good agreement with measurements, except for 2,5-dimethylfuran. We also quantify the sensitivity of the YSI predictions to aromatic growth reactions and fuel decomposition reactions of the test fuels. It is found that PAH growth reactions have little impact on YSIs for all 20 fuels under investigation. On the other hand, fuel decomposition reactions have a significant influence on the YSI of 2,5-dimethylfuran. Perturbing their reaction rates by a factor of two is shown to lead to 11 % YSI prediction uncertainty.

09 BIOMASS FUELS↗
DOE OSTI2020

Experimental and theoretical study of the soot-forming tendencies of furans as potential biofuels

Sustainably-produced biofuels, including furans derived from lignocellulosic biomass, are being studied as potential next-generation fuels. Biofuels have unique structures that are absent in conventional fuels and they potentially emit fewer particulates than conventional fuels because of the presence of oxygen atoms. In this work, we focus on quantification and measurement of sooting tendency. A set of furans was selected and their sooting tendencies were characterized by Yield Sooting Index (YSI), which was obtained by measuring the line-of-sight spectral radiance (LSSR) of a coflow laminar diffusion flame doped with 1000 ppm of each test fuel. The measured YSIs are lower than traditional gasoline fuels and benzenoid aromatics (e.g., YSIbenzene = 100). We also performed numerical simulations with a detailed chemical kinetic mechanism to analyze the flame chemistry of 2-methylfuran (2MF). 4→5 H-atom migration in the furan ring causes 31.0% of the total decomposition and is the dominant fuel consumption pathway leading to soot. DFT calculations via the G4 composite method were carried out to obtain activation energies (Ea) and bond dissociation energies (BDE). The results showed that the 4→5 H-atom migration in the furan ring has the second lowest Ea and subsequently forms a 1,2-diene-substituted ketone derivative as a stable species. The ring-opening products of the 4→5 H-atom migration are propyne + a linear ketene for 2-n-alkylfurans, and 1-butyne + a methyl-substituted ketene for 2-t-butylfuran. These results can explain the trends of the measured YSIs of 2-alkylfurans.

09 BIOMASS FUELS↗