Search NASA⌕ Search

Engineering topics

Kyriakidou, Eleni A.

Publications and source records attributed to Kyriakidou, Eleni A..

16 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Condition-dependent NO x adsorption/desorption over Pd/BEA: A combined microreactor and in situ DRIFTS study

Pd/BEA is chosen as a model passive NO x adsorber (PNA) to elucidate the effect of the feed gas composition on the NO x adsorption/desorption behavior. The Brønsted acid and the partially hydrolyzed framework Al (P-HAl(OH)) sites in HBEA adsorb NO and NO 2 under dry conditions. Moreover, the performance of HBEA is not affected by CO, while CO inhibits nitrate formation and promotes NO adsorption via the Pd(NO)(CO) complexes formation over Pd/BEA. H 2 O inhibits NO adsorption over the Brønsted acid and P-HAl(OH) sites, and ionic Pd is the only active site for NO x adsorption under wet conditions. Furthermore, NO adsorption over hydrated Pd (Pd 2+ (OH)(NO)(H 2 O) 3 ) is weaker than NO adsorption over bare ionic Pd (Z 2 [Pd 2+ (NO)], Z[Pd 2+ (OH)(NO)]). Dehydration of Pd 2+ (OH)(NO)(H 2 O) 3 forms more stable Z[Pd 2+ (OH)(NO)] during desorption. Here, the NO adsorption capacity of Pd/BEA improves in the presence of CO under both dry and wet conditions by forming a stable carbonyl–nitrosyl complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Designing ultrastable Pt/CeO 2 -Al 2 O 3 nanosheet catalysts for three-way catalysts applications

Designing Rh-free, especially Pt-only, three-way catalysts with improved low-temperature activity/stability is highly desirable. Herein, we demonstrate that ultrastable Pt/CeO 2 -Al 2 O 3 nanosheet catalysts can be obtained based on a Sabatier principle of metal-support interaction. Tuning the surface coverage of penta-site rich γ-Al 2 O 3 nanosheets (AlNS, weak adhesion to Pt) by CeO 2 “nano-islands” (strong adhesion to Pt) can lead to the synthesis of Pt/60 wt.%CeO 2 -AlNS that have lower light-off temperatures for CO, hydrocarbons, and NO compared to conventional Pt/CeO 2 and Pt/Al 2 O 3 catalysts by 100–200°C and a similar performance with the state-of-the-art Rh-based catalyst. Further, incorporating CeO 2 on the surface of AlNS can retard the sintering of CeO 2 during harsh redox hydrothermal aging, associate with the strong interaction between CeO 2 “nano-island” and penta-site rich γ-Al 2 O 3 nanosheets. Moreover, the improved activity/stability of Pt/CeO 2 -AlNS catalysts can be attributed to tuning of the Pt detachment and migration from and back to the CeO 2 “nano-islands”, respectively, that keeps Pt as nanoclusters on CeO 2 , the most active species for three-way catalyst applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Biphasic Janus Particles Explain Self-Healing in Pt–Pd Diesel Oxidation Catalysts

The addition of Pd to Pt-based diesel oxidation catalysts is known to enhance performance and restrict the anomalous growth of Pt nanoparticles when subjected to aging at high temperatures in oxidative environments. To gain a mechanistic understanding, we studied the transport of the mobile Pt and Pd species to the vapor phase, since vapor phase transport is the primary route for sintering in these catalysts. The results are surprising: there is a 30-fold drop in the effective vapor pressure of Pt in the Pt-Pd catalysts compared to monometallic Pt. At the same time, there is a significant enhancement in the vapor pressure of Pd, compared to PdO, which otherwise has a negligible vapor pressure at the aging temperature. Such behavior cannot be explained simply by alloying Pt and Pd in the metallic phase, or a core-shell morphology where a PdO shell covers a Pt core. Transmission electron microscopic examination of catalysts aged up to 50 h in air at 800 °C shows that the particles exhibit a biphasic “Janus”-like structure. The metal and oxide phases are conjoined, exposing a metal and an oxide face to the gas phase. The high mobility of the Pt and Pd allows them to be partitioned into the metal and oxide phases, in apparent thermodynamic equilibrium. The PdO helps to trap mobile PtO2 and as a result contains high concentrations of Pt oxide, consistent with its role in mitigating the transport of Pt to the vapor phase and preventing the growth of anomalously large particles. In turn, Pt allows Pd to remain metallic, allowing the catalyst to retain both metal and oxide functionality for catalysis. The regeneration of deactivated catalysts typically requires an external input, such as a change in the working environment from reducing to oxidizing or vice-versa. Here, we show that the mobile species, which are primary contributors to catalyst sintering are effectively returned to the active site, hence our use of the term “selfhealing”. The detailed insights into the inner workings of the Pt-Pd diesel oxidation catalysts can help provide clues to the design of robust and durable heterogeneous catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ni/CeO 2 Nanocatalysts with Optimized CeO 2 Support Morphologies for CH 4 Oxidation

Catalytic oxidation of CH 4 over nonprecious Ni/CeO 2 catalysts has attracted wide attention. Controlling the morphology of a CeO 2 support can enhance the CH 4 oxidation activity without changing the catalyst composition. Here, in this paper, a series of 2 wt % Ni/CeO 2 nanocatalysts with different CeO 2 support morphologies (nanoparticles (P), rods (R), cubes (C)) and synthetic procedures (precipitation, sol-gel (SG)) were evaluated for their CH 4 oxidation performance. The redox properties of CeO 2 supports and corresponding Ni loaded catalysts were characterized by H 2 -temperature-programmed reduction and oxygen storage capacity (OSC) measurements. The relationship among the CeO 2 morphologies, surface areas, redox properties, and CH4 oxidation activity for both CeO 2 supports and Ni/CeO 2 catalysts was established. The findings suggest that CeO 2 -R has a greater amount of surface oxygen vacancies as well as an improved OSC and CH4 oxidation activity compared to CeO 2 -P and CeO 2 -C supports. The same CH 4 oxidation activity pattern was observed for the Ni containing catalysts (Ni/CeO 2 -R > Ni/CeO 2 -P > Ni/CeO 2 -C). Increasing the CeO 2 surface area by using a sol-gel synthesis method (CeO 2 -SG) improved the amount of surface oxygen vacancies and CH 4 oxidation performance of CeO 2 -SG and Ni/CeO 2 -SG compared to CeO 2 -R and Ni/CeO 2 -R, respectively. Finally, all studied Ni/CeO 2 nanocatalysts showed improved hydrothermal stability compared to conventional Pd/Al 2 O 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Enhanced low temperature performance of bimetallic Pd/Pt/SiO 2 (core)@Zr(shell) diesel oxidation catalysts

Here, in this study, the diesel oxidation performance of degreened (DG) and hydrothermally aged monometallic and bimetallic Pd/Pt/SiO 2 (core)@Zr(shell) catalysts with varying Pd/Pt molar ratios from 3/1–1/3 was evaluated. Pd/Pt(3/1)/SiO 2 @Zr (DG) achieved 50% and 90% conversion of CO at 166 °C (T 50 ), 169 °C (T 90 ) and total hydrocarbons (THCs) at 198 °C (T 50 ), 244 °C (T 90 ). Decreasing the Pd/Pt molar ratio led to a decrease in the T 50,90 ’s, with Pd/Pt(1/3)/SiO 2 @Zr (DG) achieving T 50,90 ’s at 153, 156 °C for CO and 171, 200 °C for THCs, respectively. Moreover, Pd/Pt(1/3)/SiO 2 @Zr showed enhanced hydrothermal stability. XRD and TEM showed that in the hydrothermally aged bimetallic catalysts, the fraction of Pd present as a Pt-Pd metallic alloy increased with Pt content. The enhanced low temperature performance of Pd/Pt(1/3)/SiO 2 @Zr compared to the other studied catalysts was attributed to Pd being primarily present in metallic form, despite being subjected to severe oxidizing conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Hydrogen generation via ammonia decomposition on highly efficient and stable Ru-free catalysts: approaching complete conversion at 450 °C

We report Hydrogen (H 2 ) is a prospective zero-carbon and high-energy-density fuel alternative to fossil fuels for generating power and clean energy. Ammonia (NH 3 ) is a promising H 2 (17.7%) carrier, which can easily overcome the challenges associated with H 2 storage and transportation. Thermocatalytic ammonia decomposition reaction (ADR) is an effective way to produce clean H 2 but it relies on the use of expensive and rare ruthenium (Ru)-based catalysts at elevated temperatures (>500 °C), hence is not sustainable and economically feasible. Herein, we report a synergistic strategy to design a heterostructured Ru-free catalyst, consisting of CoNi alloy nanoparticles well-dispersed on a MgO–CeO 2 –SrO mixed oxide support with potassium promotion. The resulting K–CoNi alloy –MgO–CeO 2 –SrO catalyst presents 97.7% and 87.5% NH 3 conversion efficiency at 450 °C at gas hourly space velocities (GHSVs) of 6000- and 12 000-mL h -1 g cat -1 , respectively. At 500 °C, the H 2 production rate (57.75 mmol g cat -1 min -1 ) becomes comparable to that of most of the reported Ru-based catalysts. The catalyst stability has been successfully demonstrated in both a fixed-bed reactor under high pressure (120 h at 5.0 bar) and a membrane reactor prototype (600 h at 1.5 bar) at 500 °C. High-temperature in situ XPS analysis, temperature-programmed desorption/reduction, and density functional theory calculations have been carried out to elucidate the possible active sites and performance enhancement mechanisms. This work highlights the importance of constructing optimal interfaces between active metal nanoparticles and oxide support for boosting the NH 3 to H 2 conversion efficiency and long-term stability.

25 ENERGY STORAGE↗
DOE OSTI2022

A General Route to Flame Aerosol Synthesis and In Situ Functionalization of Mesoporous Silica

Abstract Mesoporous silica is a versatile material for energy, environmental, and medical applications. Here, for the first time, we report a flame aerosol synthesis method for a class of mesoporous silica with hollow structure and specific surface area exceeding 1000 m 2 g −1 . We show its superior performance in water purification, as a drug carrier, and in thermal insulation. Moreover, we propose a general route to produce mesoporous nanoshell‐supported nanocatalysts by in situ decoration with active nanoclusters, including noble metal (Pt/SiO 2 ), transition metal (Ni/SiO 2 ), metal oxide (CrO 3 /SiO 2 ), and alumina support (Co/Al 2 O 3 ). As a prototypical application, we perform dry reforming of methane using Ni/SiO 2 , achieving constant 97 % CH 4 and CO 2 conversions for more than 200 hours, dramatically outperforming an MCM‐41 supported Ni catalyst. This work provides a scalable strategy to produce mesoporous nanoshells and proposes an in situ functionalization mechanism to design and produce flexible catalysts for many reactions.

Liu, Shuo↗
DOE OSTI2022

A General Route to Flame Aerosol Synthesis and In Situ Functionalization of Mesoporous Silica

Mesoporous silica is a versatile material for energy, environmental, and medical applications. In this work, for the first time, we report a flame aerosol synthesis method for a class of mesoporous silica with hollow structure and specific surface area exceeding 1000 m 2 /g -1 . We show its superior performance in water purification, drug carrier, and thermal insulation. Moreover, we propose a general route to produce mesoporous nanoshell supported nanocatalysts by in situ decorating active nanoclusters, including noble metal (Pt/SiO 2 ), transition metal (Ni/SiO 2 ), metal oxide (CrO 3 /SiO 2 ), and alumina support (Co/Al 2 O 3 ). As a prototypical application, we perform dry reforming of methane using Ni/SiO 2 , achieving constant 97% CH 4 and CO 2 conversions for more than 200 hours, dramatically outperforming MCM-41 supported Ni catalyst. This work provides a scalable strategy to produce mesoporous nanoshells and proposes an in situ functionalization mechanism to flexible catalysts design for many reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Non-catalytic gas phase NO oxidation in the presence of decane

In this study, experiments without a catalyst revealed that NO was oxidized in a diesel exhaust gas phase mixture due to the presence of n -C 10 H 22 (decane). This reaction was observed to occur following the low temperature oxidation catalyst test protocol (LTC-D) defined by U.S. DRIVE. The purpose of LTC-D conditions is to simulate an aftertreatment diesel combustion gas mixture in order to test candidate catalyst materials. 100% NO conversion was observed, without a catalyst, after beginning to react at 330 °C accompanied by consumption of decane. After experiments that isolated hydrocarbons, ethylene was also observed to facilitate NO oxidation to a lesser degree (>470 °C). Density functional theory (DFT) calculations were conducted to investigate thermodynamically-possible initiating elementary steps during n -C 10 H 22 consumption and NO oxidation. Two feasible intermediate radicals to oxidize NO to NO 2 are ·C 10 H 21 O 2 and ·HO

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Mechanistic Understanding of Methane Combustion over Ni/CeO 2 : A Combined Experimental and Theoretical Approach

Catalytic oxidation of methane (CH 4 ) over nonprecious Ni/CeO 2 catalysts has received a lot of attention due to the large natural gas reserves found in North America and the prohibitive cost of palladium-based catalysts, commonly used for CH 4 oxidation. However, the catalytic mechanism of CH 4 oxidation over Ni/CeO 2 still remains unclear. Moreover, the parameters affecting the reaction rates, the interaction between nickel and CeO 2 , and the reaction intermediates are still not well understood. In this study, kinetic model fitting, CH 4 temperature-programmed reduction-mass spectroscopy (CH 4 TPR-MS), in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and density functional theory (DFT) calculations were combined to elucidate the mechanism of complete oxidation of CH 4 over Ni/CeO 2 . CH 4 TPR-MS showed that the complete oxidation of CH 4 over Ni/CeO 2 requires 55–120 °C lower compared to bare CeO 2 or Ni/quartz sand; complete oxidation of CH 4 took place when the surface oxygen species were abundant, while partial oxidation products (CO, H 2 ) were formed when the oxygen species were depleted. In situ DRIFTS showed that CH 3 , CH 2 , CO, and CO 2 were formed after CH 4 activation over Ni/CeO 2 , while CH 3 O species were not observed. Combining those findings with kinetic model fitting, a redox Mars–van Krevelen (MvK) mechanism showed the best description of the experimental observations. The MvK mechanism involves the reaction of dissociated oxygen species with gas-phase CH 4 while water inhibits the reaction rate by adsorbing on the oxidized sites. Moreover, CH 4 activation leads to the reduction of the active sites and oxygen vacancy formation followed by reoxidation of the active sites by gas-phase O 2 . A CH 4 oxidation reaction pathway over Ni/CeO 2 is proposed by DFT calculations. In summary, the findings shown here suggest that CH 4 oxidation over Ni/CeO 2 follows a redox MvK mechanism and provides guidance for the rational design of non-precious-metal catalysts for CH 4 oxidation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Hydrothermally stable Pd/SiO 2 @Zr Core@Shell catalysts for diesel oxidation applications

Hydrothermally stable diesel oxidation catalysts (DOCs) with improved low-temperature activity are desired for the abatement of emissions from diesel vehicles. Herein, novel palladium(Pd)/SiO 2 (core)@Zr(shell) structured DOCs were developed. SiO 2 was completely covered by an 8.4 nm thickness Zr-based shell using a hard template method. The SiO 2 @Zr support was decorated by Pd and evaluated under a simulated diesel exhaust stream. Degreened 1 wt% Pd/SiO 2 @Zr achieved 90% CO and total hydrocarbon conversion at 178 and 372 °C, respectively (feed: 6% CO 2 , 12% O 2 , 6% H 2 O, 400 ppm H 2 , 2000 ppm CO, 100 ppm NO, 1667 ppm C 2 H 4 , 1000 ppm C 3 H 6 , 333 ppm C 3 H 8 ; HCs in C 1 basis and GHSV = 113,000 h –1 ). After hydrothermal aging, only a minor deactivation was observed, while the surface area of 1 wt% Pd/SiO 2 @Zr was as high as 104 m 2 /g. The hydrothermal stability of 1 wt% Pd/SiO 2 @Zr was attributed to the poor crystallinity of SiO 2 @Zr, possibly due to the formation of Si-O-Zr bonds. Lastly, this work highlights the promising potential of utilizing durable Pd/SiO 2 @Zr catalysts for diesel oxidation applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Boron-hyperdoped silicon for the selective oxidative dehydrogenation of propane to propylene

Boron containing catalysts have great potential in the oxidative dehydrogenation of propane. Herein, a series of 15, 25 and 42 at% boron-hyperdoped silicon catalysts synthesized by laser pyrolysis was studied. Here, boron-hyperdoped silicon samples showed >6 times higher propylene productivity than commercial h-BN at 450 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A comparative study of silver- and palladium-exchanged zeolites in propylene and nitrogen oxide adsorption and desorption for cold-start applications

Here, silver and palladium ion-exchanged BEA zeolites (Si/Al = 12.5) and silver ion-exchanged ZSM-5 zeolites (Si/Al = 15) were studied for their ability to adsorb and desorb propylene and NO under simulated diesel exhaust conditions. The adsorption experiment results demonstrated the excellent ability of bare BEA zeolites to adsorb propylene, but only a small amount of NO. The presence of H 2 O inhibited the adsorption of both C 3 H 6 and NO. Ion-exchanging BEA zeolites with Ag (1.2 and 5.1 wt.% Ag/BEA) attenuated the inhibiting effect of H 2 O on C 3 H 6 adsorption, while NO storage remained inhibited. Adsorption experiments indicated that C 3 H 6 and NO competed with each other for Pd sites with C 3 H 6 showing stronger adsorption compared to NO, whereas Ag sites preferentially adsorbed C 3 H 6 . DRIFTS data indicated the formation of nitrate, formate and acetate species on Ag and Pd, while C 3 H 6 and NO adsorption was also observed on the zeolite hydroxyl groups in the absence of H 2 O. However, the C 3 H 6 and NO adsorption on the zeolite hydroxyl groups was significantly inhibited in the presence of H 2 O. Additionally, nitrosyl, acrolein and carbonate species were formed over 1.0 wt.% Pd/BEA. The effluent analysis during the temperature-programmed desorption in the DRIFTS reactor revealed that adsorbed C 3 H 6 and NO reacted during the release to form oxidation reaction byproducts. The 1.0 wt.% Pd/BEA zeolite showed the greatest oxidation ability during desorption with the majority of stored C 3 H 6 converted to CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Activating low-temperature diesel oxidation by single-atom Pt on TiO 2 nanowire array

Supported metal single atom catalysts (SACs) present an emerging class of low-temperature catalysts with high reactivity and selectivity, which, however, face challenges on both durability and practicality. Herein, we report a single-atom Pt catalyst that is strongly anchored on a robust nanowire forest of mesoporous rutile titania grown on the channeled walls of full-size cordierite honeycombs. This Pt SAC exhibits remarkable activity for oxidation of CO and hydrocarbons with 90% conversion at temperatures as low as ~160 °C under simulated diesel exhaust conditions while using 5 times less Pt-group metals than a commercial oxidation catalyst. Such an excellent low-temperature performance is sustained over hydrothermal aging and sulfation as a result of highly dispersed and isolated active single Pt ions bonded at the Ti vacancy sites with 5 or 6 oxygen ions on titania nanowire surfaces.

36 MATERIALS SCIENCE↗