Search NASA⌕ Search

Engineering topics

L P Keller

Publications and source records attributed to L P Keller.

33 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Unraveling Solar Wind Space Weathering of Carbon-Rich Asterods: Low-Flux VS. High-Flux Ion Irradiation of Murchison

Introduction: Space weathering processesalter the microstructural, compositional, and optical properties of airless planetary surfaces.Solar wind space weatheringforms ion-damaged rims within the outermost ~100 nm of regolith grains through atomic-displacements and implantation of energetic H+and He+ions[1]. Transmission electron microscope(TEM)studies of space weathered Itokawa and lunar olivine particles reveal predominantly nanocrystalline solar wind-damaged rims with only minor regions of amorphization[2-5]. This finding differs from laboratoryion irradiation experiments in which samples become amorphous at fluences 2-3 orders of magnitude lower than the independentlyconstrained fluences for still-crystalline natural samples [6-7].Ion flux is generally considered to have a secondaryeffectcompared to fluence in these irradiation experiments. However, solar wind irradiation of natural samples occurs at a flux that is ~4-5 orders of magnitude lower than whatisused inlaboratory simulations (e.g., [6,8-9]). Constraining how the very low ion flux of solar wind influences the microstructural, chemical, and spectral alteration of silicate minerals will improve our understanding of solar wind space weathering and aid in the analysis of returned samples from the Hayabusa2 and OSIRIS-REx missions. Here we report results from low-and high-flux ion irradiation experiments on the Murchison (CM2)meteoritewithcomparable total fluences. Methods: We performed low-flux and high-flux He+(4 keV) and H+(1 keV) irradiation experiments on separate, dry-cut Murchison slabs. Low-flux He+irradiation reached a total fluence of 2.1 x 1016ions/cm2(~400 years of exposure at Bennu) using a flux of 3.6 x 1011ions/cm2/s; low-flux H+irradiation reached a total fluence of 3.9 x 1016ions/cm2(~30 years) using a flux of 6.6 x 1011ions/cm2/s. High-flux He+irradiation reached a total fluence of 2.0 x 1016ions/cm2(~400 years)using a flux of 9.1 x 1012ions/cm2/s; high-flux H+irradiation reached a total fluence of 5.8 x 1016ions/cm2(~50 years)using flux of 8.4 x 1012ions/cm2/s. By irradiating to similar total fluences in both the low-flux and high-flux experiments, we can better isolate and evaluatethe effects of ion flux. Differences between unirradiatedand irradiated surfaces are determined using threeanalytical techniques:(1) in situX-ray photoelectron spectroscopy(XPS) reveals changes in surface chemistry,(2) visible to near-infrared spectroscopy (VNIR; 0.35-2.5 μm) highlights changes in spectraltrends, such as albedo and slope, and (3) TEM and energy-dispersive X-ray spectroscopy (EDS) identifieschanges in nanoscale structure and elemental composition within olivine and matrix electron-transparent thin sections prepared using focused ion beam scanning electron microscopy (FIB-SEM). Results and Discussion: XPS analyses of the low-fluxand high-fluxHe+-and H+-irradiated samples showa minorreduction in surface carbon contentand chemicalreduction ofFe3+to Fe2+. The latter result is consistent with the higher Fe2+/Fe3+ratios observed in phyllosilicate-rich space weathered rims of Ryugu grains [10].VNIR analyses suggest that the low-flux H+-irradiated spectrum has a slightly bluer slope (over 0.65-2.5 μm) compared to the unirradiated VNIR spectrum from [9] while the low-flux He+-irradiated spectral slope is comparable to the unirradiated surface. Both the high-flux He+-and H+-irradiated VNIR spectra exhibitslightlyhigheralbedos at shorter wavelengths relativeto their unirradiated counterparts, with He+irradiation yielding a greater change. Thus far, the low-flux He+-irradiated matrix and olivine FIBsections as well as the low-flux H+-irradiated olivine FIBsection have been examined with TEM. The surfaces of all three samplesshowless vesiculation than high-flux/high-fluenceirradiated matrix and olivine samples from [9]. The depth of phyllosilicate amorphization in thelow-fluxHe+-irradiated matrix FIBsection varieslaterally, with crystalline domains occurring as shallow as ~25 nm in some regions. Thelow-flux He+-irradiated olivine FIBsection has acontinuous,~40-90 nm thick ion-affected layer with polycrystalline and amorphous microstructures. The low-flux H+-irradiated olivine sampleexhibits a distinct, ~10-40 nm ion-affected layer whose uppermost ~20 nmin thicker regions is predominantly amorphous.Continuing to compare results from this work to those from [9] will provide a comprehensive understanding of how ion flux impacts the microstructural, chemical, and optical modification of various mineral phases and, in turn,help identify space weathering features from parent body alteration in Hayabusa2 and OSIRIS-REx returned samples.

D L Laczniak↗
NASA NTRSDate not supplied

SURFACE EXOSURE TIMESCALES OF APOLLO CORE SAMPLE 73002 SPACE WEATHERED GRAINS

Introduction: Space weathering causes the surface regolith on airless bodies like the Moon to be morphologically, microstructurally, and chemically altered due to micrometeoroid bombardment and solar wind irradiation[1]. These processes produce a multitude of microstructural and chemical changes in individual soil grains that accumulate as grains are exposed on the surface over time. One microstructural feature produced by exposure to the solar wind is the development of ion-damaged rims on regolith grains via H+ and He+ ion irradiation. Also present are solar energetic particle (SEP) tracks, which are nanoscale lineations of ionization damage within grain interiors formed by high energy solar flare ions(primarily Fe group nuclei) which penetrate millimeters below the surface [2]. Recent work has confirmed that the thickness of solar wind-damaged amorphous rims on anorthite grains, nanocrystalline rims on olivine grains, and their respective SEP track densities are correlated with their surface exposure ages [3].Core sample 73002, recently released under the Apollo Next Generation Sample Analysis (ANGSA) Program, has provided an opportunity to study material collected from the light mantle formation during Apollo 17. The light mantle is thought to have been deposited via a landslide originating from the neighboring South Massif [4]. Spectral profiles and ferromagnetic resonance measurements of bulk soils sampled at cm-intervals from 73002 indicate the existence of mature regolith extending ~8 cm below the surface, suggesting the presence of an in-situ reworking zone in the core[5,6].Here we present the distribution of SEP track densities, solar wind damaged rim widths, and the corresponding surface exposure ages of grains residing in the proposed in-situ reworking zone of core 73002. Methods: Bulk samples of regolith from the first eight intervals and every following fourth interval down the core (dissection Pass 2) were delivered to Purdue University as <45 μm size fractions. The first eight0.5 cm intervals, representing the top 4cmof regolith, were individually dry sieved to a<20 μm size fraction, and grains were prepared by ultramicrotomy for analysis in the scanning transmission electron microscope (STEM). Bright field (BF) and dark field (DF) STEM images of solar flare tracks and solar wind damaged rims were acquired on a JEOL 2500SE TEM, equipped with a 60 mm2ultra-thin window silicon drift energy dispersive X-ray (EDX) spectrometer at NASA John-son Space Center. Grain compositions were determined by EDX compositional spectrum imaging. SEP track densities and amorphous rim thicknesses were measured on BF and DF images. Results: The fraction of grains with discernable space weathering features decreased with depth, with 100% in the first interval exhibiting space weathering features as opposed to ~60% in Interval 8.BF and DF STEM images show splash-melt and vapor deposited rims on outermost grain margins with embedded Fe-bearing nanoparticles ranging in size up to ~10 nm in diameter. Images also show solar-wind damaged rims below the vapor deposits, and SEP tracks present in grain interiors. The rim thicknesses and SEP track densities were determined using the methods of [3] for 54grains spanning the top 4 cm. ~80% of the grains analyzed were anorthite and ~20% were olivine. The track production rate from[3] was used to estimate the surface exposure times of the grains in this study. The majority of exposure times are in the 1 -5 MY range for all intervals. The lowest value was 3.8x 10¬5years in Interval 8and the highest value was1.1x 107years in Interval 6. Grains with the highest solar wind damage rim thicknesses and SEP track densities are found in Interval 6.The highest rim thickness and track density observed for anorthiteis126.5 nm and4.7 x 1011tracks/cm2, while for olivine they are 98.6 nm and 1.83 x 1011tracks/cm2, respectively. Discussion: Intervals from the top 4 cm of 73002 show similar SEP track density and solar wind damaged rim thickness distributions. Spectral and ferromagnetic resonance measurements of 73002 indicate an in-situ reworking zone up to~8 cm below the surface[5,6].The depth analyzed in this work is within the core’s uppermost in-situ reworking zone and may serve as an explanation to the homogenous distribution of exposure ages. The decreasing abundance of space weathered features with depth is consistent with regolith mixing models showing an exponential decay in regolith maturity with depth over time[7].A maximum surface exposure age determined via SEP track density is approximately 10million years. This timescale is consistent with the lower estimate of surface exposure ages of the light mantle determined in previous studies, which can range from 10s to over 100 Ma [4].It also falls within the core regolith reworking development timescale of ~17 Ma [5,6]. Additional analysis will be performed for a further seven intervals in 73002.

J A McFadden↗
NASA NTRSDate not supplied

The NASA Facility for Astromaterials Research at the Johnson Space Center – A National Laboratory for Planetary Research

The Astromaterials Research and Exploration Science (ARES) Division at the NASA Johnson Space Center houses a unique combination of laboratories, instruments, infrastructure, technical ex-pertise, and other assets for conducting broad-based world-class planetary research. These facilities have been accessed for decades by hundreds of external scientists, including faculty, post-docs, students, and interns, most at no cost and on a collaborative basis. With funding through NASA’s Planetary Science Enabling Facilities (PSEF) program, we have estab-lished the NASA Facility for Astromaterials Research (NFAR) to expand access to and enhance these labora-tories for a diverse and inclusive external user base, thus maximizing the science return from research funded by R&A programs in NASA’s Planetary Sci-ence Division (PSD). NFAR enables cutting edge planetary sample analyses, making new scientific dis-coveries possible, in addition to training the next-generation of planetary scientists. NFAR laboratories are co-located with JSC Curation that houses all NASA-controlled astromaterials collections, thus ena-bling direct access to both research and curation exper-tise, to facilitate specialized sample handling and anal-ysis of allocated samples (from JSC and other sample collections) to PIs, particularly those affiliated with institutions that historically have limited or no access to in-house analytical or experimental facilities.

J Filiberto↗
NASA NTRSDate not supplied

Determining Surface Exposure Ages of Regolith Grains in Lunar Core Sample 73002 By Investigating Solar Particle Irradiation Damage

Space weathering causes the surface soils of airless bodies like the Moon to be micro-structurally and chemically altered by exposure to micrometeoroid bombardment and solar wind irradiation. These alterations accumulate in surface grains with continued residence in the uppermost millimeters of regolith. Low energy solar wind ions (largely H+ and He+) produce a layer of radiation damage as they become implanted in grain surfaces. Also present are solar energetic particle (SEP) tracks, which are nanoscale lineations within grain interiors formed by heavy, high-energy ions (mainly Fe group nuclei) penetrating up to millimeters below the surface. Recent work has determined that the width of solar wind-damaged rims on anorthite and olivine, and their respective SEP track densities are correlated with each other and with grain surface exposure age. Core sample 73002, recently released under the Apollo Next Generation Sample Analysis (ANGSA) Program, has provided an opportunity to study material collected from the light mantle formation in the Taurus-Littrow Valley during Apollo 17. The light mantle is thought to have been deposited vial and slide originating from the neighboring South Massif. Spectral analysis of bulk core soils found a plagioclase rich composition, confirming a highlands origin of the formation. Spectral profiles and ferromagnetic resonance (FMR) measurements of bulk soils sampled at cm-intervals from 73002 indicate that regolith up to~9.5 cm in depth have maturity indices consistent with longer durations of surface processing than samples deeper in the core. Thus, this upper ~9 cm layer likely represents the maximum extent of an in-situ reworking zone which may have persisted over 5 to 17million years. Here we present an analysis of grain exposure ages within the in-situ reworking zone of 73002derived from SEP track density measurements via transmission electron microscopy.

J A McFadden↗
NASA NTRSDate not supplied

Coordinated Microstructural and Isotopic Characterization of Diamond Inclusions within the Kenna Ureilite

Introduction: The origin of diamonds in ureilitic meteorites, a major family of ultramafic achondrites, has long been debated, with various formation mechanisms inferred, including: 1) shock conversion of preexisting graphite due to a hypervelocity impact on the ureilite parent body [e.g., 1]; 2) vapor deposition during condensation of the solar nebula [e.g., 2]; or 3) static transformation in the mantle of a large planetesimal (>1000 km in diameter) [e.g., 3]. The Kenna ureilite is a 10.9 kg stone that was found in Kansas in 1972 and is dominantly composed of olivine and pigeonite (68% and 22% modal abundance, respectively), together with minor metal and carbon-rich regions. Within the carbon-rich domains researchers have identified microdiamonds up to ~10 µm in size [4]. Methods: Due to the proximity of the extremely hard microdiamonds with soft graphite and moderately hard silicates, achieving an appropriately flat surface for electron backscatter diffraction (EBSD) analysis has proven challenging. We have, therefore, employed a Hitachi ArBlade 5000 broad beam Ar ion milling system to prepare a sample with an adequately uniform surface flatness across the various minerals. The ion milling dramatically im-proved indexing of the EBSD patterns and facilitated high-resolution microstructural analysis of the carbon-rich domains. After microstructural EBSD analyses using an Oxford Symmetry detector we collected coordinated hy-perspectral cathodoluminescence (CL) analyses using a Gatan Monarc system mounted on a JEOL 7900F field emission (FE) scanning electron microscope at NASA Johnson Space Center. A focused ion beam (FIB) foil was extracted from a region of interest and analyzed using a JEOL 2500 FE scanning transmission electron microscope (STEM). In situ carbon and nitrogen isotopic analyses were collected from diamond-bearing domains using a Cameca NanoSIMS 50L at NASA JSC. Results: The carbon rich regions occur as tabular domains between polygonal olivine and pigeonite, and are composed of aggregates of micrometer-scale diamond with intermediate graphite, oxides and metal grains. Within the microdiamonds, {111} twins are abundant, many of which form ragged lamellae consistent with mechanical twinning. The microdiamond assemblages appear to pseudomorph tabular graphite habits, which together with the abundant deformation twins, support a shock transformation mechanism for microdiamond formation within the Kenna meteorite. Further supporting this observation, the diamond laths show close alignment of <111> and <110> between domains, consistent with a solid-state transformation from graphite along <0001> and <1-210>, respec-tively [5]. A FIB foil was extracted from a region with mechanical twins, and high resolution STEM analyses reveal cross-cutting veins of graphite and oriented kamacite crystals together with additional sets of {111} nano-twins formed in at least three orientations. Isotopic analyses of C and N reveal sector zoning patterns [cf. 3] that are unre-lated to the diamond substructure identified by EBSD yet consistent with hyperspectral CL images. Conclusions: These data provide new constraints on microdiamond formation within ureilites. The microdia-monds exhibit orientation variants defined by aligned <111> and <110> axes consistent with inherited crystallo-graphic orientations from transformation of a single hexagonal graphite parent crystal [5]. Crosscutting the micro-diamonds are veins of graphite and kamacite, together with additional {111} nanotwins. Taken together these data suggest that microdiamonds from ureilites formed from a solid state, diffusionless transformation from graphite, likely associated with a major shock event, which was subject to subsequent reversion either during decompression or a later deformation event. The N and C isotopic sector zoning is unrelated to diamond microstructures and likely reflects inheritance from the parent graphite crystal.

Ureilite↗
NASA NTRSDate not supplied

Initial Characterization of Intermediate Bennu Particles to Evaluate Lithologic Diversity and Mineralogic and Redox Equilibria

The OSIRIS-REx spacecraft returned regolith from asteroid Bennu to Earth September 24, 2023 [1]. As part of initial science allocations and sample analysis plan [2], JSC science team members received aggregate material from within the TAGSAM head (OREX-803017-0) to characterize. Here we report the results of analyses that have been carried out to determine mineralogic composition, surface features, and overall lithologic diversity in Bennu particles. These initial observations will inform additional analyses that will address the nature of pre-biotic and pre-solar material, formation location of Bennu, geologic history of the asteroid, and its impact/collisional/re-accretion history [3].

Bennu↗
NASA NTRSDate not supplied

Identification of Presolar Grains in Quick Look Samples of Asteroid Bennu Returned By the OSIRIS-REx Mission

The OSIRIS-REx spacecraft returned regolith sample from the B-type asteroid Bennu on September 24, 2023. The first samples to be analyzed, termed the Quick Look samples, are comprised of material collected from the avionics deck of the OSIRIS-REx sample canister. Initial mineralogical analysis of the Quick Look sample revealed a diversity of components, including hydrated and anhydrous silicates, sulfides, magnetite, phosphates, and abundant organic matter. Each constituent has their own origin and history, and their study can inform us of the history of Bennu and its parent asteroid. The analysis plan for asteroid Bennu samples is guided by hypotheses that address specific periods of Bennu’s history, from the pre-accretionary epoch to the OSIRIS-REx epoch. The pre-accretionary epoch studies aim to characterize materials that predate the formation of the solar system. One hypothesis that falls under this epoch is that Bennu contains presolar materials derived from diverse sources. These presolar materials include stardust grains that condensed from the outflows of evolved stars or the ejecta of novae and supernovae (SN), as well as organic matter that formed in the interstellar medium. Here we report the identification of C-rich presolar stardust grains in the Bennu Quick Look sample. Isotopically anomalous organic matter in this sample is reported in.

A N Nguyen↗
NASA NTRSDate not supplied

Coordinated Analysis of Isotopically Anomalous Nanoglobules and Insoluble Organic Matter in Quick-Look Samples From Asteroid Bennu

Spectral characterization of B-type asteroid Bennu by the Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) spacecraft indicated abundant organic matter with similarities to insoluble organic matter (IOM) in meteorites. IOM in chondritic samples occurs in multiple forms, including a fluffy morphology and submicron-sized rounded nanoglobules. Isotopic anomalies in H, C, and N have been observed in both morphologies and are postulated to result from low-temperature chemical reactions in the molecular cloud or outer protoplanetary disk [e.g., 2,3]. We tested the hypothesis that Bennu also contains such isotopically anomalous organic matter by conducting coordinated in situ analysis of “quick-look” samples collected from the avionics deck of the OSIRIS-REx sample canister. This study expands our understanding of the fundamental nature of Bennu and its pre-accretionary environment by investigating the morphologies and isotopic distribution of presolar organic matter in Bennu.

A N Nguyen↗
NASA NTRSDate not supplied

EVALUATION OF OSIRIS-REx CONTACT PAD SAMPLERS FOR BENNU SURFACE REGOLITH PARTICLES.

NASA’s Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) mission returned material from asteroid Bennu to Earth in September 2023. In addition to the bulk sample (>70 g), OSIRIS-REx’s Touch-and-Go Sample Acquisition Mechanism (TAGSAM) also collected material from Bennu using surface particle collectors or contact pads. The TAGSAM head has 24 of these circular contact pads evenly distributed around the perimeter, each ~1.75 cm in diameter and consisting of stainless-steel Velcro-like loops. From their positions on the bottom of the TAGSAM head, the contact pads were intended to collect regolith material from the very surface of Bennu by trapping fine particles (<5 mm) in the Velcro. The science team would then be able to examine individual particles for evidence of surface exposure, particularly the microstructural, chemical, and spectral characteristics of space weathering. Here we present an evaluation of the OSIRIS-REx contact pads and the material they returned from Bennu.

M. S. Thompson↗
NASA NTRSDate not supplied

Salty Bennu: Halite and Sylvite in Fines Returned by OSIRIS-REx

Salt phases such as halite (NaCl) and sylvite (KCl) are important hosts of halogens (e.g., Br and I) and volatile alkali metals (i.e., Na, K) and are very rare in extra-terrestrial materials. Halite and sylvite have been discovered in carbonaceous chondrite clasts in ordinary chondrite meteorite falls Zag H3-6 regolith breccia (Zag), Monahans (1998) breccia (Monahans), and Sidi El Habib H5 chondrite, as well as on the surface of particles from asteroid Itokawa. Yet, it is uncertain whether the evaporites are indigenous or exogenous to their respective parent bodies, and their origin is debated. Analysis of the extinct 129I/129Xe decay system and 40Ar/39Ar show that halite in Zag may have formed within the first 8 Myr of the solar system, possibly from aqueous fluids during local and episodic low-temperature alteration on the parent body. Halite and sylvite in Zag are characterized by light δ37Cl values of −1.7 ‰. Halite in Zag could have been transported from the outer solar system, perhaps a P- or D-class asteroid, as indicated by O, H, N, and C isotopes. An alternative is a cometary or interstellar ice origin due to their deuterium-rich and 16O-poor composition.

N E Timms↗
NASA NTRSDate not supplied

The Nature of Space Weathering in Samples From Asteroid (162173) Ryugu Revealed By Coordinated Analysis

Space weathering, driven primarily by micrometeorite bombardment and solar wind ion irradiation, alters the morphology, microstructure, and chemistry of the surface regolith on airless bodies. The accumulation of microstructural and chemical space weathering features, including melt deposits, amorphous rims, and nanophase iron-bearing particles (npFe), are associated with alterations of the spectral properties of the regolith. In particular, space weathering changes the spectral slope and reflectance of surface materials, and causes the attenuation of characteristic absorption bands in the visible to near-infrared wave-lengths, as well as a shift towards longer wavelengths of the Christiansen feature (CF)in thermal infrared spectra. Previous studies of space weathering characteristics have focused on siliceous bodies like the Moon and S-type asteroid Itokawa. However, observations of asteroid Ryugu by the JAXA Hayabusa2 spacecraft and subsequent analyses of returned samples revealed carbonaceous and hydrated materials. These samples provided our first opportunity to constrain the effects of space weathering processes on primitive, C-type asteroids. Analyses of returned samples to understand the space weathering of carbonaceous materials are important for accurately interpreting remote sensing observations of carbonaceous asteroids. In addition, the analysis of Hayabusa2 samples from Ryugu paved the way for the analysis of samples from the asteroid Bennu, re-turned by the NASA OSIRIS-REx mission. As space weathering impacts the microstructure, chemistry, and spectral characteristics of asteroidal surfaces, here we report the results of a coordinated analytical study of the micro-and nano-scale signatures of space weathering in samples returned from Ryugu.

L E Melendez↗