Search NASA⌕ Search

Engineering topics

LaPorta, Anthony W.

Publications and source records attributed to LaPorta, Anthony W..

Survivability of TREAT Zircaloy 3 Cladding

This chapter analyzes the effects of oxidation, growth, thermal stress, and fatigue on the Zircaloy-3 alloy used in TREAT fuel assembly cladding. The cladding surrounding the fuel is a protective shell which is used to prevent damage to the enclosed fuel. Therefore, its integrity is importance to guarantee this protection. All of the major factors which can affect the Zircaloy-3 cladding are considered in this chapter and investigated. Limits to operation are determined. The oxidation of Zircaloy-3 in air is of interest to air cooled reactors. The temperature range of interest is from room temperature where the fuel is stored for long periods of time, through the temperature range encountered in normal operation, to the highest temperatures which are possible in extreme accident situations. This temperature range is considered in this chapter to be from room temperature to 1100 C. Growth of the cladding can occur due to the buildup of the oxide layer which is less dense than the original metal and causes the metal to stretch. Thermal stress of the cladding can cause rupture of the cladding and therefore loss of protection to the fuel. Fatigue of the metal cladding occurs due to fuel handling.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A Complex-Geometry Validation Experiment for Advanced Neutron Transport Codes

The Idaho National Laboratory (INL) has initiated a focused effort to upgrade legacy computational reactor physics software tools and protocols used for support of core fuel management and experiment management in the Advanced Test Reactor (ATR) and its companion critical facility (ATRC) at the INL.. This will be accomplished through the introduction of modern high-fidelity computational software and protocols, with appropriate new Verification and Validation (V&V) protocols, over the next 12-18 months. Stochastic and deterministic transport theory based reactor physics codes and nuclear data packages that support this effort include MCNP5[1], SCALE/KENO6[2], HELIOS[3], SCALE/NEWT[2], and ATTILA[4]. Furthermore, a capability for sensitivity analysis and uncertainty quantification based on the TSUNAMI[5] system has also been implemented. Finally, we are also evaluating the Serpent[6] and MC21[7] codes, as additional verification tools in the near term as well as for possible applications to full three-dimensional Monte Carlo based fuel management modeling in the longer term. On the experimental side, several new benchmark-quality code validation measurements based on neutron activation spectrometry have been conducted using the ATRC. Results for the first four experiments, focused on neutron spectrum measurements within the Northwest Large In-Pile Tube (NW LIPT) and in the core fuel elements surrounding the NW LIPT and the diametrically opposite Southeast IPT have been reported [8,9]. A fifth, very recent, experiment focused on detailed measurements of the element-to-element core power distribution is summarized here and examples of the use of the measured data for validation of corresponding MCNP5, HELIOS, NEWT, and Serpent computational models using modern least-square adjustment methods are provided.

97 MATHEMATICS AND COMPUTING↗