Search NASA⌕ Search

Engineering topics

Lakhtakia, Akhlesh

Publications and source records attributed to Lakhtakia, Akhlesh.

Buffer layer between a planar optical concentrator and a solar cell

The effect of inserting a buffer layer between a periodically multilayered isotropic dielectric (PMLID) material acting as a planar optical concentrator and a photovoltaic solar cell was theoretically investigated. The substitution of the photovoltaic material by a cheaper dielectric material in a large area of the structure could reduce the fabrication costs without significantly reducing the efficiency of the solar cell. Both crystalline silicon (c-Si) and gallium arsenide (GaAs) were considered as the photovoltaic material. We found that the buffer layer can act as an antireflection coating at the interface of the PMLID and the photovoltaic materials, and the structure increases the spectrally averaged electron-hole pair density by 36% for c-Si and 38% for GaAs compared to the structure without buffer layer. Numerical evidence indicates that the optimal structure is robust with respect to small changes in the grating profile.

14 SOLAR ENERGY↗

Asymmetric coupling and dispersion of surface-plasmon-polariton waves on a periodically patterned anisotropic metal film

The morphology of a columnar thin film (CTF) of silver renders it an effectively biaxially anisotropic continuum. CTFs of silver deposited on one-dimensional gratings of photoresist showed strong blazing action and asymmetrically coupled optical radiation to surface-plasmon-polariton (SPP) waves propagating only along one direction supported by either the CTF/photoresist or the CTF/air interfaces. Homogenization of the CTFs using the Bruggeman formalism revealed them to display hyperbolic dispersion, and the dispersion of SPP waves was adequately described thereby.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Periodically multilayered planar optical concentrator for photovoltaic solar cells

A planar optical concentrator comprising a periodic multilayered isotropic dielectric material backed by a metallic surface-relief grating was theoretically examined for silicon photovoltaics. The concentrator was optimized using a differential evolution algorithm for solar-spectrum-integrated power-flux density. Further optimization was carried out for tolerance to variations in the incidence angle, spatial dimensions, and dielectric properties. The average electron-hole pair density in a silicon solar cell can be doubled, and the material costs substantially diminished by this concentrator, whose efficacy is due to the excitation of waveguide modes and multiple surface-plasmon-polariton waves in a broad spectral regime.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Periodically patterned columnar thin films as blazed diffraction gratings

Periodically patterned columnar thin films (PP-CTFs) were made by evaporating CaF{sub 2} and directing the vapor flux obliquely towards lithographically fabricated micrometer/sub-micrometer gratings. The growth of the PP-CTFs was controlled by the deposition rate to form prismatic air cavities within them. These PP-CTFs function like blazed diffraction gratings with asymmetric diffraction patterns and diffraction efficiencies up to 80% in transmission at ultraviolet-visible wavelengths. Diffraction theory adequately establishes that the blazing action arises due to the prismatic cavities and explains the measured diffraction efficiencies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Grating-coupled excitation of multiple surface plasmon-polariton waves

The excitation of multiple surface plasmon-polariton (SPP) waves of different linear polarization states and phase speeds by a surface-relief grating formed by a metal and a rugate filter, both of finite thickness, was studied theoretically, using rigorous coupled-wave analysis. The incident plane wave can be either p or s polarized. The excitation of SPP waves is indicated by the presence of those peaks in the plots of absorptance vs the incidence angle that are independent of the thickness of the rugate filter. The absorptance peaks representing the excitation of s-polarized SPP waves are narrower than those representing p-polarized SPP waves. Two incident plane waves propagating in different directions may excite the same SPP wave. A line source could excite several SPP waves simultaneously.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Propagation of surface waves and waveguide modes guided by a dielectric slab inserted in a sculptured nematic thin film

Wave propagation guided by a dielectric slab inserted in a sculptured nematic thin film (SNTF) was studied theoretically. Two types of guided waves can be identified: (i) surface (Dyakonov-Tamm) waves guided by one or both of the two planar interfaces of the dielectric slab and the SNTF, and (ii) waveguide modes in the dielectric waveguide formed by the slab with the SNTF as the cladding. As the thickness of the dielectric slab is increased, the number of waveguide modes increases. If the slab thickness is less than twice the e-folding distance into the dielectric slab, the Dyakonov-Tamm waves propagate coupled to both interfaces; the coupling decreases and eventually vanishes as the slab thickness increases, so that Dyakonov-Tamm waves are guided by the individual dielectric-SNTF interfaces independently. The chosen structure supports the propagation of Dyakonov-Tamm waves in all directions, in contrast to the restricted range of propagation supported by a single SNTF-dielectric interface. Propagation of both Dyakonov-Tamm waves and waveguide modes should occur in practice with negligible attenuation, in contrast to that of surface-plasmon-polariton waves that are guided when the dielectric slab is replaced by a metal slab.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Negative real parts of the equivalent permittivity, permeability, and refractive index of sculptured-nanorod arrays of silver

Thin films comprising parallel nanorods were deposited by directing silver vapor obliquely toward a plane substrate. The direction of the vapor flux was varied in two different ways to sculpture the nanorods in different shapes. The reflection and transmission coefficients of the thin films were measured at three wavelengths in the visible regime for normal-illumination conditions for two linear-polarization states, using walk-off interferometry and polarization interferometry. The authors found that sculpturing significantly affects the signs of the real parts of the equivalent permittivity, permeability, and refractive index of the silver thin films for the two polarization states at different wavelengths. Thus, vapor deposition combined with sculpturing can be useful for large-scale production of materials having different equivalent constitutive parameters with negative real parts.

36 MATERIALS SCIENCE↗

Dyakonov-Tamm waves guided by the interface between two structurally chiral materials that differ only in handedness

The boundary-value problem of the propagation of Dyakonov-Tamm waves guided by the planar interface between two structurally chiral materials that are identical except for structural handedness was formulated and numerically solved. Detailed analysis showed that either two or three different Dyakonov-Tamm waves can propagate. These waves have different phase speeds and degrees of localization to the interface with a sudden handedness change. The most localized Dyakonov-Tamm waves are essentially confined to within a small number of structural periods of the interface on either side.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗