Engineering topics
Lambrigsten, Bjorn
Publications and source records attributed to Lambrigsten, Bjorn.
AIRS Volcanic Plume Detection Rapid Response: Algorithm, Web Page & Applications
UNKNOWN
Evaluation of Temperature Trends from MW+IR Sounders, GPS-RO and Reanalysis Using Nonparametric Multivariate Regression Techniques
No abstract provided
Observing Fast Mesoscale Atmospheric Processes with a Geostationary Microwave Sounder
A geostationary microwave sounder, GeoSTAR, capable of providing continuous monitoring every 15 minutes of atmospheric temperature, water vapor, clouds, precipitation, and wind in the presence of clouds and precipitation, which will add tremendously to our ability to observe rapidly evolving dynamic atmospheric phenomena, such as hurricanes and severe storms, monsoonal moisture flow, and atmospheric rivers, has been developed at the Jet Propulsion Laboratory. GeoSTAR uses aperture synthesis to overcome the difficulty of attaining adequate spatial resolution from geostationary orbit. It is made possible with new technology that has now been developed and fully tested. Low-risk mission development can start as soon as funding becomes available. The sensor can be hosted on a commercial communications satellite, which could reduce the cost substantially. Plans have been developed at JPL for such a mission, called “GeoStorm”, focused on observing severe convective storms – tropical cyclones, mesoscale convective systems, and extratropical cyclones – with a goal of improving our understanding, modeling and prediction of these destructive phenomena. It can equally well be configured as an operational mission, where the goal is to collect data for immediate assimilation into regional forecast systems, provide “now-casting” as the storms unfold, and support post-disaster relief and recovery efforts. With key observables including vertical profiles of temperature, water vapor, wind and precipitation over a wide area, many focused applications are possible, particularly pertaining to aviation, transportation and marine operations, in both the civilian and defense domains.
An Update on Oceanic Precipitation Rate and its Zonal Distribution in Light of Advanced Observations from Space
This study contributes to the estimation of the global mean and zonal distribution of oceanic precipitation rate using complementary information from advanced precipitation measuring sensors and provides an independent reference to assess current precipitation products. Precipitation estimates from the Tropical Rainfall Measuring Mission (TRMM) precipitation radar (PR) and CloudSat cloud profiling radar (CPR) were merged, as the two complementary sensors yield an unprecedented range of sensitivity to quantify rainfall from drizzle through the most intense rates. At higher latitudes, where TRMM PR does not exist, precipitation estimates from Aqua's Advanced Microwave Scanning Radiometer for Earth Observing System (AMSR-E) complemented CloudSat CPR to capture intense precipitation rates. The high sensitivity of CPR allows estimation of snow rate, an important type of precipitation at high latitudes, not directly observed in current merged precipitation products. Using the merged precipitation estimate from the CloudSat, TRMM, and Aqua platforms (this estimate is abbreviated to MCTA), the authors' estimate for 3-yr (2007-09) nearglobal (80degS-80degN) oceanic mean precipitation rate is approx. 2.94mm/day. This new estimate of mean global ocean precipitation is about 9% higher than that of the corresponding Climate Prediction Center (CPC) Merged Analysis of Precipitation (CMAP) value (2.68mm/day) and about 4% higher than that of the Global Precipitation Climatology Project (GPCP; 2.82mm/day). Furthermore, MCTA suggests distinct differences in the zonal distribution of precipitation rate from that depicted in GPCPand CMAP, especially in the Southern Hemisphere.
Initial Results from the GeoSTAR-II Laboratory Demonstration
The Geostationary Synthetic Thinned Aperture Radiometer (GeoSTAR) team recently concluded its second Earth Science Technology Office (ESTO) IIP-07, "GeoSTAR technology development and risk reduction for PATH". The major accomplishments during this project at JPL were:1) Demonstrate performance and scalability of the 183 GHz receivers 2) Local oscillator phasing architecture and technology 3) Subarray design validation including feedhorns, manifolds and alignment 4) System demonstration of signal distribution topology and measurements. Significant progress has been made to retiring risk of the various subsystems.
Low Noise Amplifier Receivers from Millimeter Wave Atmospheric Remote Sensing
We currently achieve 3.4 dB noise figure at 183GHz and 2.1 dB noise figure at 90 GHz with our MMIC low noise amplifiers (LNAs) in room temperature. These amplifiers and the receivers we have built using them made it possible to conduct highly accurate airborne measurement campaigns from the Global Hawk unmanned aerial vehicle, develop millimeter wave internally calibrated radiometers for altimeter radar path delay correction, and build prototypes of large arrays of millimeter receivers for a geostationary interferometric sounder. We use the developed millimeter wave receivers to measure temperature and humidity profiles in the atmosphere and in hurricanes as well as to characterize the path delay error in ocean topography altimetry.
Low Noise Amplifiers and Receivers for Remote Sensing
The study of atmospheric dynamics and climatology depend on accurate and frequent measurements of temperature and humidity profiles of the atmosphere. These measurements furthermore enable highly accurate measurements of ocean topography by providing total column water vapour data for radar path delay correction. The atmospheric temperature profile is characterized at the oxygen molecule absorption frequencies (60 and 118 GHz) and the humidity profile at the water molecule absorption frequencies (23 and 183 GHz). Total column measurements can be achieved by comparing measured radiometric temperatures at atmospheric window channels, such as 90, 130, and 166 GHz. The standard receiver technology for these frequencies was diode mixers with MMIC LNAs being applied at the lower frequencies. The sensitivity of millimeter wave receivers improved significantly with the introduction of the low noise 35 nm gate length InP MMIC amplifiers. We currently achieve 3 dB noise figure at 180 GHz and 2 dB noise figure at 90 GHz with our MMIC low noise amplifiers (LNAs) in room temperature. These amplifiers and the receivers we have built using them made it possible to conduct highly accurate airborne measurements campaigns from the Global Hawk unmanned aerial vehicle, develop millimeter wave internally calibrated radiometers for altimeter radar path delay correction, and build prototypes of large arrays of millimeter receivers for a geostationary interferometric sounder. We use the developed millimeter wave receivers to measure temperature and humidity profiles in the atmosphere and in hurricanes as well as to characterize the path delay error in ocean topography alitmetery.
Prototype development of a Geostationary Synthetic Thinned Aperture Radiometer (GeoSTAR)
Weather prediction and hurricane tracking would greatly benefit of a continuous imaging capability of a hemisphere at millimeter wave frequencies. We are developing a synthetic thinned aperture radiometer (STAR) prototype operating from 50 to 56 GHz as a ground-based testbed to demonstrate the technologies needed to do full earth disk atmospheric temperature soundings from Geostationary orbit with very high spatial resolution. The prototype consists of a Y-array of 24 MMIC receivers that are compact units implemented with low noise InP MMIC LNAs, second harmonic I-Q mixers, low power IF amplifiers and include internal digital bias control with serial line communication to enable low cost testing and system integration. Furthermore, this prototype STAR includes independent LO and noise calibration signal phase switching circuitry for each arm of the Y-array to verify the operation and calibration of the system.
Microwave instrument update
Explore the source record for details and available documents.