Quantum mechanical studies of the depolymerization of lignin by the ZnCl2:Ethylene Glycol Deep Eutectic Solvent.
Abstract not provided.
Engineering topics
Publications and source records attributed to Landera, Alexander.
Abstract not provided.
Abstract not provided.
Abstract not provided.
Abstract not provided.
Here, this review describes the measurement and prediction of volatility characteristics, especially Reid vapor pressure, of gasoline blended with oxygenates such as those that could be derived from biomass. Including more advanced biofuels containing oxygen in gasoline affects critical fuel properties related to the volatility of the blended fuel. The vapor pressure of oxygenate-gasoline blends typically exhibits non-ideal behavior requiring updated measurement and prediction tools to ensure the resulting fuel meets all safety and performance specifications. The review discusses the suitability of established methods to measure Reid vapor pressure in blends containing oxygenates. We then survey methods used to predict vapor-liquid equilibria along with a description of suitability of these methods for use on gasoline-oxygenate blends. Lastly, we compare the outputs of a series of models to Reid vapor pressure measurements for a series of oxygenates in a real gasoline to illustrate the potential and shortcomings of the models.
Abstract not provided.
The article addresses the formation mechanisms of naphthalene and indene, which represent prototype polycyclic aromatic hydrocarbons (PAH) carrying two six-membered and one five- plus a six-membered ring. Theoretical studies of the relevant chemical reactions are overviewed in terms of their potential energy surfaces, rate constants, and product branching ratios; these data are compared with experimental measurements in crossed molecular beams and the pyrolytic chemical reactor emulating the extreme conditions in the interstellar medium (ISM) and the combustion-like environment, respectively. The outcome of the reactions potentially producing naphthalene and indene is shown to critically depend on temperature and pressure or collision energy and hence the reaction mechanisms and their contributions to the PAH growth can be rather different in the ISM, planetary atmospheres, and in combustion flames at different temperatures and pressures. Specifically, this paradigm is illustrated with new theoretical results for rate constants and product branching ratios for the reaction of phenyl radical with vinylacetylene. The analysis of the formation mechanisms of naphthalene and its derivatives shows that in combustion they can be produced via hydrogen-abstraction-acetylene-addition (HACA) routes, recombination of cyclopentadienyl radical with itself and with cyclopentadiene, the reaction of benzyl radical with propargyl, methylation of indenyl radical, and the reactions of phenyl radical with vinylacetylene and 1,3-butadiene. In extreme astrochemical conditions, naphthalene and dihydronaphthalene can be formed in the C 6 H 5 + vinylacetylene and C 6 H 5 + 1,3-butadiene reactions, respectively. Ethynyl-substituted naphthalenes can be produced via the ethynyl addition mechanism beginning with benzene (in dehydrogenated forms) or with styrene. The formation mechanisms of indene in combustion include the reactions of the phenyl radical with C 3 H 4 isomers allene and propyne, reaction of the benzyl radical with acetylene, and unimolecular decomposition of the 1-phenylallyl radical originating from 3-phenylpropene, a product of the C 6 H 5 + propene reaction, or from C 6 H 5 + C 3 H 5 .
In this work, the reaction dynamics of the dicarbon radical C 2 (a 3 Π u /X 1 Σ g + ) in the singlet and triplet state with C 4 H 6 isomers 2-butyne, 1-butyne and 1,2-butadiene were investigated at collision energies of about 26 kJ mol -1 using the crossed molecular beam technique and supported by ab initio and RRKM calculations. The reactions are all indirect, forming C 6 H 6 complexes through barrierless additions by dicarbon on the triplet and singlet surfaces. Isomerization of the C 6 H 6 reaction intermediate leads to product formation by hydrogen loss in a dicarbon–hydrogen atom exchange mechanism forming acyclic C 6 H 5 reaction products through loose exit transition states in overall exoergic reactions.
Reaction dynamics of the D5-phenyl radical with phenylacetylene were explored in crossed molecular beams at a collision energy of 120.7 kJ mol -1 supported by ab initio calculations. The reaction displays indirect, complex forming scattering dynamics, and adduct formation, with D5-phenyl attacking the phenyl ring of phenylacetylene at the ortho, meta and para positions over small entrance barriers. The adduct (C 6 D 5 C 8 H 6 ) undergoes hydrogen emission through tight exit transition states of 34–47 kJ mol -1 above the separated products. The phenyl addition–hydrogen elimination mechanism produces various ethynylbiphenyls exoergically by 25–38 kJ mol -1 . No phenanthrene was formed under these experimental conditions.
Ab initio CCSD(T)/CBS//B3LYP/6-311G** calculations of the potential energy surface for possible dissociation channels of the phenyl radical are combined with microcanonical Rice-Ramsperger-Kassel-Marcus calculations of reaction rate constants in order to predict statistical product branching ratios in photodissociation of c-C{sub 6}H{sub 5} at various wavelengths. The results indicate that at 248 nm the photodissociation process is dominated by the production of ortho-benzyne via direct elimination of a hydrogen atom from the phenyl radical. At 193 nm, the statistical branching ratios are computed to be 63.4%, 21.1%, and 14.4% for the o-C{sub 6}H{sub 4}+ H, l-C{sub 6}H{sub 4} ((Z)-hexa-3-ene-1,5-diyne) + H, and n-C{sub 4}H{sub 3}+ C{sub 2}H{sub 2} products, respectively, in a contradiction with recent experimental measurements, which showed C{sub 4}H{sub 3}+ C{sub 2}H{sub 2} as the major product. Although two lower energy pathways to the i-C{sub 4}H{sub 3}+ C{sub 2}H{sub 2} products are identified, they appeared to be kinetically unfavorable and the computed statistical branching ratio of i-C{sub 4}H{sub 3}+ C{sub 2}H{sub 2} does not exceed 1%. To explain the disagreement with experiment, we optimized conical intersections between the ground and the first excited electronic states of C{sub 6}H{sub 5} and, based on their structures and energies, suggested the following photodissociation mechanism at 193 nm: c-C{sub 6}H{sub 5} 1{yields} absorption of a photon {yields} electronically excited 1{yields} internal conversion to the lowest excited state {yields} conversion to the ground electronic state via conical intersections at CI-2 or CI-3{yields} non-statistical decay of the vibrationally excited radical favoring the formation of the n-C{sub 4}H{sub 3}+ C{sub 2}H{sub 2} products. This scenario can be attained if the intramolecular vibrational redistribution in the CI-2 or CI-3 structures in the ground electronic state is slower than their dissociation to n-C{sub 4}H{sub 3}+ C{sub 2}H{sub 2} driven by the dynamical preference.
Various mechanisms of the formation of naphthalene and its substituted derivatives have been investigated by ab initio G3(MP2,CC)/B3LYP/6-311G** calculations of potential energy surfaces for the reactions of one and two C{sub 2}H additions to styrene combined with RRKM calculations of product branching ratios under single-collision conditions. The results show that for the C{sub 2}H + styrene reaction, the dominant routes are H atom eliminations from the initial adducts; C{sub 2}H addition to the vinyl side chain of styrene is predicted to produce trans or cis conformations of phenylvinylacetylene (t- and c-PVA), whereas C{sub 2}H addition to the ortho carbon in the ring is expected to lead to the formation of o-ethynylstyrene. Although various reaction channels may lead to a second ring closure and the formation of naphthalene, they are not competitive with the direct H loss channels producing PVAs and ethynylstyrenes. However, c-PVA and o-ethynylstyrene may undergo a second addition of the ethynyl radical to ultimately produce substituted naphthalene derivatives. {alpha}- and {beta}-additions of C{sub 2}H to the side chain in c-PVA are calculated to form 2-ethynyl-naphthalene with branching ratios of about 30% and 96%, respectively; the major product in the case of {alpha}-addition would be cis-1-hexene-3,5-diynyl-benzene produced by an immediate H elimination from the initial adduct. C{sub 2}H addition to the ethynyl side chain in o-ethynylstyrene is predicted to lead to the formation of 1-ethynyl-naphthalene as the dominant product. The C{sub 2}H + styrene {yields}t-PVA+ H/c-PVA+ H/o-ethynylstyrene, C{sub 2}H +c-PVA{yields} 2-ethynyl-naphthalene + H, and C{sub 2}H +o-ethynylstyrene {yields} 1-ethynyl-naphthalene + H reactions are calculated to occur without a barrier and with high exothermicity, with all intermediates, transition states, and products lying significantly lower in energy than the initial reactants, and hence to be fast even at very low temperature conditions prevailing in Titan's atmosphere or in the interstellar medium. If styrene and C{sub 2}H are available and overlap, the sequence of two C{sub 2}H additions can result in the closure of a second aromatic ring and thus provide a viable route to the formation of 1- or 2-ethynyl-naphthalene. The analogous mechanism can be extrapolated to the low-temperature growth of polycyclic aromatic hydrocarbons (PAH) in general, as a step from a vinyl-PAH to an ethynyl-substituted PAH with an extra aromatic ring.
The aromatic benzene molecule (C{sub 6}H{sub 6})-a central building block of polycyclic aromatic hydrocarbon molecules-is of crucial importance for the understanding of the organic chemistry of Saturn's largest moon, Titan. Here, we show via laboratory experiments and electronic structure calculations that the benzene molecule can be formed on Titan's surface in situ via non-equilibrium chemistry by cosmic-ray processing of low-temperature acetylene (C{sub 2}H{sub 2}) ices. The actual yield of benzene depends strongly on the surface coverage. We suggest that the cosmic-ray-mediated chemistry on Titan's surface could be the dominant source of benzene, i.e., a factor of at least two orders of magnitude higher compared to previously modeled precipitation rates, in those regions of the surface which have a high surface coverage of acetylene.