Engineering topics

Landi, E.

Publications and source records attributed to Landi, E..

31 records · Page 2

NASA NTRS2005

Thermal and Kinetic Properties of Motions in a Prominence Activation and Nearby Loop

We perform a quantitative analysis of the thermal properties of a prominence activation and motions in a nearby loop. In order to make measurements of the quickly moving features seen in prominences in the UV we use the SOHO/SUMER spectrograph to take a time series of exposures from a single pointing position, providing a measurement of spectral line properties as a function of time and position along the slit. The lines observed cover a broad range of temperatures from 80,000 - 1.6 million K. These measurements are combined with TRACE movies in transition region and coronal temperature bands to obtain more complete information concerning prominence structure and motions. The resulting observations allow us to analyze the thermal and kinetic energy of the moving sources as functions of time. The loop and prominence are most apparent in lines formed at temperatures below 250,000 K. We find that in most cases the temperature distribution of plasma in a moving feature changes relatively little over time periods of about 20 minutes.

Kucera, Therese↗

NASA NTRS2004

Prominence Energetics Measured with SOHO/SUMER and TRACE

The mechanisms by which solar prominences are filled with plasma are still undetermined. In this study we perform a quantitative analysis of the thermal properties of moving features in prominences in order to put constraints on models of prominence formation and dynamics. In order to make such measurements of the quickly moving features seen in prominences in the W we use the SOHO/SUMER spectrograph to take a time series of exposures from a single pointing position, providing a measurement of spectral line properties as a function of time and position along the slit. temperatures from 80,000 - 1.6 million K. These measurements are combined with TRACE movies in transition region and coronal temperature bands to obtain more complete information concerning prominence structure and motions. The resulting observations allow us to analyze the thermal and kinetic energy of the moving prominence sources as functions of time.

Kucera, T.↗

NASA NTRS2004

Atomic Data and Spectral Line Intensities for Ne III

Electron impact collision strengths, energy levels, oscillator strengths, and spontaneous radiative decay rates are calculated for Ne III. The configurations used are 2s(sup 2)2p(sup 4), 2s2p(sup 5), 2p(sup 6), 2s(sup 2)2p(sup 3)3(sub s), 2s(sup 2)2p(sup 3)3p, and 2s(sup 2)2p(sup 3)3d giving rise to 86 fine-structure levels in intermediate coupling. Collision strengths are calculated at five incident energies, 5.2, 10, 15, 20 and 25 Ry. Excitation rate coefficients are calculated as a function of electron temperature by assuming a Maxwellian electron velocity distribution. Using the excitation rate coefficients and the radiative transition rates, statistical equilibrium equations for level populations are solved at electron densities covering the range of 10(exp 8) - 10(exp 14)/cc at an electron temperature of logTe/K = 5.0, corresponding to maximum abundance of Ne III. Relative spectral line intensities are calculated.

Landi, E.↗

NASA NTRS2004

Atomic Data and Spectral Line Intensities for Ar XII

Electron impact collision strengths; energy levels; oscillator strengths and spontaneous radiative decay rates are calculated for Ar XII. The configurations used are 2s(exp 2)2p(exp 3), 2s2p(exp4), 2p(exp 5), 2s22p23s, 2s(exp 2)2p(exp 2)3p, and 2s(exp 2)2p(exp 2)3d giving rise to 72 fine-structure levels in intermediate coupling. Collision strengths are calculated at five incident energies: 35,70, 105, 140 and 175 Ry. They are complemented by Coulomb-Born limits towards infinite collision energy for forbidden transitions and line strengths for optically allowed transitions. Excitation rate coefficients are calculated as a function of electron temperature by assuming a Maxwellian electron velocity distribution. Using the excitation rate coefficients and the radiative transition rates, statistical equilibrium equations for level populations are solved at electron densities covering the range of 10(exp 8)-101(exp 14) cm(exp -3) at an electron temperature of log T(sub e)/K = 6.4, corresponding to maximum abundance of Ar XII. Relative spectral line intensities are calculated.

Eissner, W.↗

NASA NTRS2004

Atomic Data and Spectral Line Intensities for Ar XII

Electron impact collision strengths, energy levels, oscillator strengths and spontaneous radiative decay rates are calculated for Ar XII. The configurations used are 2s(sup 2)p(sup 3), 2s(sup 2)p(sup 4), 2p(sup 5), 2s(sup 2)2p(sup 2)3s, 2s(sup 2)2p(sup 2)3p, and 2s(sup 2)2p(sup 2)3d giving rise to 72 fine-structure levels in intermediate coupling. Collision strengths are calculated at five incident energies: 35, 70, 105, 140 and 175 Ry. They are complemented by Coulomb-Born limits towards infinite collision energy for forbidden transitions and line strengths for optically allowed transitions. Excitation rate coefficients are calculated as a function of electron temperature by assuming a Maxwellian electron velocity distribution. Using the excitation rate coefficients and the radiative transition rates, statistical equilibrium equations for level populations are solved at electron densities covering the range of 10(exp 8)-10(exp 14)/cm(exp 3) at an electron temperature of log T(sub e)/K = 6.4, corresponding to maximum abundance of AR-XII. Relative spectral line intensities are calculated.

Eissner, W.↗

NASA NTRS2003

DEM Measurements of Moving UV Features in Prominences

Multi-thermal features with speeds of 5-70 km/s perpendicular to the line of sight are common in the prominences which showed traceable motions. These speeds are noticeably higher than the typical speeds of 5-20 km/s observed in H-alpha data from "quiet" prominences and are more typical of "activated" prominences in which H-alpha blob speeds of up to 40 km/s have been reported. In order to make a more quantitative determination of the thermal properties of the moving features seen in the UV, we use the SOHO Cororial Diagnostic Spectrometer to take a time series of exposures from a single pointing position, providing a measurement of spectral line properties as a function of time and position along the slit. The resulting observations in lines of O III, O IV, O V, Ne IV, Ne V, Ne VI, and Ne VII allow us to calculate the differential emission measure of moving features and provide a test of models of flows in prominences.

Oegerle, William↗

NASA NTRS2003

Solar Flare Abundances of Potassium, Argon, and Sulphur

The absolute coronal abundances of potassium has been determined for the first time from X-ray solar flare line and continuous spectra together with absolute and relative abundances of Ar and S. Potassium is of importance in the continuing debate concerning the nature of the coronal/photospheric element abundance ratios which are widely considered to depend on first ionization potential since it has the lowest FIP of any common element in the Sun. The measurements were obtained with the RESIK crystal spectrometer on the Coronas-F spacecraft. A differential emission measure DEM = const. x exp (-(beta)T(sub e) was found to be the most consistent with the data out of three models considered. We find that the coronal ratio [K/H] = 3.7 x 10(exp - 7), a factor 3 times photospheric, in agreement with other observations using line-to-line ratios. Our measured value for the coronal ratio [Ar/H] = 1.5 x 10(exp -6) is significantly less than photospheric, indicating that there is a slight depletion of this high-FIP element in the corona. For S (an intermediate-FIP element) we obtained [S/H] = 2.2 x 10(exp - 5), approximately the same as in previous work.

Oegerle, William↗

NASA NTRS2003

Atomic Data and Emission Line Intensities for CA VII

In the present work we calculate energy levels, transition probabilities and electron-ion collisional excitation rates for the 3s(sup 2)3p(sup 2), 3s3p(sup 3) and 3s(sup 2)3p3d configurations of the silicon-like ion Ca VII. The total number of intermediate coupling levels considered is 27. Collision strengths are calculated at seven incident electron energies: 8, 10, 15, 20, 30,40 and 60 Ry, using the Distorted Wave approximation and a 5-configuration model. Excitation rate coefficients are calculated by assuming a Maxwellian distribution of velocities and are used to calculate level populations and line emissivities under the assumption of statistical equilibrium. Line intensity ratios are calculated and compared with observed values measured from SERTS and SOHO/CDS spectra. The diagnostic potential of Ca VII is demonstrated, with particular emphasis on the possibility to measure the Ne/Ca relative abundance through simultaneous observations of Ca VII and N VI lines. Ca VII proves to be an excellent tool for the study of the FIP effect in the solar transition region.

Landi, E.↗

NASA NTRS2003

Atomic Data and Spectral Line Intensities for S XI

Electron impact collision strengths, energy levels, oscillator strengths and spontaneous radiative decay rates are calculated for S XI. The configurations included are 2s(sup 2)2psup 2), 2s2p(sup 3), 2p(sup 4), 2s(sup 2)2p3l and 2s(sup 2)2p4l (I = s , p , d) giving rise to 72 fine-structure levels in intermediate coupling. Collision strengths are calculated at five incident energies, 32, 60, 90, 120, and 150 Ry. Excitation rate coefficients are calculated as a function of electron temperature by assuming a Maxwellian electron velocity distribution. Using the excitation rate coefficients and the radiative transition rates, statistical equilibrium equations for level populations are solved: The effects of resonances, proton rates, photoexcitation and cascades on level populations have been investigate. The predicted S XI line intensities are compared with EUV and UV observations of the quiet and active Sun.

Landi, E.↗

NASA NTRS2003

Thermal Properties of Prominence Motions as Observed in the UV

The mechanisms by which solar prominences are filled with plasma are still undetermined. In this study we perform a quantitative analysis of the thermal properties of moving features in prominences in order to put constraints on models of prominence formation and dynamics. In order to make such measurements of quickly moving features seen in prominences in the UV we use the SOHO instruments SUMER and CDS to take a time series of exposures at a single pointing position, providing a measurement of spectral line properties as a function of time and position along the slit. The resulting observations in spectral lines in a range of 'transition region' temperatures allow us to analyze the thermal properties of the moving prominence sources as a function of time.

Kucera, T.↗

NASA NTRS2002

Atomic Data and Spectral Line Intensities for Ne III

A number of satellites and rockets have been launched to observe radiation from the Sun and other astrophysical objects. Line radiation is emitted when the electron impact excited levels decay to the lower levels by photon emission. From this radiation, the physical parameters such as electron temperature and density of the astrophysical plasma, elemental abundance, and opacity can be inferred. Ne III lines have been observed in H II regions, Ne-rich filaments in supernovae, and planetary nebulae. The allowed line at 489.50 Angstroms due to the transition 2s(sup 2) 2p(sup 5) (sup 3) P2 (goes to) 2s(sup 2)2p(sup 4)(sup 3)P2 has been identified in the solar spectrum by Vernazza and Reeves using Skylab observations. Other Ne III lines in the solar EUV spectrum have been reported by Thomas and Neupert based on observations from the Solar EUV Rocket Telescope and Spectrograph (SERTS) instrument. Atomic data for Ne III have been calculated by using a set of programs developed at, University College, London. The Superstructure and Distorted Wave (DW) programs have been updated over the years. In the Superstructure program, configuration interaction can be taken into account and radial functions are calculated in a modified Thomas-Fermi-Amaldi potential. This is a statistical potential and depends on parameters lambda 1 which are determined by optimizing the weighted sum of term energies. They are found to be lambda(sub 0)=1.2467, lambda(sub 1)=1.1617, and lambda(sub 2)=1.0663. The relativistic corrections are included by using the Breit-Pauli Hamiltonian as a perturbation to the nonrelativistic Hamiltonian. The same potential is used to calculate reactance matrices in the DW approximation in LS coupling. Collision strengths in intermediate coupling are obtained by using term coupling coefficients obtained from the Superstructure program. In this calculation, the configurations used are 2s(sup 2)2p(sup 4), 2s2p(sup 5), 2s(sup 2)2p(sup 3)3s, 2s(sup 2)p(sup 3)3d giving rise to 57 fine-structure levels in intermediate coupling.

Bhatia, A. K.↗

NASA NTRS2001

Atomic Data and Spectral Line Intensities for Ni XXI

Electron impact collision strengths, energy levels, oscillator strengths and spontaneous radiative decay rates are calculated for Ni XXI. The configurations used are 2s(sup 2)2p(sup 4), 2s2p(sup 5), 2p(sup 6), 2s(sup 2)2p(sup 3)3s, and 2s(sup 2)3p(sup 3)3d giving rise to 58 fine-structure levels in intermediate coupling. Collision strengths are calculated at five incident energies, 85, 170, 255, 340, and 425 Ry. Excitation rate coefficients are calculated by assuming a Maxwellian electron velocity distribution at an electron temperature of log T(sub e)(K)=6.9, corresponding to maximum abundance of Ni XXI. Using the excitation rate coefficients and the radiative transition rates, statistical equilibrium equations for level populations are solved at electron densities 10(exp 8)-10(exp 14) per cubic centimeter. Relative spectral line intensities are calculated. Proton excitation rates between the lowest three levels have been included in the statistical equilibrium equations. The predicted intensity ratios are compared with available observations.

Bhatia, A. K.↗

NASA NTRS2001

Atomic Data and Spectral Line Intensities for Ne III

Electron impact collision strengths, energy levels, oscillator strengths and spontaneous radiative decay rates are calculated for Ne III. The configurations used are 2s(sup 2) 2p(sup 4),2s2p(sup 5),2s(sup 2) 2p(sup 3)3s, and 2s(sup 2)3p(sup 3)3d giving rise to 57 fine-structure levels in intermediate coupling. Collision strengths are calculated at five incident energies, 5, 10, 15, 20, and 25 Ry. Excitation rate coefficients are calculated by assuming a Maxwellian electron velocity distribution at an electron temperature of logT,(K)=5.0, corresponding to maximum abundance of Ne III. Using the excitation rate coefficients and the radiative transition rates, statistical equilibrium equations for level populations are solved at electron densities covering the range of 10(exp 8)-10(exp 14) per cubic centimeter. Relative spectral line intensities are calculated. Proton excitation rates between the lowest three levels have been included in the statistical equilibrium equations. The predicted Ne III line intensities are compared with SERTS rocket measurements of a solar active region and of a laboratory EUV light source.

Bhatia, A. K.↗