Engineering topics
Publications and source records attributed to Landis, Geoffrey A..
Proposed faceted cover glass takes advantage of total internal reflection to increase efficiency of solar photovoltaic cell. Angled facets of cover glass refract light as it enters. Portion of light reflected at surface of solar cell undergoes total internal reflection at surface of cover glass, rather than partially escaping, and returns to surface of solar cell.
Explore the source record for details and available documents.
Reducing the reflection from the surface of InP is important for increasing the efficiency of solar cells and photodetectors. In this paper a new technique for reducing reflectance of glass-encapsulated InP is reported. Low-angle grooves are produced on the surface by a maskless anisotropic etch. Light reflected from the low angle grooves is trapped by total internal reflection at the glass/air interface and directed back to the InP surface. A significant decrease in surface reflection is measured.
A simple apparatus to measure the minority carrier lifetime in InP has been developed. The technique stimulates the sample with a short pulse of light from a diode laser and measures the photoluminescence decay to extract the minority carrier lifetime. The photoluminescence lifetime in InP as a function of doping on both n- and p-type material is examined. The results also show a marked difference in the lifetime of n-type InP and p-type InP of similar doping levels. N-type InP shows a lifetime considerably longer than the expected radiative limited lifetime.
Several new uses of satellite tethers are discussed, including: (1) using tether extension to reposition a satellite in orbit without fuel expenditure by extending a mass on the end of a tether; (2) using a tether for energy storage to power the satellite during eclipse; and (3) using a tether for eccentricity pumping to correct perturbations in the orbit and as a means of adding energy to the orbit for boosting and orbital transfer.
A large portion of the drag of a space station in LEO is generated by its solar array; for a baseline 25-kW solar array in 334-km orbit, 1800 kg of reboost propellant/year is needed to counteract solar array drag. A study is conducted of the drag reduction potential of three possible solar array orientations: sun-pointing, sun-pointing during illumination/edge-on during eclipse, and edge-on during entire orbit. An 18.5-percent drag-makeup propellant reduction is found to be obtainable with the sun-pointing/edge-on eclipse orientation technique.
Copper indium diselenide, cadmium telluride, and amorphous silicon alloy solar cells have achieved noteworthy performance and are currently being studied for space power applications. Cadmium sulfide cells had been the subject of much effort but are no longer considered for space applications. A review is presented of what is known about the radiation degradation of thin film solar cells in space. Experimental cadmium telluride and amorphous silicon alloy cells are reviewed. Damage mechanisms and radiation induced defect generation and passivation in the amorphous silicon alloy cell are discussed in detail due to the greater amount of experimental data available.
Developments in thin-film amorphous and polycrystalline photovoltaic cells are reviewed and discussed with a view to potential applications in space. Two important figures of merit are discussed: efficiency (i.e., what fraction of the incident solar energy is converted to electricity), and specific power (power to weight ratio).
NASA, through Project Pathfinder, has put in place an advanced technology program to address future needs of manned space exploration. Included in the missions under study is the establishment of outposts on the surface of Mars. The Surface Power program in Pathfinder is aimed at providing photovoltaic array technology for such an application (as well as for the lunar surface). Another important application is for unmanned precursor missions, such as the photovoltaic-power aircraft, which will scout landing sites and investigate Mars geology for a 1 to 2 year mission without landing on the surface. Effective design and utilization of solar energy depend to a large extent on adequate knowledge of solar radiation characteristics in the region of solar energy system operation. The two major climatic components needed for photovoltaic system designs are the distributions of solar insolation and ambient temperature. These distributions for the Martian climate are given at the two Viking lander locations but can also be used, to the first approximation, for other latitudes. One of the most important results is that there is a large diffuse component of the insolation, even at high optical depth, so that solar energy system operation is still possible. If the power system is to continue to generate power even on high optical opacity days, it is thus important that the photovoltaic system be designed to collect diffuse irradiance as well as direct. In absence of long term insolation and temperature data for Mars, the data presented can be used until updated data are available. The ambient temperature data are given as measured directly by the temperature sensor; the insolation data are calculated from optical depth measurements of the atmosphere.
Use of resources available in situ is a critical enabling technology for a permanent human presence in space. A permanent presence on Mars, e.g., requires a large infrastructure to sustain life under hostile conditions. As a resource on Mars, atmospheric CO2 is as follows: abundant; available at all points on the surface; of known presence; chemically simple; and can be obtained by simple compression. Many studies focus on obtaining O2 and the various uses for O2 including life support and fuel; discussion of CO, the coproduct from CO2 fixation revolves around its uses as a fuel, being oxidized back to CO2. Several new proposals are studied for CO2 fixation through chemical, photochemical, and photoelectrochemical means. For example, the reduction of CO2 to hydrocarbons such as acetylene (C2H2) can be accomplished with H2. C2H2 has a theoretical vacuum specific impulse of approx. 375 secs. Potential uses were also studied of CO2, as obtained or further reduced to carbon, as a reducing agent in metal oxide processing to form metals or metal carbides for use as structural or power materials; the CO2 can be recycled to generate O2 and CO.
Several novel proposals are examined for propellant production from carbon dioxide and monoxide and hydrogen. Potential uses were also examined of CO as a fuel or as a reducing agent in metal oxide processing as obtained or further reduced to carbon. Hydrogen can be reacted with CO to produce a wide variety of hydrocarbons, alcohols, and other organic compounds. Methanol, produced by Fischer-Tropsch chemistry may be useful as a fuel; it is easy to store and handle because it is a liquid at Mars temperatures. The reduction of CO2 to hydrocarbons such as methane or acetylene can be accomplished with hydrogen. Carbon monoxide and hydrogen require cryogenic temperatures for storage as liquids. Noncryogenic storage of hydrogen may be accomplished using hydrocarbons, inorganic hydrides, or metal hydrides. Noncryogenic storage of CO may be accomplished in the form of iron carbonyl (FE(CO)5) or other metal carbonyls. Low hydrogen content fuels such as acetylene (C2H2) may be effective propellants with low requirements for earth derived resources. The impact on manned Mars missions of alternative propellant production and utilization is discussed.
The mass budget is detailed for system architectures that use rocket fuels of propellants derived from Deimos and Phobos to transport 10000 ton payloads of exofuel (exoatmospheric fuels) or exomass (exoatmospheric mass) to earth orbits. A point design for the system architecture is used that includes a self-sustaining cycle, which requires no materials from earth, and an infrastructure, which must be emplaced to start the cycle. Both the use of steam rockets and the use of liquid oxygen and liquid hydrogen is examined. It is shown that a system delivering 10000 tons of payload to a highly elliptical earth orbit requires approximately 23000 tons of water for use by nuclear heated steam rockets to effect completely propulsive, round trip maneuvers. It is also shown that about 8000 tons will be available for sale at low earth orbit, each cycle, and that the number of cycles can number in the tens before critical components are replaced.
In order to effect large-scale return of extraterrestrial resources to Earth orbit, it is desirable to optimize the propulsion system to maximize the mass of payload returned per unit energy expended. This optimization problem is different from the conventional rocket propulsion optimization. A rocket propulsion system consists of an energy source plus reaction mass. In a conventional chemical rocket, the energy source and the reaction mass are the same. For the transportation system required, however, the best system performance is achieved if the reaction mass used is from a locally available source. In general, the energy source and the reaction mass will be separate. One such rocket system is the nuclear thermal rocket, in which the energy source is a reactor and the reaction mass a fluid which is heated by the reactor and exhausted. Another energy-limited rocket system is the hydrogen/oxygen rocket where H2/O2 fuel is produced by electrolysis of water using a solar array or a nuclear reactor. The problem is to choose the optimum specific impulse (or equivalently exhaust velocity) to minimize the amount of energy required to produce a given mission delta-v in the payload. The somewhat surprising result is that the optimum specific impulse is not the maximum possible value, but is proportional to the mission delta-v. In general terms, at the beginning of the mission it is optimum to use a very low specific impulse and expend a lot of reaction mass, since this is the most energy efficient way to transfer momentum. However, as the mission progresses, it becomes important to minimize the amount of reaction mass expelled, since energy is wasted moving the reaction mass. Thus, the optimum specific impulse will increase with the mission delta-v. Optimum I(sub sp) is derived for maximum payload return per energy expended for both the case of fixed and variable I(sub sp) engines. Sample missions analyzed include return of water payloads from the moons of Mars and of Saturn.
Utilization of resources available in situ is a critical enabling technology for permanent human presence in space. A permanent presence on Mars, for example, requires a tremendous infrastructure to sustain life under hostile conditions (low oxygen, partial pressure, ultraviolet radiation, low temperature, etc.). There are numerous studies on the most accessible of Martian resources: atmospheric carbon dioxide. As a resource on Mars, atmospheric CO2 is: (1) abundant; (2) available at all points on the surface; (3) of known presence, requiring no precursor mission to verify; (4) chemically simple; and (5) can be obtained by simple compression, with no requirements of mining or beneficiation equipment operation. Several novel proposals are presented for CO2 fixation through chemical, photochemical, and photoelectrochemical means.
Production, power, and propulsion technologies for using oxygen and metals derived from lunar resources are discussed. The production process is described, and several of the more developed processes are discussed. Power requirements for chemical, thermal, and electrical production methods are compared. The discussion includes potential impact of ongoing power technology programs on lunar production requirements. The performance potential of several possible metal fuels including aluminum, silicon, iron, and titanium are compared. Space propulsion technology in the area of metal/oxygen rocket engines is discussed.
The current state of profile etching in GaAs and InP is summarized, including data on novel geometries attainable as a function of etchant temperature, composition, and rate; substrate orientation; carrier concentration; and oxide thickness between substrate and photoresist. V-grooved solar cells were manufactured with both GaAs and InP, and the improved optical absorption was demonstrated. Preferred parameters for various applications are listed and discussed.
Several novel proposals are examined for propellant production from carbon dioxide and monoxide and hydrogen. Potential uses were also examined of CO as a fuel or as a reducing agent in metal oxide processing as obtained or further reduced to carbon. Hydrogen can be reacted with CO to produce a wide variety of hydrocarbons, alcohols, and other organic compounds. Methanol, produced by Fischer-Tropsch chemistry may be useful as a fuel; it is easy to store and handle because it is a liquid at Mars temperatures. The reduction of CO2 to hydrocarbons such as methane or acetylene can be accomplished with hydrocarbons. Carbon monoxide and hydrogen require cryogenic temperatures for storage as liquid. Noncryogenic storage of hydrogen may be accomplished using hydrocarbons, inorganic hydrides, or metal hydrides. Noncryogenic storage of CO may be accomplished in the form of iron carbonyl (FE(CO)5) or other metal carbonyls. Low hydrogen content fuels such as acetylene (C2H2) may be effective propellants with low requirements for earth derived resources. The impact on manned Mars missions of alternative propellant production and utilization is discussed.
One solution to the problem of shielding crew from particulate radiation in space is to use active electromagnetic shielding. Practical types of shield include the magnetic shield, in which a strong magnetic field diverts charged particles from the crew region, and the magnetic/electrostatic plasma shield, in which an electrostatic field shields the crew from positively charged particles, while a magnetic field confines electrons from the space plasma to provide charge neutrality. Advances in technology include high-strength composite materials, high-temperature superconductors, numerical computational solutions to particle transport in electromagnetic fields, and a technology base for construction and operation of large superconducting magnets. These advances make electromagnetic shielding a practical alternative for near-term future missions.