Assessing the impacts of dynamic soft-templates innate to switchable ionic liquids on nanoparticulate green rust crystalline structures
Explore the source record for details and available documents.
99 GENERAL AND MISCELLANEOUS↗
Engineering topics
Lao, David B.
Publications and source records attributed to Lao, David B..
Investigation of reactive intermediates during the synthesis of di-n-butylmagnesium
Not Available
Nune, Satish K.↗
Process for making carbon-based nano-rods from switchable ionic liquids and devices and processes incorporating same
A method of making carbon-based nano-rods from switchable ionic liquids (SWIL) that incorporates the SWIL is disclosed. Resulting nano-rods provide adsorption and spontaneous desorption of water at selected relative humidity values that find use in selected applications and devices.
42 ENGINEERING↗
Mesoscopic Structure Facilitates Rapid CO 2 Transport and Reactivity in CO 2 Capture Solvents
ABSTRACT: We present two-dimensional (2D) and three-dimensional (3D) chemical speciation of a switchable ionic liquid CO2 capture solvent to asses how these fluids facilitate CO2 transport at high solution viscosities. In this study, we use in situ liquid time-of-flight secondary ion mass spectrometry (ToF-SIMS) enabled by a vacuum-compatible microreactor. SIMS spectra show the existence of 1-((1,3-dimethylimidazolidin-2-ylidene)amino)propan-2-ol (IPADM-2-BOL) and CO2 + IPADM-2-BOL, con-firming the proposed zwitterionic CO2 binding mechanism. 2D and 3D chemical mapping showed IPADM-2-BOL exhibited a heterogeneous molecular structure, with regions of CO2-free IPADM-2-BOL coexisting with clusters of zwitterionic carbonate ions (IPADM-2-BOL + CO2). The solvent was composed of ~10–20 nm clusters of zwitterionic carbonate ions at any CO2 loading above 0%. The size of clusters was found not to grow with CO2 loading; rather, the concentration and distribution of clusters in-creased. 2D measurements also confirmed that the small clusters of bound CO2 aggregate in solution, coalescing to form >500 nm aggregates, and concurrently creating regions of unreacted solvent where CO2 can readily diffuse and immediately eact. The het-erogeneous domains introduce a trade-off between rapid CO2 diffusion and reactivity at the expense of a high solution viscosity.
Yu, Xiao-Ying↗
Detection of an Iridium-Dihydrogen Complex: A Proposed Intermediate in Ionic Hydrogenation
Addition of high pressures of H2 to five-coordinate [(tBu)4(POCOP)Ir(CO)(H)]OTf [(tBu)4(POCOP) = ?3-C6H3-2,6- (OP(tBu)2)2] complexes results in observation of two new iridium-dihydrogen complexes. If the aryl moiety of the POCOP ligand is substituted with an electron withdrawing protonated dimethylamino group at the para position, hydrogen coordination is enhanced. Five-coordinate Ir-H complexes generated by addition of triflic acid to (tBu)4(POCOP)Ir(CO) species show an Ir-H 1H NMR chemical shift dependence on the number of equivalents of acid present. It is proposed that excess triflic acid in solution facilitates triflate dissociation from iridium, resulting in unsaturated five-coordinate Ir-H complexes. The five-coordinate iridium-hydride complexes were found to catalyze H/D exchange between H2 and CD3OD. The existence of the dihydrogen complexes as well as isotope exchange reactions provide evidence for proposed ionic hydrogenation mechanistic intermediates for glycerol deoxygenation.
Goldberg, Jonathan M.↗
Two coexisting liquid phases in switchable ionic liquids
Switchable ionic liquids (SWILs) derived from organic bases and alcohols are attractive due to their applications in gas capture, separations, and nanomaterial synthesis. However, their exact solvent structure still remains a mystery. Here, we present the first chemical mapping of a SWIL solvent structure using in situ time-of-flight secondary ion mass spectrometry. In situ chemical mapping discovers two coexisting liquid phases and molecular structures vastly different from conventional ionic liquids. SWIL chemical speciation is found to be more complex than the known stoichiometry. Dimers and ionic clusters have been identified in SIMS spectra; and confirmed to be the chemical species differentiating from non-ionic liquids via spectral principal component analysis. Our unique in situ molecular imaging has advanced the understanding of SWIL chemistry and how this “heterogeneous” liquid structure may impact SWILs’ physical and thermodynamic properties and associated applications.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Improving the Molecular Ion Signal Intensity for In Situ Liquid SIMS Analysis
In situ liquid secondary ion mass spectrometry (SIMS) enabled by system for analysis at the liquid vacuum interface (SALVI) has proven to be a promising new tool to provide molecular information at solid–liquid and liquid–vacuum interfaces. However, the initial data showed that useful signals in positive ion spectra are too weak to be meaningful in most cases. In addition, it is difficult to obtain strong negative molecular ion signals when m/z>200. These two drawbacks have been the biggest obstacle towards practical use of this new analytical approach. In this study, we report that strong and reliable positive and negative molecular signals are achievable after optimizing the SIMS experimental conditions. Four model systems, including a 1,8-diazabicycloundec-7-ene (DBU)-base switchable ionic liquid, a live Shewanella oneidensis biofilm, a hydrated mammalian epithelia cell, and an electrolyte popularly used in Li ion batteries were studied. A signal enhancement of about two orders of magnitude was obtained in comparison with non-optimized conditions. Therefore, molecular ion signal intensity has become very acceptable to use for in situ liquid SIMS to study solid–liquid and liquid–vacuum interfaces.
36 MATERIALS SCIENCE↗
Anomalous water expulsion from carbon-based rods at high humidity
Managing water is critical for industrial applications including CO2 capture, catalysis, bio-oil separations and energy storage. Various classes of materials have been designed for these applications, achieving specific water adsorption capacities at a given relative humidity (RH). Three water adsorption-desorption mechanisms are common to inorganic materials: (1) chemisorption, which may lead to the modification of the first coordination sphere; (2) simple adsorption, which is reversible in nature; or (3) capillary condensation, which is irreversible in nature. Regardless of sorption mechanism, all materials known today increase water adsorption capacity with increasing RH; none exhibit repeated adsorption of water at low humidity and release at high humidity. We present here a material that breaks from this convention: a new class of nitrogen containing carbon rods along with nonstoichiometric FeXSY that adsorb water at low humidity, and spontaneously expel half of the adsorbed water when the RH exceeds a 50–80% threshold. Monolayers of water form on the surfaces of the carbon rods, with the amount of water adsorbed directly linked to the aspect ratio of the rods and the available surface area. This unprecedented water expulsion is a reversible physical process. Once a complete monolayer is formed, adjacent rods in the bundles begin to adhere together via formation of a bridging monolayer, reducing the surface area available for water to adhere to. We believe the unique surface chemistry of these carbon rods can be used on other functionalized materials. Such behaviour offers a paradigm shift in water purification and separation: water could be repeatedly adsorbed from a low humidity vapour stream and then expelled into a pure water vapour stream, or humidity-responsive membranes could change their water permeance or selectivity as a function of RH.
36 MATERIALS SCIENCE↗