Search NASA⌕ Search

Engineering topics

Lapsa, Melissa Voss

Publications and source records attributed to Lapsa, Melissa Voss.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

BTRIC Technical Support for Appalachia: FY 2024 Summary Report on Net Negative Carbon Building Demonstration with AgPod

This report investigates the effects of various concentrations of CO 2 on the photosynthesis and biomass accumulation of crops growing in an AgPod, using kale as the test crop. In the first year of the study, increasing the CO 2 concentration in the AgPod was found to promote higher photosynthetic rates in kale plants up to 1,300 ppm (the highest CO 2 concentration measured). An interesting finding was that net photosynthetic rates of kale leaves remain unsaturated until reaching unusually high levels of photosynthetically active radiation (PAR, > 1,200 µmol m -1 s -1 ) and CO 2 concentration (> 1,100 ppm). Such high levels of saturating PAR and CO 2 concentration values rarely occur under natural conditions, suggesting a promising potential for carbon capture via enriched controlled environment agriculture (ECEA). During the second year of the study, a second crop was planted to confirm the actual effects on growth with increased CO 2 concentrations. Our results suggest that growing kale plants in the AgPod system at higher CO 2 levels resulted in a successful and highly productive crop, up to three times the amount grown at 415 CO 2 . Further, the kale plants grown under higher CO 2 conditions (1000 ppm) are not CO 2 saturated and can potentially further improve yield at even higher CO 2 environments.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

2023 Southeast Decarbonization Workshop

Decarbonization refers to a large-scale shift away from fossil fuel sources for energy production and toward energy sources, energy end-use practices, and land management approaches that do not result in a net increase of carbon dioxide in the atmosphere. Decarbonization in the Southeastern United States is distinguished from that of other regions in the country by its potential impact on historically underserved populations and the ways this region’s human–environmental systems are predicted to fare in a climate-altered world. In parallel, ensuring a clean energy transition requires the ability to engage entire communities that are motivated to learn, build, and encourage the spread of so-called clean tech. In contrast to other technology trends from the past century, the foundation of clean tech is a shared sense of purpose—a collective strategy to mitigate the threats of climate change and support a better environment for everyone. As seen in the Office of Science and Technology Policy’s (OSTP’s) Net-Zero Technology Action Plan (2023), decarbonization is best accelerated by simultaneous investments in Innovation, Demonstration, and Deployment of technology in tandem with intentional policy and community-based solutions. The 2023 Southeast Decarbonization Workshop, hosted by the Georgia Institute of Technology (Georgia Tech) and Oak Ridge National Laboratory (ORNL), aimed to bring together members of our communities and a group of regional experts to strategize about opportunities in this important area, as well as to incorporate the important pillar of System Interactions to bridge the gap between clean tech’s intent and its impact.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

BTRIC Technical Support for Appalachia: FY 2023 Summary Report on Net Negative Carbon Building Demonstration with AgPod

This study investigates the effects of various concentrations of carbon dioxide (CO 2 ) on the photosynthesis and biomass accumulation of crops growing in an Agricultural Pod (AgPod). The initial test crop was kale. It has been found that increasing the CO 2 concentration in the AgPod promotes higher photosynthetic rates in kale plants up to 1300 ppm (highest CO 2 concentration). An interesting finding was that net photosynthetic rates of kale leaves remain unsaturated until unusually high levels of photosynthetically active radiation (PAR, > 1200 µmolm-2s-1) and CO 2 concentration (> 1100 ppm) are reached. Such high levels of saturating PAR and CO 2 concentration values rarely occur under natural conditions, suggesting a promising potential for carbon capture via enriched greenhouse crop production. This task is one part of an overall plan to incorporate an AgPod to utilize carbon captured from the atmosphere to achieve net negative carbon emissions in a small neighborhood or community.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Performance Evaluation of Gray-box and Machine Learning Models of a Thermal Energy Storage System with Active Insulation

An interior partition wall integrated with active thermal storage and a dynamic insulation system was built and then installed in an office building in Oak Ridge, Tennessee, TN. This smart wall, termed the Empower Wall, was equipped with embedded pipes in the building envelope core component and an additional pipe network enclosing rigid insulation to switch on and off the active insulation dynamically. The performance of the wall's contribution to cooling load reduction under different parameters has been investigated in previous publications. Aiming to be deployed into model predictive control and other optimization methods, simplified and reliable models for the developed wall and the room accommodating it are required. They are needed to characterize the properties and thermal response of both Empower Wall and building envelope, which form an essential component for accurate indoor temperature or cooling/heating demand prediction. In this study, simplified gray-box and regression models as well as machine learning model were developed and the performance of them were compared and analyzed.

Cui, Borui↗
DOE OSTI2023

Heat pumps in the United States: Market potentials, challenges and opportunities, technology advances

The US heat pump market has been affected by the socioeconomic impacts of the COVID-19 pandemic. However, the Biden administration’s goal of net-zero greenhouse gas emissions by 2050 through electrification and clean energy technologies is accelerating the research, development, and deployment of heat pumps in the United States for improved energy performance, reduced greenhouse gas emissions, and wider adoption. The US heat pump market has experienced steady growth since 2010. In 2020, heat pumps surpassed gas furnace shipments for the first time, and the trend maintains through 2022. The current priority is to improve the affordability of energy and equitable access to heat pump technologies through cost reductions and further accelerate this trend. In addition, current R&D includes emphases on alternative refrigeration technology and lower–global warming potential refrigerants to reduce direct emissions. Heat pump market share is expected to grow as regulatory policies and financial incentives steer the building sector toward decarbonization. This paper reviews policies and market trends, discusses the challenges and opportunities in the current policy landscape, and reviews current research in the United States.

Malhotra, Mini↗
DOE OSTI2023

Heat Pumps in the United States: Market Potentials, Challenges and Opportunities

The US heat pump market has been affected by the socioeconomic impacts of the COVID-19 pandemic. However, the US administration’s electrification goal accelerates the deployment of heat pumps, and the US heat pump market has experienced steady growth since 2010. In 2020, heat pumps surpassed gas furnace shipments for the first time, and the trend maintained through 2022. The heat pump market share is expected to grow as policies, and financial incentives steer the building sector toward decarbonization. Here, this paper reviews the US heat pump market trends and discusses the challenges and opportunities in the current policy landscape.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Empower Wall: Active insulation system leveraging additive manufacturing and model predictive control

Buildings are one of the largest energy consumers worldwide, using large amounts of energy during their construction and for climate control during operation. Active insulation systems (AIS) have been shown to reduce the energy needed for climate control in buildings by dynamically regulating the heat transferred between a building’s interior and exterior. Infrastructure-scale additive manufacturing (AM) has the potential to reduce the resources needed for building construction. Combining these two technologies into a single building envelope would create a path towards more sustainable buildings. A test was conducted for the Federal Energy Management Program (FEMP) Energy Exchange training and trade show, in August 2021, to investigate a new building envelope design, termed the Empower Wall, that utilized an AIS and was constructed using AM. Model predictive control was implemented to manage operation of the Empower Wall in concert with the existing HVAC system. Finally, the prototype system demonstrated that the Empower Wall lowered total energy consumption and reduced the cost of energy used.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Sustainable Low-Carbon Building Materials Workshop Report

The virtual Sustainable Low-Carbon Building Materials Workshop, organized and held by the US Department of Energy’s (DOE’s) Oak Ridge National Laboratory (ORNL) on January 25, 2022, focused on identifying the technical barriers to the research, development, and deployment (RD&D) of low-carbon building materials, and on determining what can be done to overcome these technical barriers in the short-, mid-, and long-term future. The meeting brought together key players in the construction chain from industry, academia, and ORNL to promote collaborations that could help meet the goals of accelerating the development and deployment of low-carbon building materials in the United States, and of developing a net-zero (or even negative) carbon neighborhood in the Southeast United States by 2030.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Performance evaluation of a dynamic wall integrated with active insulation and thermal energy storage systems

Thermal energy storage systems in buildings can store cooling/heating energy during non-peak load hours or when renewable energy sources are available for later use when demanded. Using the building envelope as a thermal battery can help to shave the peak load, reduce the burden in electric grids, and enhance the occupant's thermal comfort. Sensible energy storage on wall systems such as thermally activated building systems can provide an active thermal storage strategy. However, most of the stored energy is used through passive means directed by the thermal lag, which can impede the on-demand release of the stored energy. Integrating active insulation systems with building thermal storage systems can increase the flexibility of charging and discharging time and duration. In this study, a wall system equipped with an active insulation system and thermally activated storage system was designed, and its performance on active cooling energy contribution was studied. The performances of energy storage (charging), release (discharging) of the thermal energy storage energy, and the active insulation system were studied separately and together as an integrated system. Results showed that the thermal properties of the thermal energy storage core material and the pipe spacing of both embedded pipes in the thermal energy storage and hydronic pipes used in the active insulation system affected the wall performance the most out of all the tested wall system parameters. During discharging, the heat flux into the wall was as high as 81.92 W/m 2 . This active insulation system's dynamic R-value varied between less than 1ft 2 •°F•h/BTU (0.18 m 2 •K/W) to 98% of the equally thick foam insulation's R-value.

25 ENERGY STORAGE↗
DOE OSTI2021

Southeastern Focus Place-Based Technology Innovation Summit

This meeting focused on taking science-based action to realize decarbonized, place-based, clean energy interventions that are equally shaped by, inspired from, and committed to the communities they serve. We seek to make clean energy technologies applicable, relevant, and significant for all communities throughout the various scales of place—from Knoxville, Tennessee, to the Tennessee Valley Region, to the entire Southeast. This meeting matched researchers with community groups and businesses that are creating change in the built environment.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

COVID 19 vaccine distribution solution to the last mile challenge: Experimental and simulation studies of ultra-low temperature refrigeration system

Most COVID-19 vaccines require ambient temperature control for transportation and storage. Both Pfizer and Moderna vaccines are based on mRNA and lipid nanoparticles requiring low temperature storage. The Pfizer vaccine requires ultra-low temperature storage (between -80 °C and -60 °C), while the Moderna vaccine requires -30 °C storage. Pfizer has designed a reusable package for transportation and storage that can keep the vaccine at the target temperature for 10 days. However, the last stage of distribution is quite challenging, especially for rural or suburban areas, where local towns, pharmacy chains and hospitals may not have the infrastructure required to store the vaccine. Also, the need for a large amount of ultra-low temperature refrigeration equipment in a short time period creates tremendous pressure on the equipment suppliers. In addition, there is limited data available to address ancillary challenges of the distribution framework for both transportation and storage stages. As such, there is a need for a quick, effective, secure, and safe solution to mitigate the challenges faced by vaccine distribution logistics. The study proposes an effective, secure, and safe ultra-low temperature refrigeration solution to resolve the vaccine distribution last mile challenge. Furthermore, the approach is to utilize commercially available products, such as refrigeration container units, and retrofit them to meet the vaccine storage temperature requirement. Both experimental and simulation studies are conducted to evaluate the technical merits of this solution with the ability to control temperature at -30 °C or -70 °C as part of the last mile supply chain for vaccine candidates.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Construction-Scale Concrete Additive Manufacturing and its Application in Infrastructure Energy Storage

Construction is filled with labor intensive, hazardous, and often wasteful processes. It is also an enormous industry, so improvements in efficiency could have a tremendous economic impact. Construction-scale additive manufacturing is one path toward achieving those improvements. In this paper, a construction-scale additive manufacturing system, called Sky-BAAM, is presented. In addition to possibly leading to more energy-efficient construction practices, leveraging additive manufacturing in construction opens the solution space to more energy efficient building design. One such design, the EMPOWER wall, is also presented in this paper. The exterior of the wall is shaped to maximize heat transfer, while acting as form work for an internal energy-storage system. This allows energy to be stored in the wall during off-peak times and retrieved during peak periods.

Atkins, Celeste↗
DOE OSTI2020

Oak Ridge National Laboratory Annual Sustainability Report 2020

A sustainability report is an annual document published by a company or organization about the economic, environmental, and social impacts that result from its everyday activities. A sustainability report also presents the organization’s values and governance model and demonstrates the link between its strategy and its commitment to a sustainable economy. Sustainability reporting enables organizations to consider their effects on a wide range of sustainability issues, enabling them to be more transparent about the risks and opportunities they face.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

Annotated Bibliography of Literature Addressing the Low-Income Energy Affordability in the United States

Oak Ridge National Laboratory (ORNL), with support from the Georgia Institute of Technology, conducted a “meta review” of low-income energy affordability in the United States. The first step of that review involved the creation of an annotated bibliography of literature focused on low-income household energy affordability, needs, and gaps. This bibliography includes abstracts of the published literature discussed in the meta review. This annotated bibliography describes the relatively current literature (published from 2010 to 2019) that examines low-income energy affordability in the United States. As an initial search criterion, literature was compiled from journal publications archived in Web of Science and Scopus databases.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

Low-Income Energy Affordability: Conclusions From A Literature Review

This paper examines the persistent problem of high energy burdens among low-income households, based on a review of more than 180 publications that pointed to several promising opportunities to address energy affordability including inclusive solar programs, leveraged health care benefits, and behavioral economics. using an equity and affordability lens. Even after decades of weatherization and bill-payment programs, low-income households, on average, continue to spend a higher share of their income on electricity and natural gas bills than any other income group. Energy burden for low-income households is not declining, and it remains persistently high, particularly in the South, in rural America, among minority households, and those with children and elderly residents. On a per household basis, utility companies spend less on energy-efficiency programs for low-income households than for other income groups. In addition, government and utility programs that promote rooftop solar power, electric vehicles, and home energy storage are largely inaccessible to low-income households. Our review identifies promising opportunities to address energy affordability including inclusive solar programs, leveraged health care benefits, behavioral economics, data analytics, advanced information and communication technologies, and grid resiliency. Scalable approaches require linking implementing agencies, programs and policies to tackle the complex web of causes and impacts on low-income households with high energy burdens.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2019

Energy Savings Impacts of Airtightness in U.S. Commercial Buildings

Air leakage in commercial buildings in the U.S. accounts for about one quad of energy annually. As the thermal resistance of commercial building envelopes continues to improve, the relative contribution of air leakage to heating and cooling loads is increasing. Several manufacturers have developed advance air barrier technologies and construction practices to reduce the air leakage in buildings. To help in the market penetration of these advance technologies, advances in easy to use tools for determining the impact of air leakage are needed. Oak Ridge National Laboratory (ORNL), the Air Barrier Association of America, the National Institute of Standards and Technology, and the US-China Clean Energy Research Center for Building Energy Efficiency partnered to develop an online calculator that estimates the potential energy and cost savings in major US, Canadian, and Chinese cities from improvements in airtightness. The calculator estimates the energy and cost savings potential based on the pre and post retrofit air leakage rates for prototype commercial buildings. This report explores extending these savings to determine the national level energy savings potential based on the weightage of commercial building type in different ASHRAE climate zone locations. The base infiltration rate of 1.07 CFM/ft2 was assumed for these calculations and the savings were calculated for three different air infiltration target rates of 0.4 CFM/ft2, 0.25 CFM/ft2, and 0.06 CFM/ft2. The national source energy savings of 238, 283, and 313 TBtu respectively were estimated for these target air infiltration rates.

Bhandari, Mahabir↗