An Assessment of the Sage III/ISS Temperature and Pressure Research Products
Explore the source record for details and available documents.
SAGE III/ISS↗
Engineering topics
Larry Thomason
Publications and source records attributed to Larry Thomason.
OMPS LP Version 2.0 Multi-wavelength Aerosol Extinction Coefficient Retrieval Algorithm
The OMPS Limb Profiler (LP) instrument is de-signed to provide high-vertical-resolution ozone and aerosol profiles from measurements of the scattered solar radiation in the 290–1000 nm spectral range. It collected its first Earth limb measurement on 10 January 2012 and continues to provide daily global measurements of ozone and aerosol profiles from the cloud top up to 60 and 40 km, respectively. The relatively high vertical and spatial sampling allow detection and tracking of sporadic events when aerosol particles are injected into the stratosphere, such as volcanic eruptions or pyro cumulonimbus (PyroCb) events. In this paper we discuss the newly released Version 2.0 OMPS multi-wavelength aerosol extinction coefficient retrieval algorithm. The algorithm now produces aerosol extinction profiles at 510, 600, 674, 745, 869 and 997 nm wavelengths. The OMPS LP Version 2.0 data products are compared to the SAGE III/ISS, OSIRIS and CALIPSO missions and shown to be of good quality and suitable for scientific studies. The comparison shows significant improvements in the OMPS LP retrieval performance in the Southern Hemisphere (SH) and at lower altitudes. These improvements arise from use of the longer wavelengths, in contrast with the V1.0 and V1.5 OMPS aerosol retrieval algorithms, which used radiances only at 675 nm and therefore had limited sensitivity in those regions. In particular, the extinction coefficients at 745, 869 and 997 nm are shown to be the most accurate, with relative accuracies and precisions close to 10% and 15%, respectively, while the 675 nm relative accuracy and precision are on the order of 20%. The 510 nm extinction coefficient is shown to have limited accuracy in the SH and is only recommended for use between 20–24 km and only in the Northern Hemisphere. The V2.0 retrieval algorithm has been applied to the complete set of OMPS LP measurements, and the new dataset is publicly available.
OMPS↗
Evidence for Systematic Changes in the Stratospheric Aerosol Size Following Volcanic Eruptions of Diverse Magnitudes Using Space-Based Instruments
An analysis of multiwavelength stratospheric aerosol extinction coefficient data from the Stratospheric Aerosol and Gas Experiment II and III/ISS instruments is used to demonstrate a coherent relationship between the perturbation in extinction coefficient in an eruption’s main aerosol layer and an apparent change in aerosol size distribution that spans multiple orders of magnitude in the stratospheric impact of an volcanic event. The relationship is measurement-based and does not rely on assumptions about the aerosol size distribution. In this respect, it may be a unique tool to verify the performance of interactive aerosol models used in GCMs and ESMs and may suggest an avenue for improving aerosol extinction coefficient measurements from single channel observations such the Optical Spectrograph and Infrared Imager System. We note limitations on this analysis including that the presence of significant amounts of ash in the main aerosol layer may significantly modulate these results.
Larry Thomason↗
TPSAS-NF1676L-32936-DND
The Stratospheric Aerosol and Gas Experiment III (SAGE III) instrument, installed on the International Space Station (ISS), has completed over a year of data collection and production of science data products. The SAGE III/ISS is a solar and lunar occultation instrument, scanning the light from the sun and moon, through the limb of the Earth’s atmosphere. It was launched in February 2017 and provides data from June 2017 to the present. It continues SAGE's legacy of ozone, aerosol and water vapor profile measurements and extends the lengthy records for monitoring constituents important for understanding stratospheric ozone trends. This presentation shows the preliminary validation results of comparing SAGE III/ISS ozone and water vapor vertical profiles with those of NOAA ESRL/GMD and NIWA mission-funded ozonesondes and frost point hygrometers, and comparisons with other correlative data.
Susan Kizer↗
TPSAS-NF1676L-30150-DND
Validation of science data products from the Stratospheric Aerosol and Gas Experiment (SAGE) III, installed on the International Space Station (ISS) in March 2017, requires intercomparison with validated data sources. The SAGE III/ISS mission is actively utilizing in-situ profile measurements from balloon packages, consisting of a standard meteorological radiosonde, ozonesonde, and frost-point hygrometer, that were launched coincident with SAGE III/ISS overpass opportunities. Some packages have included an aerosol sonde. This provides regional correlations of ozone, water vapor and aerosol extinction between the in-situ measurement data and the SAGE III/ISS profile products. In addition, ground-based LIDAR measurements and aircraft-based measurements of ozone, water vapor, aerosol extinction and nitrogen dioxide will provide additional validation data for correlation with the SAGE III/ISS data products. Initial results of the mission directed validation program will be presented. When possible, operation and launch times were modified to improve the temporal and spatial coincidence between the measurements. Results and progress utilizing LIDAR and balloon-borne aerosol observations are discussed herein, while intercomparisons that make use of ozone sondes is are presented in the companion poster by Kizer et al.
Travis Knepp↗
TPSAS-NF1676L-32505-DND
The Stratospheric Aerosol and Gas Experiment III (SAGE III) instrument, installed on the International Space Station (ISS), has completed over a year of data collection and production of science data products, including the newly released version 5.1 data product. The SAGE III/ISS is a solar and lunar occultation instrument, scanning the light from the sun and moon, through the limb (edge) of the Earth's atmosphere. It was launched in February 2017 and provides data from June 2017 to the present. It continues SAGE's legacy of ozone, aerosol and water vapor profile measurements and extends the lengthy records for monitoring constituents important for understanding stratospheric ozone trends. This presentation shows the preliminary validation results of comparing SAGE III/ISS ozone vertical profiles with those of mission funded ozone sondes, associated lidar, and comparisons with other correlative data.
Susan Kizer↗
TPSAS-NF1676L-29194-DND
The Stratospheric Aerosol and Gas Experiment (SAGE) III instrument was deployed on the International Space Station (ISS) in early March 2017. SAGE III/ISS is the latest in the NASA lineage of solar occultation satellite instruments designed to monitor the vertical distribution of aerosol, ozone and other trace gases in the upper atmosphere. Originally built in the early 2000s, the SAGE III/ISS instrument required extensive testing and refurbishment prior to deliver to ISS, including the replacement of the neutral density filter that has been associated with some instrument response issues during the METEOR/3M mission. In particular, METEOR/3M measurements of the oxygen A-band absorption feature near 762 nm that were to be utilized to retrieve profiles of temperature and pressure were adversely affected by this instrument issue. Preliminary examination of the SAGE III/ISS oxygen A-band spectra indicate that the measurements are of higher fidelity than from the METEOR/3M instrument, which may permit successful retrieval of science quality temperature and pressure products. In this paper, we will provide an overview of the temperature and pressure retrieval algorithm, present preliminary analyses of the SAGE III/ISS oxygen A-band measurements, and an initial assessment of the quality of the temperature and pressure retrievals.
Michael Pitts↗
The 2019 Raikoke Eruption: Can Smoke and Sulfuric acid Aerosol be Separated?
Explore the source record for details and available documents.
SAGE aerosol remost sensing↗
Stratospheric Aerosol and Gas Experiment III on the International Space Station(SAGE III/ISS) Validation of Three Years of Ozone and Water Vapor Data
The Stratospheric Aerosol and Gas Experiment III (SAGE III) instrument installed on the International Space Station (ISS) has completed three years of data collection and production of science data products. The SAGE III/ISS is a solar and lunar occultation instrument that scans the light from the Sun and Moon through the limb of the Earth’s atmosphere to produce vertical profiles of aerosol, ozone, water vapor, and other trace gases. It continues the legacy of previous SAGE instruments dating back to the 1970s to provide data continuity of stratospheric constituents critical for assessing trends in the ozone layer. This presentation shows the validation results of comparing SAGE III/ISS ozone and water vapor vertical profiles with those of in situ and satellite data.
SAGE III ISS ozone water vapor validation↗
The 2019 Raikoke eruption: Can smoke and Sulfuric acid aerosol be separated?
Explore the source record for details and available documents.
Travis N. Knepp↗
Quantifying Particle Size Distribution Errors Derived from SAGE III/ISS Observations
Explore the source record for details and available documents.
Travis N. Knepp↗
Stratospheric Aerosol and Gas Experiment III on the International Space Station (SAGE III/ISS) Validation of Ozone and Water Vapor Data
The Stratospheric Aerosol and Gas Experiment III (SAGE III) instrument installed on the International Space Station (ISS) has completed four years of data collection and production of science data products. The SAGE III/ISS is a solar and lunar occultation instrument that scans the light from the Sun and Moon through the limb of the Earth’s atmosphere to produce vertical profiles of aerosol, ozone, water vapor, and other trace gases. It continues the legacy of previous SAGE instruments dating back to the 1970s to provide data continuity of stratospheric constituents critical for assessing trends in the ozone layer. Recently, the latest version 5.2 data product has been released to the public. This presentation shows the validation results of comparing v5.2 SAGE III/ISS ozone and water vapor vertical profiles with those of in situ and satellite data.
SAGE Stratosphere Stratospheric Mesospheric Ozone ↗
Revisiting GloSSAC Using Space Based Measurements
We revisit Global Space-based stratospheric aerosol climatology (GloSSAC) and extend the dataset through 2021 in the latest version (version 2.2). Several space-based measurements have been used to construct GloSSAC. For version 2.2, important changes include implementation of a revised aerosol/cloud categorization for The Stratospheric Aerosol and Gas Experiment (SAGE III/ISS). SAGE III/ISS began its mission in June 2017. While SAGEIII/ISS makes reliable and robust solar occultation measurements in stratosphere—similar to its predecessors, interpreting aerosol extinction measurements in the vicinity of tropopause and in the troposphere have been a challenge for all SAGE measurements. Here, we study the challenges associated with the discrimination of aerosols and clouds from the extinction measurements. Here, we describe the methods implemented to categorize Clouds and aerosols using available SAGEIII/ISS aerosol measurements. We use version 5.2 of SAGE III/ISS extinction coefficients for the analysis. The current algorithm now classifies standard (background) and non-standard (enhanced) aerosols in the stratosphere and identify enhanced aerosols and aerosol/cloud mixture in the tropopause region. Extinction coefficient measurements from SAGE series of observations make an important contribution in the GloSSAC data base and therefore, the impact of cloud-filtered aerosol extinction coefficient measurements on the latest version of GloSSAC (version 2.2) is also discussed. Additionally, we discuss minor version changes occurred in other space-based measurements that include Optical Spectrograph and InfraRed Imaging System(OSIRIS) and Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation(CALIPSO). We also plan on evaluating and using aerosol extinction profiles from other satellite data sets such as Ozone Mapping Profiler Suite (OMPS) in a future version.
stratospheric aerosol↗
Deriving representative size distributions from UW OPC data for SAGE II extinction measurements
For the purposes of studying the impacts of aerosols on the chemistry and climate of the atmosphere, size distribution information has been inferred from extinction measurements for decades. Using the measurements from the University of Wyoming balloon-borne optical particle counter experiment we have derived representative size distributions at SAGE II channel wavelengths. These are bimodal lognormal size distributions grouped into bins of 525 to 1020 nm extinction ratio. Future work will include expanding this analysis to SAGE III’s channels and considering the effect of a absorbing channel in the IR would have.
Aerosol↗
A New Level 3 Aerosol Product for SAGE III/ISS
- A new Level 3 SAGE III/ISS aerosol product is produced that now includes aerosol/cloud flags. - Cloud screening algorithm is developed based on a method proposed by Thomason and Vernier (2013) with some modifications. - Frequent volcanic and PyroCb events during SAGE III/ISS era (2017-present) makes it challenging to implement a cloud screening algorithm. - We use version 5.2 of SAGE III/ISS for all our analyses.
Mahesh Kovilakam↗
Quantifying Uncertainty in PSD Parameters Inferred from SAGE III/ISS Extinction Spectra
Explore the source record for details and available documents.
SAGE III/ISS↗
Quantifying Uncertainty in Particle Size Distribution Parameters Inferred from SAGE III/ISS Extinction Spectra
Stratospheric aerosols play key roles in the chemistry and radiation balance of the atmosphere and are a key input parameter for global chemistry and climate models. The degree to which aerosols impact chemistry and radiation balance depends primarily on their microphysical properties such as particle size distribution (PSD). The PSD is a mathematical description of the relative abundance of different sized particles within a sampling volume. If the PSD is accurately known then other key modeling parameters (e.g., surface area density) can be derived. Occultation observations from orbital instruments such as SAGE III/ISS have been used to infer these PSD parameters by inverting the extinction coefficient spectra. However, past efforts failed to address two key issues with this methodology: 1. The measurement uncertainty was not accounted for; 2. They assumed the PSDs to be single-mode only, while “real-world” PSDs are predominantly bi-modal. Accounting for both issues in the retrieval will yield an expanded solution space to the inferred PSD parameters; the question is “by how much?” To address this knowledge gap, we propose to carry out a series of simulations and, for every valid SAGE III/ISS data point, determine the range of PSD parameters that yield extinction spectra that are indistinguishable from the SAGE III/ISS data, within the limits of the reported uncertainty. Further, we will expand the solution space, for the first time, to include bimodal distributions. The results of this work will advance Earth system modeling/prediction capability through identifying the uncertainty of PSD parameter estimates using SAGE III/ISS data. The key benefits of this study over previous studies are twofold: 1. we will provide PSD estimates that include bimodal distributions in the solution space, 2. we will provide an uncertainty estimate for these parameters. The results of this study may be used directly in current and future climate and chemistry models.
SAGE III/ISS↗
Monitoring the 2022 Hunga Tonga-Hunga Ha'apai Aerosol Cloud Using Space-Based Observations
- We will analyze the volcanic plume progression, spread and properties using space-based observations - OMPS LP, SAGE III/ISS, CALIPSO, TROPOMI - OMPS LP and SAGE III/ISS are limb instruments that measure the aerosol vertical profiles globally, while CALIPSO is a LIDAR that measures the backscatter and depolarization ratio of the aerosol profiles. -TROPOMI is a UV instrument that measures SO2 and absorbing aerosol total column - Volcanic plume in the upper stratosphere - The main plume in middle stratosphere - Volcanic aerosol transport to SH/NH - Volcanic aerosol optical properties
Atmospheric Science↗