Search NASA⌕ Search

Engineering topics

Lassen, J.

Publications and source records attributed to Lassen, J..

Decay spectroscopy of 160 Eu: Quasiparticle configurations of excited states and structure of K π = 4 + bandheads in 160 Gd

Background: Detailed spectroscopy of neutron-rich, heavy, deformed nuclei is of broad interest for nuclear astrophysics and nuclear structure. Nuclei in the r-process path and following freeze-out region impact the resulting r-process abundance distribution, and the structure of nuclei midshell in both proton and neutron number helps to understand the evolution of subshell gaps and large deformation in these nuclei. Purpose: We aim to improve the understanding of the nuclear structure of 160 Gd, specifically the K π = 4 + bands, as well as study the β decay of 160 Eu into 160 Gd. Methods: High-statistics decay spectroscopy of 160 Gd resulting from the β-decay of 160 Eu was collected using the GRIFFIN spectrometer at the TRIUMF-ISAC facility. Results: Two new excited states and ten new transitions were observed in 160 Gd. The β-decaying half-lives of the low- and high-spin isomers in 160 Eu were determined, and the low-spin state's half-life was measured to be t 1/2 = 26.0 (8) s, ≈ 16% shorter than previous measurements. Lifetimes of the two K π = 4 + bandheads in 160 Gd were measured for the first time, as well as γ – γ angular correlations and mixing ratios of intense transitions out of those bandheads. Conclusions: Lifetimes and mixing ratios suggest that the hexadecapole phonon model of the K π = 4 + bandheads in 160 Gd is preferred over a simple two-state strong mixing scenario, although further theoretical calculations are needed to fully understand these states. Additionally, the 1999.0-keV state in 160 Gd heavily populated in β decay is shown to have positive parity, which raises questions regarding the structure of the high-spin β-decaying state in 160 Eu.

150 ≤ A ≤ 189↗

Coulomb excitation of the | T z | = 1 2 , A = 23 mirror pair

Background: Electric-quadrupole ( E 2 ) strengths relate to the underlying quadrupole deformation of a nucleus and present a challenge for many nuclear theories. Additionally, mirror nuclei in the vicinity of the line of N = Z represent a convenient laboratory for testing deficiencies in such models, making use of the isospin symmetry of the systems. Purpose: Uncertainties associated with literature E 2 strengths in Mg 23 are some of the largest in T z = | 1 2 | nuclei in the s d shell. The purpose of the present paper is to improve the precision with which these values are known, to enable better comparison with theoretical models. Methods: Coulomb-excitation measurements of Mg 23 and Na 23 were performed at the TRIUMF-ISAC facility using the TIGRESS spectrometer. They were used to determine the E 2 matrix elements of mixed E 2 / M 1 transitions. Results: Reduced E 2 transition strengths, B ( E 2 ) , were extracted for Mg 23 and Na 23 . Their precision was improved by factors of approximately 6 for both isotopes, while agreeing within uncertainties with previous measurements. Conclusions: A comparison was made with both shell-model and ab initio valence-space in-medium similarity renormalization group calculations. Valence-space in-medium similarity renormalization group calculations were found to underpredict the absolute E 2 strength, in agreement with previous studies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Rydberg and autoionizing states of tellurium studied by laser resonance ionization spectroscopy

Multistep laser-resonance-ionization spectroscopy of tellurium (Te) has been performed at TRIUMF's off-line laser ion source test stand. Six clean and regular even-parity Rydberg series $5p^3$ ($^{4}S^0_{3/2}$) np $^{3}P_{ 0,1,2}$, n p $^{5}P_{1,2}$, and nf $^{3}F_{2}$/$^{5}P_{1,2}$ were observed. The ionization potential of Te was extracted from the measured series as 72669.110(44) stat (20) sys cm -1 . Excited from two different intermediate levels, seven odd-parity autoionization Rydberg series converging to the $5s^25p^3$ ($^{2}D^0_{3/2}$) core state of Te were obtained. Three of them are first time reported in the energy range of 92940 cm -1 .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Precision mass measurements of magnesium isotopes and implications for the validity of the isobaric mass multiplet equation

If the mass excess of neutron-deficient nuclei and their neutron-rich mirror partners are both known, it can be shown that deviations of the isobaric mass multiplet equation (IMME) in the form of a cubic term can be probed. Such a cubic term was probed by using the atomic mass of neutron-rich magnesium isotopes measured using the TITAN Penning trap and the recently measured proton-separation energies of 29 Cl and 30 Ar. The atomic mass of 27 Mg was found to be within 1.6σ of the value stated in the Atomic Mass Evaluation. The atomic masses of 28,29 Mg were measured to be both within 1σ, while being 7 and 33 times more precise, respectively. Using the 29 Mg mass excess and previous measurements of 29 Cl, we uncovered a cubic coefficient of d = 28(7)keV, which is the largest known cubic coefficient of the IMME. This departure, however, could also be caused by experimental data with unknown systematic errors. Hence there is a need to confirm the mass excess of 28 S and the one-neutron separation energy of 29 Cl, which have both come from a single measurement. Lastly, our results were compared with ab initio calculations from the valence-space in-medium similarity renormalization group, resulting in a good agreement.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Optimization of a hot-cavity type resonant ionization laser ion source

Resonant Ionization Laser Ion Source (RILIS) is nowadays an important technique in many Radioactive Ion Beam (RIB) facilities for its reliability and ability to ionize efficiently and element selectively. Grand Accélérateur National d’Ions Lourds (GANIL) Ion Source using Electron Laser Excitation (GISELE) is an off-line test bench for RILIS developed to study a fully operational resonant laser ion source at GANIL facility. The ion source body has been designed as a modular system to investigate different experimental approaches by varying the design parameters, to develop the future on-line laser ion source. The aim of this project is to determine the best technical solution which combines high selectivity and ionization efficiency with small ion beam emittance and stable long term operation. Latest results concerning emittance and time profile development as a function of the temperature for different ion source versions will be presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Ion source developments for the production of radioactive isotope beams at TRIUMF

At the ISAC facility at TRIUMF radioactive ions are produced by bombarding solid targets with up to 100 μA of 500 MeV protons. The reaction products have to diffuse out of the hot target into an ion source. Normally, singly charged ions are extracted. They can be transported either directly to experiments or via an ECR charge state breeder to a post accelerator. Several different types of ion sources have to be used in order to deliver a large variety of rare isotope beams. At ISAC those are surface ion sources, forced electron beam arc discharge (FEBIAD) ion sources and resonant laser ionization sources. Recent development activities concentrated on increasing the selectivity for the ionization to suppress isobaric contamination in the beam. Therefore, a surface ion rejecting resonant laser ionization source (SIRLIS) has been developed to suppress ions from surface ionization. For the FEBIAD ion source a cold transfer line has been introduced to prevent less volatile components from reaching the ion source.

43 PARTICLE ACCELERATORS↗

A test stand for off-line laser ion source development at TRIUMF

A test stand for ion source development and laser resonance ionization spectroscopy was built and commissioned at TRIUMF. The test stand is needed to develop efficient ion sources that can function reliably in the hostile, high temperature, high radiation environment of TRIUMF's isotope separator on-line (ISOL) production target ion source. In addition, it enables laser resonance ionization spectroscopy to develop laser excitation schemes suitable for the solid-state laser systems used with TRIUMF's resonant ionization laser ion source . Also, it allows for possible improvement of current ion sources and validation of new designs. The test stand employs a copy of the ion optics used on-line, so that results can be transferred directly to radioactive ion beam production. Due to space restrictions and the need for rapid mass scans, a quadrupole mass spectrometer is used as a mass separator. One of the first experiments conducted on the laser ion source test stand (LIS STAND) was resonant ionization spectroscopy of gallium to improve on the ionization scheme previously used on-line, so that low yield isotopes (e.g., {sup 62}Ga) become available for experiments. Different Rydberg series in gallium were observed and autoionizing states were searched for. The overall LIS STAND system performance, characteristics, and the first resonant ionization spectroscopy are described.

74 ATOMIC AND MOLECULAR PHYSICS↗

Ion production from solid state laser ion sources

Laser ion sources based on resonant excitation and ionization of atoms are well-established tools for selective and efficient production of radioactive ion beams. Recent developments are focused on the use of the state-of-the-art all solid-state laser systems. To date, 35 elements of the periodic table are available from laser ion sources based on tunable Ti:sapphire lasers. Recent progress in this field regarding the establishment of suitable optical excitation schemes for Ti:sapphire lasers are reported.

07 ISOTOPE AND RADIATION SOURCES↗

The selective and efficient laser ion source and trap project LIST for on-line production of exotic nuclides

Laser ion sources based on resonant excitation and ionization of atoms are well-established tools for selective and efficient production of radioactive ion beams. A recent trend is the complementary installation of reliable state-of-theart all solid-state Ti:Sapphire laser systems. To date, 35 elements of the Periodic Table are available at laser ion sources by using these novel laser systems, which complements the overall accessibility to 54 elements including use of traditional dye lasers. Recent progress in the field concerns the identification of suitable optical excitation schemes for Ti:Sapphire laser excitation as well as technical developments of the source in respect to geometry, cavity material as well as by incorporation of an ion guide system in the form of the laser ion source trap LIST.

43 PARTICLE ACCELERATORS↗

Laser Resonance Ionization Spectroscopy of the Lanthanides Tb, Dy and Ho as Homologues to Actinides and Super Heavy Elements

Spectroscopic investigations of the rare earth elements Tb, Dy and Ho have been carried out using laser resonance ionization mass spectroscopy. A variety of new intermediate energy levels and autoionizing states were observed in these elements. Efficient and selective excitation and ionization schemes for the elements have been developed for Ti:Sapphire lasers using the spectroscopic data. Resonant ionization schemes for Np were also been studied as the preparation work for related investigations on actinide elements and for the spectroscopy on the heaviest elements, where spectroscopic data so far are scarce or not existing at all.

74 ATOMIC AND MOLECULAR PHYSICS↗

Resonant Ionization Laser Ion Source for Radioactive Ion Beams

A resonant ionization laser ion source based on all-solid-state, tunable Ti:Sapphire lasers is being developed for the production of pure radioactive ion beams. It consists of a hot-cavity ion source and three pulsed Ti:Sapphire lasers operating at a 10 kHz pulse repetition rate. Spectroscopic studies are being conducted to develop ionization schemes that lead to ionizing an excited atom through an auto-ionization or a Rydberg state for numerous elements of interest. Three-photon resonant ionization of 12 elements has been recently demonstrated. The overall efficiency of the laser ion source measured for some of these elements ranges from 1 to 40%. The results indicate that Ti:Sapphire lasers could be well suited for laser ion source applications. The time structures of the ions produced by the pulsed lasers are investigated. The information may help to improve the laser ion source performance.

43 PARTICLE ACCELERATORS↗