Search NASA⌕ Search

Engineering topics

Latyshev, A. V.

Publications and source records attributed to Latyshev, A. V..

Electromigration Effect on Vacancy Islands Nucleation on Si(100) Surface during Sublimation

By means of in situ ultrahigh vacuum reflection electron microscopy, the nucleation of vacancy islands on wide terraces of the Si(100) surface is investigated. The temperature dependence of the displacement of a vacancy island nucleation center is determined in the process of heating a sample with a dc electric current. On the basis of a theoretical model, the effective electric charge of addimers is estimated in the direction across dimer rows of the surface. The effective charge has a positive sign and does not exceed 15 units of the elementary charge in the temperature range of 1020–1120°C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evolution of Micropits on Large Terraces of the Si(111) Surface during High-Temperature Annealing

The transformation of micropits on large terraces of the Si(111) surface containing no vicinal atomic steps has been investigated by in situ ultrahigh-vacuum reflection electron microscopy upon thermal annealing of the substrate in the range of 1200–1400°C. A procedure for the formation of micropits on large terraces of the Si(111) surface with the application of focused-ion-beam (Ga{sup +}) technology has been proposed. It has been found that the micropit decay kinetics varies upon reaching the critical radius R{sub crit}, which is caused by the activation of nucleation of two-dimensional vacancy islands on the micropit bottom. A theoretical model describing variations in the lateral sizes of the micropit both before and after reaching R{sub crit} has been proposed. Based on analysis of the found temperature dependence of the nucleation frequencies of two-dimensional vacancy pits on the micropit bottom, the effective energy of nucleation of a vacancy island has been determined to be 4.1 ± 0.1 eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic Force Microscopy Local Oxidation of GeO Thin Films

Metastable germanium monoxide (GeO) thin-insulating films have been investigated as a new promising material for atomic force microscope (AFM) oxidation lithography. The kinetics of GeO layer oxidation performed in the tapping mode of AFM was found to have a logarithmic relationship to oxide height versus pulse duration. Effect of humidity on oxidation of germanium monoxide thin films was studied at relative humidity 40, 60, 80%. When local anodic oxidation of GeO layer was carried out by AFM operating in the contact mode in high voltage (≥9 V) regime and at high relative humidity (RH = 80%), the size and shape of fabricated oxide was changed drastically.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal Smoothing and Roughening of GaAs Surfaces: Experiment and Monte Carlo Simulation

GaAs thermal smoothing at temperatures T ≤ 650°C in the conditions close to equilibrium yields surfaces with atomically smooth terraces separated by steps of monatomic height. At higher temperatures surface smoothing is changed to roughening. Possible reasons of surface roughening at elevated temperatures are studied by means of Monte Carlo simulation and compared with the experimental results on GaAs. It is proved that GaAs roughening at elevated temperatures is caused by kinetic instabilities due to deviations from equilibrium towards growth or sublimation. The microscopic mechanisms of kinetic-driven roughening are discussed.

36 MATERIALS SCIENCE↗

Local Anodic Oxidation of Thin GeO Films and Formation of Nanostructures Based on Them

The process of local anodic oxidation of thin GeO films has been studied using an atomic force microscope. The electron-probe microanalysis showed that oxidized areas of a GeO film were germanium dioxide. The effect of the voltage pulse duration applied to the probe–substrate system and the atmospheric humidity on the height of the oxide structures has been studied. The kinetics of the local anodic oxidation (LAO) in a semi-contact mode obeys the Cabrera–Mott model for large times. The initial growth rate of the oxide (R{sub 0}) significantly increases and the time of starting the oxidation (t{sub 0}) decreases as the atmospheric humidity increases by 20%, which is related to an increase in the concentration of oxygen-containing ions at the surface of the oxidized GeO film. It was shown that nanostructures in thin GeO layers can be formed by the LAO method.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Reversible electrochemical modification of the surface of a semiconductor by an atomic-force microscope probe

A technique for reversible surface modification with an atomic-force-microscope (AFM) probe is suggested. In this method, no significant mechanical or topographic changes occur upon a local variation in the surface potential of a sample under the AFM probe. The method allows a controlled relative change in the ohmic resistance of a channel in a Hall bridge within the range 20–25%.

36 MATERIALS SCIENCE↗

Nucleation of two-dimensional islands on Si (111) during high-temperature epitaxial growth

The process of two-dimensional island nucleation at the surface of ultra large Si (111) during hightemperature epitaxial growth is studied by in situ ultrahigh-vacuum reflection electron microscopy. The critical terrace size D{sub crit}, at which a two-dimensional island is nucleated in the center, is measured in the temperature range 900–1180°C at different silicon fluxes onto the surface. It is found that the parameter D{sub crit}{sup 2} is a power function of the frequency of island nucleation, with the exponent χ = 0.9 ± 0.05 in the entire temperature range under study. It is established that the kinetics of nucleus formation is defined by the diffusion of adsorbed silicon atoms at temperatures of up to 1180°C and the minimum critical nucleus size corresponds to 12 silicon atoms.

36 MATERIALS SCIENCE↗

Indium nanowires at the silicon surface

Conductive indium nanowires up to 50 nm in width and up to 10 μm in length are fabricated on the surface of silicon by local resputtering from the probe of an atomic-force microscope. The transfer of indium from the probe of the atomic-force microscope onto the silicon surface is initiated by applying a potential between the probe and the surface as they approach each other to spacings, at which the mutual repulsive force is ~10{sup –7} N. The conductivity of the nanowires ranges from 7 × 10{sup –3} to 4 × 10{sup –2} Ω cm, which is several orders of magnitude lower than that in the case of the alternative technique of heat transfer.

36 MATERIALS SCIENCE↗

Atomic steps on an ultraflat Si(111) surface upon sublimation

The kinetics of atomic steps on an ultraflat Si(111) surface is studied by in situ ultrahigh-vacuum reflection electron microscopy at temperatures of 1050–1350°C. For the first time it is experimentally shown that the rate of displacement of an atomic step during sublimation nonlinearly depends on the width of the adjacent terrace. It is established that the atomic mechanism of mass-transport processes at the surface at temperatures higher than 1200°C is controlled by nucleation and the diffusion of surface vacancies rather than of adsorbed Si atoms. The studies make it possible to estimate the activation energy of the dissolution of vacancies from the surface into the bulk of Si. The estimated activation energy is (4.3 ± 0.05) eV.

36 MATERIALS SCIENCE↗

Microwave-induced zero-resistance state in two-dimensional electron systems with unidirectional periodic modulation

In this study we fabricated lateral superlattices (LSLs) based on the selectively doped GaAs/AlAs heterostructures with a high-mobility two-dimensional (2D) electron gas. The LSLs were formed using the electron-beam lithography and lift-off techniques, which produced a set of metallic strips on top of a heterojunction. The amplitude of the 2D electron gas modulation in the LSL was controlled by the gate voltage applied to the metallic strips. The LSLs with two different periods (a = 200 nm and 500 nm) were used to investigate the influence of microwave radiation with the frequency of 110–150 GHz on the 2D electron transport at the temperature T = 1.6 K in the magnetic field B < 1 T. We have found that zero-resistance states (ZRSs) appear under the microwave radiation in the 2D systems with a unidirectional periodic modulation. These ZRSs are located at the minima of commensurability oscillations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical and electrical properties of silicon nanopillars

The electrical and optical properties of silicon nanopillars (Si NPs) are studied. Electron-beam lithography and reactive ion etching are used for the formation of ordered Si-NP arrays. The Si NPs with a diameter from 60 to 340 nm and a height from 218 to 685 nm are formed. The Si NPs are coated with a TiON{sup x} layer with a thickness of 8 nm for chemical and electrical passivation of the surface. Scanning electron microscopy and atomic-force microscopy are used to characterize the obtained structures. The Si-NP arrays acquire various colors when exposed to “bright-field” illumination. The spectra of reflection from the Si-NP arrays in the wavelength range 500–1150 nm are obtained.

36 MATERIALS SCIENCE↗

Analysis of optical and magnetooptical spectra of Fe{sub 5}Si{sub 3} and Fe{sub 3}Si magnetic silicides using spectral magnetoellipsometry

The optical, magnetooptical, and magnetic properties of polycrystalline (Fe{sub 5}Si{sub 3}/SiO{sub 2}/Si(100)) and epitaxial Fe{sub 3}Si/Si(111) films are investigated by spectral magnetoellipsometry. The dispersion of the complex refractive index of Fe{sub 5}Si{sub 3} is measured using multiangle spectral ellipsometry in the range of 250–1000 nm. The dispersion of complex Voigt magnetooptical parameters Q is determined for Fe{sub 5}Si{sub 3} and Fe{sub 3}Si in the range of 1.6–4.9 eV. The spectral dependence of magnetic circular dichroism for both silicides has revealed a series of resonance peaks. The energies of the detected peaks correspond to interband electron transitions for spin-polarized densities of electron states (DOS) calculated from first principles for bulk Fe{sub 5}Si{sub 3} and Fe{sub 3}Si crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗