Search NASA⌕ Search

Engineering topics

Leatherwood, J. D.

Publications and source records attributed to Leatherwood, J. D..

51 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Psychophysical relationships characterizing human response to whole-body sinusoidal vertical vibration

An experimental investigation determined that the psychophysical relationships between subjective discomfort evaluations to vibratory stimuli and subjective evaluations of the intensity of vibratory stimuli can be expressed in a linear fashion. Furthermore, significant differences were found to exist between discomfort and intensity subjective response for several but not all discrete frequencies investigated. The implication of these results is that ride quality criteria based upon subjective evaluation of vibration intensity should be applied cautiously in the development of criteria for human comfort.

Leatherwood, J. D.↗
NASA NTRS1976

Passenger ride quality within a noise and vibration environment

The subjective response to noise and vibration stimuli was studied in a ride quality simulator to determine their importance in the prediction of passenger ride quality. Subjects used category scales to rate noise discomfort, vibration discomfort, both noise and vibration discomfort, and overall discomfort in an effort to evaluate parametric arrangements of noise and vibration. The noise stimuli were composed of octave frequency bands centered at 125, 250, 2,000 and 4,000 Hz, each presented at 70, 75, 80, and 85 dB(A). The vertical vibration stimuli were 5 Hz bandwidth random vibrations centered at 3, 5, 7, and 9 Hz, each presented at 0.03, 0.06, 0.09, and 0.12 grms. Analyses were directed at (1) a determination of the subject's ability to separate noise and vibration as contributors to discomfort, (2) an assessment of the physical characteristics of noise and vibration that are needed for prediction of ride quality in this type of multifactor environment, and (3) an evaluation of the relative contribution of noise and vibration to passenger ride quality.

Dempsey, T. K.↗
NASA NTRS1976

A model for prediction of ride quality in a multifactor environment

Recently a ride quality comfort model has been proposed which accounts for the effect of both multifrequency and multiaxes vibratory inputs, as well as nonvibratory inputs such as noise, on human comfort response. The proposed NASA ride quality model is described in general terms and selected results of several experimental investigations are presented that have contributed to the development of the model and to a more comprehensive understanding of human comfort response to vibration. Human subjective response to vertical vibration, combined vertical-lateral vibrations, and roll vibrations are discussed, and a set of vertical discomfort curves is presented.

Leatherwood, J. D.↗
NASA NTRS1976

Vibration ride comfort criteria

Results are presented for an experimental study directed to derive equal vibration discomfort curves, to determine the influence of vibration masking in order to account for the total discomfort of any random vibration, and to develop a scale of total vibration discomfort in the case of human response to whole-body vertical vibration. Discomfort is referred to as a subjective discomfort associated with the acceleration level of a particular frequency band. It is shown that passenger discomfort to whole-body vibration increases linearly with acceleration level for each frequency. Empirical data provide a mechanism for determining the degree of masking (or summation) of the discomfort of multiple frequency vibration. A scale for the prediction of passenger discomfort is developed.

Dempsey, T. K.↗
NASA NTRS1975

Experimental studies for determining human discomfort response to vertical sinusoidal vibration

A study was conducted to investigate several problems related to methodology and design of experiments to obtain human comfort response to vertical sinusoidal vibration. Specifically, the studies were directed to the determination of (1) the adequacy of frequency averaging of vibration data to obtain discomfort predictors, (2) the effect of practice on subject ratings, (3) the effect of the demographic factors of age, sex, and weight, and (4) the relative importance of seat and floor vibrations in the determination of measurement and criteria specification location. Results indicate that accurate prediction of discomfort requires knowledge of both the acceleration level and frequency content of the vibration stimuli. More importantly, the prediction of discomfort was shown to be equally good based upon either floor accelerations or seat accelerations. Furthermore, it was demonstrated that the discomfort levels in different seats resulting from similar vibratory imputs were equal. Therefore, it was recommended that criteria specifications and acceleration measurements be made at the floor location. The results also indicated that practice did not systematically influence discomfort responses nor did the demographic factors of age, weight, and sex contribute to the discomfort response variation.

Dempsey, T. K.↗
NASA NTRS1975

Effect of vibration in combined axes on subjective evaluation of ride quality

The effects of simultaneous sinusoidal vibration in the vertical and lateral axes on ratings of discomfort were investigated. The first experiment concentrated on the effects of variation of frequency in the two axes, and the second study concentrated on the effects of amplitude variation in the two axes.

Kirby, R. H.↗
NASA NTRS1975

Vibration simulator studies for the development of passenger ride comfort criteria

A test program to determine the total discomfort associated with vehicle vibration is described. The program utilizes a three-degree-of-freedom vibration simulator to determine the effects of multifrequency and multiaxis vibration inputs. The approach to multifrequency vibration includes a separate consideration of the discomfort associated with each frequency component or band of the total spectrum and a subsequent empirical weighting of the discomfort components of these frequency bands when in various random combinations. The results are in the form of equal discomfort curves that specify the discomfort associated with discrete frequencies between 1 and 30 Hz and different acceleration levels. These results provide detailed information of the human discomfort response to increases in acceleration level for each frequency investigated. More importantly, the results provide a method for adding the discomfort associated with separate frequencies to give a total typification of the discomfort of a random spectrum of vibration.

Dempsey, T. K.↗
NASA NTRS1975

Vibrations transmitted to human subjects through passenger seats and considerations of passenger comfort

An experimental study was conducted to determine the vertical and lateral vibration-transmission characteristics of several types of transport vehicle seats (two aircraft and one bus) to obtain preliminary estimates and comparisons of the ride acceptability of the various seat types. Results of this investigation indicate that from the standpoint of human comfort the seats exhibit undesirable dynamic response characteristics. Amplification of floor vibrations occurred at the frequencies known to be most critical for human comfort in both vertical and lateral axes. An average transmissibility function for aircraft seats was tabulated together with the associated variability for use by designers who incorporate similar types of seats in their vehicles. The acceptability of vibrations resulting from floor inputs of 0.10g and 0.15g was low over a broad range of frequencies for both axes and all seat types, and was especially low at frequencies where the input was being amplified.

Leatherwood, J. D.↗
NASA NTRS1972

Analog analysis of a tracked air-cushion vehicle.

The dynamics of tracked air-cushion vehicles considered for high-speed ground transportation systems are examined using a vehicle model represented by a one-degree-of-freedom system. The respective equations of motion are derived, and the control system is discussed. The equations obtained for the cushion are solved using an analog computer. The computer showed the effect of the control technique on the relative motion between vehicle and guideway.

Leatherwood, J. D.↗
NASA NTRS1968

Improved active vibration isolator

Active vibration isolator simultaneously isolates a flexible structure or payload from disturbances, attenuates the response of a flexible structure to transient disturbances, and maintains the equilibrium position of the payload within predetermined limits over a wide range of steady loads and accelerators.

Dixon, G. V.↗