Search NASA⌕ Search

Engineering topics

Lebedev, Oleg I.

Publications and source records attributed to Lebedev, Oleg I..

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

When van der Waals Met Kagome: A 2D Antimonide with a Vanadium-Kagome Network

2D materials showcase unconventional properties emerging from quantum confinement effects. In this work, a “soft chemical” route allows for the deintercalation of K + from the layered antimonide KV 6 Sb 6 , resulting in the discovery of a new metastable 2D-Kagome antimonide K 0.1(1) V 6 Sb 6 with a van der Waals gap of 3.2 Å. The structure of K 0.1(1) V 6 Sb 6 was determined via the synergistic techniques, including X-ray pair distribution function analysis, advanced transmission electron microscopy, and density functional theory calculations. The K 0.1(1) V 6 Sb 6 compound crystallizes in the monoclinic space group C2/m (a = 9.57(2) Å, b = 5.502(8) Å, c = 10.23(2) Å, β = 97.6(2)°, Z = 2). The [V 6 Sb 6 ] layers in K 0.1(1) V 6 Sb 6 are retained upon deintercalation and closely resemble the layers in the parent compound, yet deintercalation results in a relative shift of the adjacent [V 6 Sb 6 ] layers. The magnetic properties of the K 0.1(1) V 6 Sb 6 phase in the 2–300 K range are comparable to those of KV 6 Sb 6 and another Kagome antimonide KV 3 Sb 5 , consistent with nearly temperature-independent paramagnetism. Electronic band structure calculation suggests a nontrivial band topology with flat bands and opening of band crossing afforded by deintercalation. Transport property measurements reveal a metallic nature for K 0.1(1) V 6 Sb 6 and a low thermal conductivity of 0.6 W K –1 m –1 at 300 K. Additionally, ion exchange in KV 6 Sb 6 via a solvothermal route leads to a successful partial exchange of K + with A + (A = Na, Rb, and Cs). Here, this study highlights the tunability of the layered structure of the KV 6 Sb 6 compound, providing a rich playground for the realization of new 2D materials.

2D↗
DOE OSTI2024

A Recipe for a Great Meal: A Benchtop Route from Elemental Se to Superior Thermoelectric β-Ag 2 Se

The low-temperature modification of β-Ag 2 Se has proven to be useful as a near-room-temperature thermoelectric material. Over the past years, research has been devoted to interstitial, vacancy, and substitutional doping into the parent β-Ag 2 Se structure, aiming at tuning the material’s charge and heat transport properties to enhance thermoelectric performance. The transformation of β-Ag 2 Se into α-Ag 2 Se at ~134 °C and the low solubility of dopants are the main obstacles for the doping approach. Herein, we report a facile, safe, scalable, and cost-effective benchtop approach to successfully produce metal-doped β-Ag 2 Se. The doped materials display a remarkable enhancement of thermoelectric performance with a record-high peak zT of 1.30 at 120 °C and an average zT of ~1.15 in the 25–120 °C range for 0.2 at. % Zn-doped Ag 2 Se. The enhancement in zT is attributed to point defects created by Zn doping into Ag vacancies/interstitials, which enhances the scattering of phonons and tunes the charge carrier properties, leading to the significant suppression of thermal conductivity. In conclusion, the simplicity of the synthetic method developed herein and the high performance of the final products provide an avenue to produce high-quality Ag 2 Se-based thermoelectric materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Make Selenium Reactive Again: Activating Elemental Selenium for Synthesis of Metal Selenides Ranging from Nanocrystals to Large Single Crystals

The inertness of elemental selenium is a significant obstacle in the synthesis of selenium-containing materials at low reaction temperatures. Over the years, several recipes have been developed to overcome this hurdle; however, most of the methods are associated with the use of highly toxic, expensive, and environmentally harmful reagents. As such, there is an increasing demand for the design of cheap, stable, and nontoxic reactive selenium precursors usable in the low-temperature synthesis of transition metal selenides with vast applications in nanotechnology, thermoelectrics, and superconductors. Herein, a novel synthetic route has been developed for activating elemental selenium by using a solvothermal approach. By comprehensive 77 Se NMR, Raman, and infrared spectroscopies and gas chromatography–mass spectrometry, we show that the activated Se solution contained HSe – , [Se–Se] 2– , and Se 2– ions, as well as dialkyl selenide (R 2 Se) and dialkyl diselenide (R–Se–Se–R) species in dynamic equilibrium. This also corresponded to the first observation of naked Se 2 2– in solution. The versatility of the developed Se precursor was demonstrated by the successful synthesis of (i) the polycrystalline room-temperature modification of the β-Ag 2 Se thermoelectric material; (ii) large single crystals of superconducting β-FeSe; (iii) CdSe nanocrystals with different particle sizes (3–10 nm); (iv) nanosheets of PtSe 2 ; and (v) mono- and dibenzyl selenides and diselenides at room temperature. In conclusion, The simplicity and diversity of the developed Se activation method holds promise for applied and fundamental research.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Large-scale synthesis of metal/nitrogen Co-doped carbon catalysts for CO 2 electroreduction

In this work, we report a facile approach for synthesizing M–N–C catalysts (M = Co, Fe, Ni) at a commercial scale without employing organic solvents. Our characterization efforts indicate that single atomic catalysts with high surface areas were successfully obtained. Electrochemical measurements demonstrate that, among the three synthesized catalysts, Ni–N–C exhibits the highest performance in the electrochemical CO2 reduction reaction (CO 2 RR) to carbon monoxide (CO), affording 80% Faradaic efficiency (FE) of CO production at –0.49 V RHE with a turnover frequency (TOF) of 57,379 h –1 . Large-scale synthesis coupled with high performance allows moving forward with the practical implementation of M–N–C catalysts for industrially relevant CO 2 RR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Retrofitting of carbon-supported bimetallic Ni-based catalysts by phosphorization for hydrogen evolution reaction in acidic media

Commercial bimetallic Ni–Mo and Ni–Re electrocatalysts supported on advanced conductive carbon are high-performing materials for H 2 evolution reaction in alkaline medium, but they cannot be applied in acidic medium due to the rapid dissolution of metals. Here, in this work, we solve this issue by introducing a convenient phosphorization protocol to convert these commercial metallic electrocatalysts into the respective phosphides, rendering them stable under acidic conditions, and thus providing a pathway to electrocatalysts for water reduction in acidic electrolyte. The novel materials demonstrate high performance, as reflected by the measured low overpotentials, shallow Tafel slopes, fast kinetics, as well as excellent stability and durability. This work opens the possibility to expand the applicability of commercial supported metallic catalysts and electrocatalysts through retrofitting via phosphorization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

High Seebeck Coefficient from Screen-Printed Colloidal PbSe Nanocrystals Thin Film

Thin-film thermoelectrics (TEs) with a thickness of a few microns present an attractive opportunity to power the internet of things (IoT). Here, we propose screen printing as an industry-relevant technology to fabricate TE thin films from colloidal PbSe quantum dots (QDs). Monodisperse 13 nm-sized PbSe QDs with spherical morphology were synthesized through a straightforward heating-up method. The cubic-phase PbSe QDs with homogeneous chemical composition allowed the formulation of a novel ink to fabricate 2 μm-thick thin films through robust screen printing followed by rapid annealing. A maximum Seebeck coefficient of 561 μV K -1 was obtained at 143 °C and the highest electrical conductivity of 123 S m -1 was reached at 197 °C. Power factor calculations resulted in a maximum value of 2.47 × 10 -5 W m -1 K -2 at 143 °C. To the best of our knowledge, the observed Seebeck coefficient value is the highest reported for TE thin films fabricated by screen printing. Thus, this study highlights that increased Seebeck coefficients can be obtained by using QD building blocks owing to quantum confinement.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Pseudo-Polymorphism in Layered FeS Intercalates: A Competition between Charged and Neutral Guest Species

Systematic synthesis studies of the formation of tetrahedral FeS-ethylenediamine intercalates resulted in the synthesis of a new compound, [Fe 9.4(2) S 10 ][Fe(en) 3 ] 0.6(1) ·en 0.9 ( 3 ). The composition and complex crystal structure were determined based on a synergistic combination of elemental composition, decomposition behavior, high-resolution synchrotron X-ray diffraction and total scattering, 57 Fe Mössbauer spectroscopy, and electron diffraction. The structural model was derived based on a systematic comparison to the previously reported structures [Fe 8 S 10 ][Fe(en) 3 ] 1 ·en 0.5 and tetragonal FeS. The new compound has flat Fe 9.4 S 10 layers, analogous to those in superconducting binary FeS. In the crystal structure of [Fe 9.4 S 10 ][Fe(en) 3 ] 0.6 ·en 0.9 , the interlayer space is occupied by [Fe(en) 3 ] 2+ complexes and neutral ethylenediamine molecules in a ~2:3 ratio. Interlayer species are not randomly oriented but ordered as evidenced by superstructural diffraction peaks in both high-resolution X-ray diffraction and electron diffraction patterns. Magnetic studies reveal no superconducting transition down to 2 K, indicating that the presence of minute amounts (~6%) of iron vacancies at the Fe-S layer in [Fe 9.4 S 10 ][Fe(en) 3 ] 0.6 ·en 0.9 is still sufficient to shift the position of the Fermi level resulting in an adjustment of the properties. Here, our work shows the importance of detailed characterization of the crystal structure of intercalated compounds to understand the origin of the observed properties and develop proper structure–property relationships.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

First demonstration of tuning between the Kitaev and Ising limits in a honeycomb lattice

Recent observations of novel spin-orbit coupled states have generated interest in 4d/5d transition metal systems. A prime example is the J eff = $\frac{1}{2}$ state in iridate materials and α-RuCl 3 that drives Kitaev interactions. Here, by tuning the competition between spin-orbit interaction (λ SOC ) and trigonal crystal field (Δ T ), we restructure the spin-orbital wave functions into a previously unobserved μ = $\frac{1}{2}$ state that drives Ising interactions. This is done via a topochemical reaction that converts Li 2 RhO 3 to Ag 3 LiRh 2 O 6 . Using perturbation theory, we present an explicit expression for the μ = $\frac{1}{2}$ state in the limit Δ T ≫ λ SOC realized in Ag 3 LiRh 2 O 6 , different from the conventional J eff = $\frac{1}{2}$ state in the limit λ SOC ≫ Δ T realized in Li 2 RhO 3 . The change of ground state is followed by a marked change of magnetism from a 6 K spin-glass in Li 2 RhO 3 to a 94 K antiferromagnet in Ag 3 LiRh 2 O 6 .

36 MATERIALS SCIENCE↗
DOE OSTI2022

Microwave-Assisted Solution Synthesis of Metastable Intergrowth of AgInS2 Polymorphs

The intergrowth of stable and metastable AgInS2 polymorphs was synthesized using a microwave-assisted synthesis. The samples were synthesized in water and in a deep eutectic solvent (DES) consisting of choline chloride and thiourea. An increase in the metal precursor concentration improved the crystallinity of the synthesized samples and affected the particle size. AgInS2 cannot be synthesized from crystalline binary Ag2S or In2S3 via this route. The solution synthesis reported here results in the intergrowth of the thermodynamically stable polymorph (space group I4¯2d, chalcopyrite structure) and the high-temperature polymorph (space group Pna21, wurtzite-like structure) that is metastable at room temperature. A scanning transmission microscopy (STEM) study revealed the intergrowth of tetragonal and orthorhombic polymorphs in a single particle and unambiguously established that the long-thought hexagonal wurtzite polymorph has pseudo-hexagonal symmetry and is best described with the orthorhombic unit cell. The solution-synthesized AgInS2 polymorphs intergrowth has slightly lower bandgap values in the range of 1.73 eV–1.91 eV compared to the previously reported values for tetragonal I4¯2d (1.86 eV) and orthorhombic Pna21 (1.98 eV) polymorphs.

Adeyemi, Adedoyin N. (ORCID:0000000340096150)↗
DOE OSTI2022

3D LiMn 2 O 4 nThin Film Deposited by ALD: A Road toward High-Capacity Electrode for 3D Li-Ion Microbatteries

Miniaturized electronics suffer from a lack of energy autonomy. In that context, the fabrication of lithium-ion solid-state microbatteries with high performance is mandatory for powering the next generation of portable electronic devices. Here, the fabrication of a thin film positive electrode for 3D Li-ion microbatteries made by the atomic layer deposition (ALD) method and in situ lithiation step is demonstrated. The 3D electrodes based on spinel LiMn 2 O 4 films operate at high working potential (4.1 V vs Li/Li + ) and are capable of delivering a remarkable surface capacity (approximate to 180 mu Ah cm -2 ) at low C-rate while maintaining more than 40 mu Ah cm -2 at C/2 (time constant = 2 h). Both the thickness of the electrode material and the 3D gain of the template are carefully tuned to maximize the electrode performance. Further, advanced characterization techniques such as transmission electron and X-ray transmission microscopies are proposed as perfect tools to study the conformality of the deposited films and the interfaces between each layer: no interdiffusion or segregation are observed. This work represents a major issue towards the fabrication of 3D-lithiated electrode by ALD-without any prelithiation step by electrochemical technique-making it an attractive solution for the fabrication of 3D Li-ion solid-state microbatteries with semiconductor processing methods.

3D Li-ion micro-batteries↗
DOE OSTI2021

New Opportunity for Carbon-Supported Ni-based Electrocatalysts: Gas-Phase CO 2 Methanation

The cost-effectiveness and excellent performance of conductive-carbon-supported Ni-based electrocatalysts make them attractive materials for hydrogen oxidation and evolution reactions. However, they were previously unused in gas-phase hydrogenation reactions. In this work, we have expanded the applicability of commercially available advanced Ni/C, NiMo/C and NiRe/C materials from electrocatalysis to heterogeneous catalysis of CO 2 methanation. Our catalytic testing efforts indicate that the monometallic Ni/C material demonstrates the best CO 2 methanation properties, achieving an excellent CO 2 conversion of 83 % at 400 °C with nearly complete selectivity to CH 4 of 99.7 %, plus exhibiting intact performance during 90 h of time-on-stream testing. Such catalytic properties are among the highest reported to date among carbon-supported Ni-based methanation catalysts. Finally, excellent performance of Ni/C stems from the good dispersion of the Ni nanoparticles over N-containing carbon support material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Unraveling the Origin of Photocatalytic Deactivation in CeO 2 /Nb 2 O 5 Heterostructure Systems during Methanol Oxidation: Insight into the Role of Cerium Species

The study provides deep insight into the origin of photocatalytic deactivation of Nb 2 O 5 after modification with ceria. Of particular interest was to fully understand the role of ceria species in diminishing the photocatalytic performance of CeO 2 /Nb 2 O 5 heterostructures. For this purpose, ceria was loaded on niobia surfaces by wet impregnation. The as-prepared materials were characterized by powder X-ray diffraction, nitrogen physisorption, UV-visible spectroscopy, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy, and photoluminescence measurements. Photocatalytic activity of parent metal oxides (i.e., Nb 2 O 5 and CeO 2 ) and as-prepared CeO 2 / Nb 2 O 5 heterostructures with different ceria loadings were tested in methanol photooxidation, a model gas-phase reaction. Deep insight into the photocatalytic process provided by operando-IR techniques combined with results of photoluminescence studies revealed that deactivation of CeO 2 /Nb 2 O 5 heterostructures resulted from increased recombination of photo-excited electrons and holes. The main factor contributing to more efficient recombination of the charge carriers in the heterostructures was the ultrafine size of the ceria species. The presence of such highly dispersed ceria species on the niobia surface provided a strong interface between these two semiconductors, enabling efficient charge transfer from Nb 2 O 5 to CeO 2 . However, the ceria species supported on niobia exhibited a high defect site concentration, which acted as highly active recombination centers for the photo-induced charge carriers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Impact of Solution Chemistry on Growth and Structural Features of Mo-Substituted Spinel Iron Oxides

The effect of crystallizing solution chemistry on the chemistry of subsequently as-grown materials was investigated for Mo-substituted iron oxides prepared by thermally activated co-precipitation. In the presence of Mo ions, we find that varying the oxidation state of the iron precursor from Fe(II) to Fe(III) causes a progressive loss of atomic long-range order with the stabilization of 2-4 nm particles for the sample prepared with Fe(III). The oxidation state of the Fe precursor also affects the distribution of Fe and Mo cations within the spinel structure. Increasing the Fe precursor oxidation state gives decreased Fe-ion occupation and increased Mo-ion occupation of tetrahedral sites, as revealed by the extended X-ray absorption fine structure. The stabilization of Mo within tetrahedral sites appears to be unexpected, considering the octahedral preferred coordination number of Mo(VI). The analysis of the atomic structure of the sample prepared with Fe(III) indicates a local ordering of vacancies and that the occupation of tetrahedral sites by Mo induces a contraction of the interatomic distances within the polyhedra as compared to Fe atoms. Moreover, the occupancy of Mo into the thermodynamic site preference of a Mo dopant in Fe 2 O 3 assessed by density functional theory calculations points to a stronger preference for Mo substitution at octahedral sites. Hence, we suggest that the synthetized compound is thermodynamically metastable, that is, kinetically trapped. Such a state is suggested to be a consequence of the tetrahedral site occupation by Mo ions. The population of these sites, known to be reactive sites enabling particle growth, is concomitant with the stabilization of very small particles. Furthermore, we confirmed our hypothesis by using a blank experiment without Mo ions, further supporting the impact of tetrahedral Mo ions on the growth of iron oxide nanoparticles. Our findings provide new insights into the relationships between the Fechemistry of the crystallizing solution and the structural features of the as-grown Mo-substituted Fe-oxide materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Clathrate XI K 58 Zn 122 Sb 207 : A New Branch on the Clathrate Family Tree

Abstract The compositional screening of K‐Zn‐Sb ternary system aided by machine learning, rapid exploratory synthesis using KH salt‐like precursor and in situ powder X‐ray diffraction yielded a novel clathrate type XI K 58 Zn 122 Sb 207 . This clathrate consists of a 3D Zn‐Sb framework hosting K + ions inside polyhedral cages, some of which are reminiscent of known clathrate types while others are unique to this structure type. The complex non‐centrosymmetric structure in the tetragonal space group was solved by means of single crystal X‐ray diffraction as a 6‐component twin due to pseudocubic symmetry and further confirmed by high‐resolution synchrotron powder X‐ray diffraction and state‐of‐the‐art scanning transmission electron microscopy. The electron‐precise composition of this clathrate yields narrow‐gap p ‐type semiconductor with extraordinarily low thermal conductivity due to displacement or “rattling” of K cations inside oversized cages and as well as to twinning, stacking faults and antiphase boundary defects.

Cox, Tori↗