Search NASA⌕ Search

Engineering topics

Lee, Dooyong

Publications and source records attributed to Lee, Dooyong.

Anomalous frequency and temperature dependent scattering in the dilute metallic phase in lightly doped-SrTiO 3

The mechanism of superconductivity in materials with aborted ferroelectricity and its emergence out of a dilute metallic phase in systems like doped-SrTiO 3 is an outstanding issue in condensed matter physics. This dilute metal has anomalous properties that are both similar and different to those found in the normal state of other unconventional superconductors. For instance, T 2 resistivity can be found at densities that are too small to allow current decay through electronelectron scattering. We have investigated the optical properties of the dilute metallic phase in doped-SrTiO 3 using THz time-domain spectroscopy. At low frequencies the THz response exhibits a Drude-like form as expected for typical metal-like conductivity. We observed the frequency and temperature dependencies to the low energy scattering rate Γ(ω, T) ∝ (¯hω) 2 + (pπk B T) 2 expected in a conventional Fermi liquid. However we find the lowest known p values of 0.39-0.72. As p is 2 in a canonical Fermi liquid and existing models based on energy dependent elastic scattering bound p from below to 1, our observation lies outside current explanation. Our data also gives insight into the high temperature regime and shows that the temperature dependence of the resistivity derives in part from strong T dependent mass renormalizations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Engineering metal oxidation using epitaxial strain

The oxides of platinum group metals are promising for future electronics and spintronics due to the delicate interplay of spin-orbit coupling and electron correlation energies. However, their synthesis as thin films remains challenging due to their low vapour pressures and low oxidation potentials. Here we show how epitaxial strain can be used as a control knob to enhance metal oxidation. Using Ir as an example, we demonstrate the use of epitaxial strain in engineering its oxidation chemistry, enabling phase-pure Ir or IrO 2 films despite using identical growth conditions. The observations are explained using a density-functional-theory-based modified formation enthalpy framework, which highlights the important role of metal-substrate epitaxial strain in governing the oxide formation enthalpy. We also validate the generality of this principle by demonstrating epitaxial strain effect on Ru oxidation. The IrO 2 films studied in our work further revealed quantum oscillations, attesting to the excellent film quality. The epitaxial strain approach we present could enable growth of oxide films of hard-to-oxidize elements using strain engineering.

36 MATERIALS SCIENCE↗

Transient electron scavengers modulate carrier density at a polar/nonpolar perovskite oxide heterojunction

Here, we show how transient electron scavengers can be utilized to control the carrier concentration at polar/non-polar perovskite interfaces. By combining quantitative synchrotron x-ray-based interface structure determination with ab initio modeling, we demonstrate that Nd vacancy formation and the resulting formation of Nd adatoms, stabilized by oxygen scavengers at the growth front, can quantitatively account for the decreased carrier concentration at the SrTiO 3 /n NdTiO 3 /SrTiO 3 (001) heterojunction for n = 1 unit cell. This study yields new insights into growth mechanisms and the effect of transient species and defects on the electronic properties of oxide heterojunctions.

36 MATERIALS SCIENCE↗

Hybrid molecular beam epitaxy of germanium-based oxides

Abstract Germanium-based oxides such as rutile GeO 2 are garnering attention owing to their wide band gaps and the prospects of ambipolar doping for application in high-power devices. Here, we present the use of germanium tetraisopropoxide (GTIP), a metal-organic chemical precursor, as a source of germanium for the demonstration of hybrid molecular beam epitaxy for germanium-containing compounds. We use Sn 1- x Ge x O 2 and SrSn 1- x Ge x O 3 as model systems to demonstrate our synthesis method. A combination of high-resolution X-ray diffraction, scanning transmission electron microscopy, and X-ray photoelectron spectroscopy confirms the successful growth of epitaxial rutile Sn 1- x Ge x O 2 on TiO 2 (001) substrates up to x = 0.54 and coherent perovskite SrSn 1- x Ge x O 3 on GdScO 3 (110) substrates up to x = 0.16. Characterization and first-principles calculations corroborate that germanium occupies the tin site, as opposed to the strontium site. These findings confirm the viability of the GTIP precursor for the growth of germanium-containing oxides by hybrid molecular beam epitaxy, thus providing a promising route to high-quality perovskite germanate films.

36 MATERIALS SCIENCE↗

Semi-metallic SrIrO 3 films using solid-source metal-organic molecular beam epitaxy

Perovskite SrIrO 3 films and its heterostructures are very promising, yet less researched, avenues to explore interesting physics originating from the interplay between strong spin–orbit coupling and electron correlations. Elemental iridium is a commonly used source for molecular beam epitaxy (MBE) synthesis of SrIrO 3 films. However, elemental iridium is extremely difficult to oxidize and evaporate while maintaining an ultra-high vacuum and a long mean free path. Here, we calculated a thermodynamic phase diagram to highlight these synthesis challenges for phase-pure SrIrO 3 and other iridium-based oxides. We addressed these challenges using a novel solid-source metal-organic MBE approach that rests on the idea of modifying the metal-source chemistry. Phase-pure, single-crystalline, coherent, epitaxial (001) pc SrIrO 3 films on (001) SrTiO 3 substrate were grown. Films demonstrated semi-metallic behavior, Kondo scattering, and weak antilocalization. Our synthesis approach has the potential to facilitate research involving iridate heterostructures by enabling their atomically precise syntheses.

36 MATERIALS SCIENCE↗

Probing electronic dead layers in homoepitaxial n-SrTiO 3 (001) films

We combine state-of-the-art oxide epitaxial growth by hybrid molecular beam epitaxy with transport, x-ray photoemission, and surface diffraction, along with classical and first-principles quantum mechanical modeling to investigate the nuances of insulating layer formation in otherwise high-mobility homoepitaxial n-SrTiO 3 (001) films. Our analysis points to charge immobilization at the buried n-SrTiO 3 /undoped SrTiO 3 (001) interface as well as within the surface contamination layer resulting from air exposure as the drivers of electronic dead-layer formation. As Fermi level equilibration occurs at the surface and the buried interface, charge trapping reduces the sheet carrier density (n 2D ) and renders the n-STO film insulating if n 2D falls below the critical value for the metal-to-insulator transition.

36 MATERIALS SCIENCE↗

Epitaxial SrTiO 3 films with dielectric constants exceeding 25,000

Significance Semiconductor interfaces are among the most important in use in modern technology. The properties they exhibit can either enable or disable the characteristics of the materials they connect for functional performance. While much is known about important junctions involving conventional semiconductors such as Si and GaAs, there are several unsolved mysteries surrounding interfaces between oxide semiconductors. Here we resolve a long-standing issue concerning the measurement of anomalously low dielectric constants in SrTiO 3 films with record high electron mobilities. We show that the junction between doped and undoped SrTiO 3 required to make dielectric constant measurements masks the dielectric properties of the undoped film. Through modeling, we extract the latter and show that it is much higher than previously measured.

36 MATERIALS SCIENCE↗

Anomalous transport in high-mobility superconducting SrTiO 3 thin films

The study of subtle effects on transport in semiconductors requires high-quality epitaxial structures with low defect density. Using hybrid molecular beam epitaxy (MBE), SrTiO 3 films with a low-temperature mobility exceeding 42,000 cm 2 V -1 s -1 at a low carrier density of 3 × 10 17 cm -3 were achieved. A sudden and sharp decrease in residual resistivity accompanied by an enhancement in the superconducting transition temperature were observed across the second Lifshitz transition where the third band becomes occupied, revealing dominant intraband scattering. These films further revealed an anomalous behavior in the Hall carrier density as a consequence of the antiferrodistortive (AFD) transition and the temperature dependence of the Hall scattering factor. Using hybrid MBE growth, phenomenological modeling, temperature-dependent transport measurements, and scanning superconducting quantum interference device imaging, we provide critical insights into the important role of inter- versus intraband scattering and of AFD domain walls on normal-state and superconducting properties of SrTiO 3 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancing the local conductivity of Cu films using temperature-assisted agglomerated Cu nanostructures

We investigate the structural and electrical properties of Cu film and reveal their changes as a function of post-annealing temperature. Thermal annealing of a Cu film on a dielectric substrate can improve its crystallinity; however, high-temperature annealing also leads to a morphological transformation that hinders the precise measurement of electrical properties. The enhanced crystallinity of the Cu films is verified with x-ray diffraction as the annealing temperature increases. To examine the electrical properties of the Cu film after the dewetting processes, which promotes the formation of voids and agglomerations, we utilize both conventional micro four-point probe method as well as an advanced four-point probe scanning tunneling microscopy (4P-STM) technique to measure the conductance and evolution of the microscopic structural properties. We could eliminate a deceptive effect of voids with 4P-STM technique, and disclosed a significantly reduced resistivity (1.88 ± 0.07 µΩ∙cm) of Cu nanostructure after post-annealing at 700 °C. We unveiled impact of crystallinity and imperfections of Cu nanostructure, and discussed the critical role of the twin grain boundaries of single-crystalline Cu (1 1 1) on an Al 2 O 3 substrate. We anticipate that understanding the evolution of the structures and the enhanced electrical properties of the post-annealed Cu nanostructures would be important for nanoscale devices where Cu is used as an interconnecting material and could provide a new route to control the plasmonic applications.

36 MATERIALS SCIENCE↗