Search NASA⌕ Search

Engineering topics

Lee, J H

Publications and source records attributed to Lee, J H.

At least 19 records

Early Results from the Q{sub weak} Experiment

A subset of results from the recently completed Jefferson Lab Q{sub weak} experiment are reported. This experiment, sensitive to physics beyond the Standard Model, exploits the small parity-violating asymmetry in elastic {vector e}p scattering to provide the first determination of the protons weak charge Q{sub w}{sup p}. The experiment employed a 180 {micro}A longitudinally polarized 1.16 GeV electron beam on a 35 cm long liquid hydrogen target. Scattered electrons corresponding to Q{sup 2} of 0.025 GeV{sup 2} were detected in eight Cerenkov detectors arrayed symmetrically around the beam axis. The goals of the experiment were to provide a measure of Q{sub w}{sup p} to 4.2 percent (combined statistical and systematic error), which implies a measure of sin2(thetaw) at the level of 0.3 percent, and to help constrain the vector weak quark charges C{sub 1u} and C{sub 1d}. The experimental method is described, with particular focus on the challenges associated with the worlds highest power LH{sub 2} target. The new constraints on C{sub 1u} and C{sub 1d} provided by the subset of the experiments data analyzed to date will also be shown, together with the extracted weak charge of the neutron.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Study of proton resonance structure in {sup 27}P via resonant elastic scattering of {sup 26}Si+p

A measurement of resonant elastic scattering of {sup 26}Si+p was performed with a thick target using a {sup 26}Si radioactive ion beam at the CRIB (CNS Radioactive Ion Beam separator) of the Center for Nuclear Study (CNS), the University of Tokyo. The excitation function of {sup 27}P was measured successfully with the inverse kinematics method through a covered the range of excitation energies from E{sub x}{approx} 2.3 to 3.8 MeV, providing information about the resonance structure of this nucleus. The properties of these resonances are important to better determine the production rates of {sup 26}Si(p,g){sup 27}P reaction, which is one of the astrophysically important nuclear reactions to understand the production of the {sup 26}Al. Some new resonant states have been investigated, and determined their resonance parameters, such as excitation energies, proton partial widths, and spin-parities by R-matrix calculation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurement of {sup 25}Al+p resonant elastic scattering for studying the {sup 25}Al(p,{gamma}){sup 26}Si

Proton resonant states in {sup 26}Si have been studied by the resonant elastic scattering of {sup 25}Al+p with a {sup 25}Al radioactive ion beam at 2.863 MeV/nucleon bombarding a thick H{sub 2} gas target with the inverse kinematics method at the low-energy RI beam facility CRIB (CNS Radioactive Ion Beam separator), University of Tokyo. The properties of these resonance states are important to better determine the production rates of {sup 25}Al(p,{gamma}){sup 26}Si reaction, which is one of the astrophysically important nuclear reactions to understand the production of the ground state of {sup 26}Al, the emitter of its characteristic 1.809-MeV gamma-ray, under the explosive stellar environments such as novae and X-ray bursts. In this work, several resonances above the proton threshold level have been observed with a high statistics and background free through a covered the range of excitation energies from E{sub x}{approx} 6.8 to 8.2 MeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Beam optics and the pp2pp experiment at RHIC

The newly installed forward detector system at the STAR experiment at RHIC measures small angle elastic and inelastic scattering of polarized protons on polarized protons. The detector system makes use of a pair of Roman Pot (RP) detectors, instrumented with silicon detectors, and located on either side of the STAR intersection region downstream of the DX and D0 dipoles and quadrupole triplets. The parallel to point optics is designed so that scattering angles are determined from position measurements at the RP's with small error. The RP setup allows measurement of position and angle for a subset of the scattered protons. With this position/angle correlations at the RP's can be compared with optics model predictions to get a measure of the accuracy of the quadrupole triplet current settings. The current in each quadrupole in the triplets is comprised of sums and differences of up to six power supplies and an overall 1% error in the triplet field strengths results in a 4% error in four-momentum transfer squared. This technique is also useful to check the polarity of the skew elements located in each quadrupole triplet. Results of the analysis will be presented.

43 PARTICLE ACCELERATORS↗

Two-dimensional imaging of edge-localized modes in KSTAR plasmas unperturbed and perturbed by n=1 external magnetic fields

The temporal evolution of edge-localized modes (ELMs) has been studied using a 2-D electron cyclotron emission imaging system in the KSTAR tokamak. The ELMs are observed to evolve in three distinctive stages: the initial linear growth of multiple filamentary structures having a net poloidal rotation, the interim state of regularly spaced saturated filaments, and the final crash through a short transient phase characterized by abrupt changes in the relative amplitudes and distance among filaments. The crash phase, typically consisted of multiple bursts of a single filament, involves a complex dynamics, poloidal elongation of the bursting filament, development of a fingerlike bulge, and fast localized burst through the finger. Substantial alterations of the ELM dynamics, such as mode number, poloidal rotation, and crash time scale, have been observed under external magnetic perturbations with the toroidal mode number n= 1.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Growth of GaN on Si by the Beam Flux Modulation

AlGaN/GaN HEMT structure was grown on Si (111) substrate by plasma-assisted molecular beam epitaxy (PA-MBE) using a beam flux modulation methods. In this result, it was verified that the propagation of treading dislocation (TD) due to N-rich GaN layer was effectively suppressed.

36 MATERIALS SCIENCE↗

Carrier dynamics and activation energy of CdTe quantum dots in a Cd{sub x}Zn{sub 1-x}Te quantum well

We investigate the optical properties of CdTe quantum dots (QDs) in a Cd{sub 0.3}Zn{sub 0.7}Te quantum well (QW) grown on GaAs (100) substrates. Carrier dynamics of CdTe/ZnTe QDs and quantum dots-in-a-well (DWELL) structure is studied using time-resolved photoluminescence (PL) measurements, which show the longer exciton lifetime of the DWELL structure. The activation energy of the electrons confined in the DWELL structure, as obtained from the temperature-dependent PL spectra, was also higher than that of electrons confined in the CdTe/ZnTe QDs. This behavior is attributed to the better capture of carriers into QDs within the surrounding QW.

36 MATERIALS SCIENCE↗

Rapidity dependence of deuteron production in central Au+Au collisions at {radical}(s{sub NN})=200 GeV

We have measured the distributions of protons and deuterons produced in the 20% most central Au+Au collisions at the Relativistic Heavy-Ion Collider (RHIC) ({radical}(s{sub N{sub N}})=200 GeV) over a very wide range of transverse and longitudinal momentum. Near midrapidity we have also measured the distribution of antiprotons and antideuterons. We present our results in the context of coalescence models. In particular, we extract the ''homogeneity volume'' and the average phase-space density for protons and antiprotons. Near central rapidity the coalescence parameter B{sub 2}(p{sub T}) and the space-averaged phase-space density <f>(p{sub T}) are very similar for both protons and antiprotons. For protons we see little variation of either B{sub 2}(p{sub T}) or the space-averaged phase-space density as the rapidity increases from 0 to 3. However, these quantities depend strongly on p{sub T} at all rapidities. These results are in contrast to data from lower-energy collisions where the proton and antiproton phase-space densities are different at y=0, and both B{sub 2} and <f> depend strongly on rapidity.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Collection optics design for KSTAR Thomson scattering system

The collection optics designs are described for the Thomson scattering diagnostic of the Korea superconducting tokamak advanced research (KSTAR) device. The optical systems collecting the light emission induced through the interaction between the plasma electrons and a laser beam are key components for the Thomson scattering system. A duo-lens system was examined, and the final optical designs were derived for Thomson scattering diagnostic of KSTAR.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Development of KSTAR Thomson scattering system

To measure the electron temperature (T{sub e}) and electron density (n{sub e}) profiles in the Korean Superconducting Tokamak Advanced Research (KSTAR) device for the KSTAR third campaign (September 2010), we designed and installed a Thomson scattering system. The KSTAR Thomson scattering system is designed as a tangential Thomson scattering system and utilizes the N-, L-, and B-ports. The N-port is designed for the collection optics with a cassette system, the L-port is the laser input port, and the B-port is the location of the beam dump. In this paper, we will describe the final design of the KSTAR Thomson scattering system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Comparative Study on AC Conductivity and Dielectric Behavior of Multiwalled Carbon Nanotubes and Polyaniline Coated Multiwalled Carbon Nanotubes Filled High Density Polyethylene-Carbon Black Nanocomposites

This paper presents an experimental investigation on AC conductivity and dielectric behavior of carbon black reinforced high density polyethylene (HDPE-CB) and HDPE-CB filled with multiwalled carbon nanotubes (MWNTs-CB-HDPE) and Polyaniline (PAni) coated MWNTs-CB-HDPE nanocomposites. The electrical properties such as dielectric constant ({epsilon}'), dissipation factor (tan {delta}) and AC conductivity ({sigma}{sub ac}) of nanocomposites have been measured with reference to the weight fraction (0.5 and 1 wt% MWNTs), frequency (75 KHz-30 MHz), temperature (25-90 deg. C) and sea water ageing. The experimental results showed that the increased AC conductivity and dielectric constant of the nanocomposites were influenced by PAni coated MWNTs in HDPE-CB nanocomposites. The value of dielectric constant and tan {delta} decreased with increasing frequency. Further more, above 5 MHz the AC conductivity increases drastically whereas significant effect on tan {delta} was observed in less than 1 MHz.

36 MATERIALS SCIENCE↗

A strong ferroelectric ferromagnet created by means of spin-lattice coupling.

Ferroelectric ferromagnets are exceedingly rare, fundamentally interesting multiferroic materials that could give rise to new technologies in which the low power and high speed of field-effect electronics are combined with the permanence and routability of voltage-controlled ferromagnetism. Furthermore, the properties of the few compounds that simultaneously exhibit these phenomena are insignificant in comparison with those of useful ferroelectrics or ferromagnets: their spontaneous polarizations or magnetizations are smaller by a factor of 1,000 or more. The same holds for magnetic- or electric-field-induced multiferroics. Owing to the weak properties of single-phase multiferroics, composite and multilayer approaches involving strain-coupled piezoelectric and magnetostrictive components are the closest to application today. Recently, however, a new route to ferroelectric ferromagnets was proposed by which magnetically ordered insulators that are neither ferroelectric nor ferromagnetic are transformed into ferroelectric ferromagnets using a single control parameter, strain. The system targeted, EuTiO{sub 3}, was predicted to exhibit strong ferromagnetism (spontaneous magnetization, {approx}7 Bohr magnetons per Eu) and strong ferroelectricity (spontaneous polarization, {approx}10 {micro}C cm{sup -2}) simultaneously under large biaxial compressive strain. These values are orders of magnitude higher than those of any known ferroelectric ferromagnet and rival the best materials that are solely ferroelectric or ferromagnetic. Hindered by the absence of an appropriate substrate to provide the desired compression we turned to tensile strain. Here we show both experimentally and theoretically the emergence of a multiferroic state under biaxial tension with the unexpected benefit that even lower strains are required, thereby allowing thicker high-quality crystalline films. This realization of a strong ferromagnetic ferroelectric points the way to high-temperature manifestations of this spin-lattice coupling mechanism. Our work demonstrates that a single experimental parameter, strain, simultaneously controls multiple order parameters and is a viable alternative tuning parameter to composition for creating multiferroics.

36 MATERIALS SCIENCE↗

Hadron Spectroscopy in Double Pomeron Exchange Processes with the STAR Detector at RHIC

A new hadron spectroscopy program to study particle production at the central region through diffractive processes in polarized p+p collisions at {radical}(s) = 200-500 GeV has been initiated with the STAR detector at RHIC. Staged implementation of multiple Roman Pot stations for tagging forward protons in diffractive processes allows studying for the first time the dynamics of the particle production in the diffractive processes systematically at the RHIC energy regime. The STAR detector system with complete azimuthal coverage at the central region equipped with excellent particle reconstruction capabilities enables studies of the constituent gluonic degree of freedom in double Pomeron exchange processes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Adsorption-controlled growth of BiMnO{sub 3} films by molecular-beam epitaxy

We have developed the means to grow BiMnO{sub 3} thin films with unparalleled structural perfection by reactive molecular-beam epitaxy and determined its band gap. Film growth occurs in an adsorption-controlled growth regime. Within this growth window bounded by oxygen pressure and substrate temperature at a fixed bismuth overpressure, single-phase films of the metastable perovskite BiMnO{sub 3} may be grown by epitaxial stabilization. X-ray diffraction reveals phase-pure and epitaxial films with omega rocking curve full width at half maximum values as narrow as 11 arc sec (0.003 deg. ). Optical absorption measurements reveal that BiMnO{sub 3} has a direct band gap of 1.1+-0.1 eV.

36 MATERIALS SCIENCE↗

Diagnostics for first plasma and development plan on KSTAR

The first plasma with target values of the plasma current and the pulse duration was finally achieved on June 13, 2008 in the Korea Superconducting Tokamak Advanced Research (KSTAR). The diagnostic systems played an important role in achieving successful first plasma operation for the KSTAR tokamak. The employed plasma diagnostic systems for the KSTAR first plasma including the magnetic diagnostics, millimeter-wave interferometer, inspection illuminator, H{sub {alpha}}, visible spectrometer, filterscope, and electron cyclotron emission (ECE) radiometer have provided the main plasma parameters, which are essential for the plasma generation, control, and physics understanding. Improvements to the first diagnostic systems and additional diagnostics including an x-ray imaging crystal spectrometer, reflectometer, ECE radiometer, resistive bolometer, and soft x-ray array are scheduled to be added for the next KSTAR experimental campaign in 2009.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Highly conductive indium zinc oxide prepared by reactive magnetron cosputtering technique using indium and zinc metallic targets

Zn-doped In{sub 2}O{sub 3} film is frequently deposited from an oxide target; but the use of metallic target is increasingly expected as preparing the film with comparable properties. This work aimed to prepare a highly conductive and transparent Zn-doped In{sub 2}O{sub 3} thin film on Corning Eagle{sup 2000} glass substrate by magnetron cosputtering method using indium and zinc targets. Structural characterization was performed using x-ray diffraction and x-ray photoelectron spectroscopy. The film had an amorphous structure when the film was prepared on an unheated substrate, but had an In{sub 2}O{sub 3} polycrystalline structure when the film was deposited on 150 and 300 deg. C substrates. The electrical properties of the film were greatly affected by annealing; the Zn-doped In{sub 2}O{sub 3} film had a low resistivity of 6.1x10{sup -4} {Omega} cm and an average transmittance of 81.7% when the film was deposited without substrate heating and followed a 600 deg. C annealing.

36 MATERIALS SCIENCE↗

Descriptions of a linear device developed for research on advanced plasma imaging and dynamics

The research on advanced plasma imaging and dynamics (RAPID) device is a newly developed linear electron cyclotron resonance (ECR) plasma device. It has a variety of axial magnetic field profiles provided by eight water-cooled magnetic coils and two dc power supplies. The positions of the magnetic coils are freely adjustable along the axial direction and the power supplies can be operated with many combinations of electrical wiring to the coils. A 6 kW 2.45 GHz magnetron is used to produce steady-state ECR plasmas with central magnetic fields of 875 and/or 437.5 G (second harmonic). The cylindrical stainless steel vacuum chamber is 300 mm in diameter and 750 mm in length and has eight radial and ten axial ports including 6-in. and 8-in. viewing windows for heating and diagnostics. Experimental observation of ECR plasma heating has been recently carried out during the initial plasma operation. The main diagnostic systems including a 94 GHz heterodyne interferometer, a high-resolution 25 channel one-dimensional array spectrometer, a single channel survey spectrometer, and an electric probe have been also prepared. The RAPID device is a flexible simulator for the understanding of tokamak edge plasma physics and new diagnostic system development. In this work, we describe the RAPID device and initial operation results.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗