Engineering topics

Lee, Jaeyong

Publications and source records attributed to Lee, Jaeyong.

6 records

DOE OSTI2026

Analysis of Small-Angle Neutron Scattering from Blends of Charged and Neutral Polymers Based on Rod–Coil Random Phase Approximation

Blends of charged and neutral polymers are of interest due to potential applications in rechargeable batteries. In this study, concentration fluctuations in blends of charged poly[lithium 3-(methacryloyloxy)propylsulfonyl-1-(trifluoromethanesulfonyl)imide] (PLiMTFSI) and neutral poly(ethylene oxide) (PEO) were investigated by small-angle neutron scattering (SANS). The scattering data were analyzed in the framework of the random phase approximation (RPA). Since ion dissociation can lead to stiffening, the charged polymers were approximated as rods, while the neutral polymers were assumed to be random coils. This approach works reasonably well at low weight fractions of charged polymers. For blends with higher weight fractions of the charged polymer, concentration fluctuations were highly suppressed, resulting in q-independent coherent structure factors that are inconsistent with the rod-coil RPA.

Lee, Jaeyong↗

DOE OSTI2026

Minimizing Interfacial Resistance between Polymer Electrolytes and Metal Electrodes Using Applied Current

Reducing the interfacial resistance between different phases in electrochemical systems is crucial for enabling practical applications. In this work, we proposed a process for reducing the interfacial resistance between polymer electrolytes and metal electrodes. Thus far in the literature, the lowest interfacial resistance reported in these systems is 15 Ω·cm2. In this study, assembled and preconditioned symmetric cells with lithium–indium alloy electrodes showed similar values. The current through the cell was increased in steps up to the limiting current. This resulted in a permanent decrease of the interfacial resistance to values as low as 1 Ω·cm2, a value that is comparable to that of optimized lithium-ion batteries. The proposed process is general, and it could be applied to any combination of polymer electrolytes and metal electrodes.

Lee, Jaeyong↗

DOE OSTI2025

Toward Optimization of Polymer Electrolytes by Electrochemical Characterization: Poly(pentyl malonate) versus Poly(ethylene oxide)

Ion transport in two polymer electrolytes, poly(ethylene oxide) (PEO) and poly(pentyl malonate) (PPM), mixed with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) is studied in the vicinity of the limiting current. The experimental measurements are in quantitative agreement with theoretical predictions based on the concentrated solution theory. The properties of two electrolytes are compared using a new plot wherein the length-normalized limiting current, i lim L, is plotted as a function of the length-normalized potential drop, Φlim/L, in symmetric cells with electrolyte thickness, L. We propose that electrolyte design should aim to obtain the largest values of i lim L and the smallest values of Φlim/L. Using this criterion, PPM/LiTFSI is a better polymer electrolyte than PEO/LiTFSI. We hope that PPM/LiTFSI will serve as a benchmark for developing next-generation polymer electrolytes.

Lee, Jaeyong↗

DOE OSTI2025

Polysilaketals: High‐Performance Polyether‐Based Electrolytes with Tunable Disubstituted Silane Linkers

Polymer electrolytes exhibit higher energy density and improved safety in lithium-ion batteries relative to traditionally used liquid electrolytes but are currently limited by their lower electrochemical performance. Aiming to access polymer electrolytes with competitive electrochemical properties, we developed the anionic ring-opening polymerization (AROP) of cyclic silaketals to synthesize amorphous silicon-containing polyether-based electrolytes with varying substituent bulk of the general formula [OSi(R)2(CH2CH2O)2]n (R=alkyl, phenyl). As opposed to previously reported uncontrolled polycondensation routes toward low molecular weight polysilaketals, AROP allows access to targeted molecular weights above the entanglement threshold of the polymers. The polysilaketal with the lowest steric bulk (P(OSiMe,Me-2EO)) exceeds the conductivity of poly(ethylene oxide) (PEO), a leading polymer electrolyte. To the best of our knowledge, this is the first solid polymer electrolyte to achieve this benchmark. Steric bulk in polysilaketals was found to impart stability and two bulkier polysilaketals, P(OSiEt,Et-2EO) and P(OSiMe,Ph-2EO), exhibited higher current fractions than PEO over a wide range of salt loadings. Moreover, the efficacy of P(OSiEt,Et-2EO) was competitive with that of PEO. Taken together, the tunable and competitive electrochemical properties of polysilaketals validate the systematic incorporation of silyl groups as a strategy to access high performance polymer electrolytes.

Rugh, Haley J↗

DOE OSTI2024

Polysilaketals: High‐Performance Polyether‐Based Electrolytes with Tunable Disubstituted Silane Linkers

Abstract Polymer electrolytes exhibit higher energy density and improved safety in lithium‐ion batteries relative to traditionally used liquid electrolytes but are currently limited by their lower electrochemical performance. Aiming to access polymer electrolytes with competitive electrochemical properties, we developed the anionic ring‐opening polymerization (AROP) of cyclic silaketals to synthesize amorphous silicon‐containing polyether‐based electrolytes with varying substituent bulk of the general formula [OSi(R) 2 (CH 2 CH 2 O) 2 ] n (R=alkyl, phenyl). As opposed to previously reported uncontrolled polycondensation routes toward low molecular weight polysilaketals, AROP allows access to targeted molecular weights above the entanglement threshold of the polymers. The polysilaketal with the lowest steric bulk (P(OSi Me,Me ‐2EO)) exceeds the conductivity of poly(ethylene oxide) (PEO), a leading polymer electrolyte. To the best of our knowledge, this is the first solid polymer electrolyte to achieve this benchmark. Steric bulk in polysilaketals was found to impart stability and two bulkier polysilaketals, P(OSi Et,Et ‐2EO) and P(OSi Me,Ph ‐2EO), exhibited higher current fractions than PEO over a wide range of salt loadings. Moreover, the efficacy of P(OSi Et,Et ‐2EO) was competitive with that of PEO. Taken together, the tunable and competitive electrochemical properties of polysilaketals validate the systematic incorporation of silyl groups as a strategy to access high performance polymer electrolytes.

Rugh, Haley J.↗

DOE OSTI2024

Random Copolymerization of Substituted Dioxolanes: Rational Design of High-Performance Polymer Electrolytes

Polymer electrolytes enhance the safety of lithium-ion battery systems, but current state-of-the-art poly(ethylene oxide)-based polymer electrolytes fail to achieve the electrochemical properties necessary for practical applications. We probed the impact of substituent density on the electrolyte performance by introducing methyl substituents into the backbone of a series of poly(1,3-dioxolane) (PDXL)-based copolymers. The polymerization of 1,3-dioxolane (DXL) and 4-methyl-1,3-dioxolane (MeDXL) yielded a series of random copolymers that were amorphous above 10% MeDXL incorporation. The copolymers with 10 and 20% MeDXL incorporation exhibited higher efficacies than those of either PDXL or poly(ethylene oxide) (PEO), highlighting the use of methyl substituents to control the electrochemical properties of polymer electrolytes.

Rugh, Haley J↗