Search NASA⌕ Search

Engineering topics

Lee, Jennifer D.

Publications and source records attributed to Lee, Jennifer D..

11 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Boosting the H 2 –D 2 Exchange Activity of Dilute Nanoporous Ti–Cu Catalysts through Oxidation–Reduction Cycle–Induced Restructuring

The use of nanoporous metals as catalysts has attracted significant interest in recent years. Their high-curvature, nanoscale ligaments provide not only high surface area but also a high density of undercoordinated step edge and kink sites. However, their long-term stability, especially at higher temperatures, is often limited by thermal coarsening and the associated loss of surface area. Herein, it is demonstrated that the nanoscale morphology of nanoporous Cu can be regenerated by applying oxidation/reduction cycles at 250 °C. Specifically, the morphological evolution and H 2 dissociation activity of hierarchical nanoporous Cu catalysts doped with Ti during structural rearrangement triggered by oxidative and reductive atmospheres at elevated temperatures are studied. In addition to coarsening of the structure at elevated temperatures, oxidation at 400 °C causes an expansion of the ligaments. Further, subsequent reduction at 400 °C leads to the formation of particles and a drop in the H 2 dissociation activity compared the fresh catalyst. However, performing the redox cycle at 250 °C reverses coarsening and boosts the H 2 dissociation activity for the hydrogen–deuterium (H 2 –D 2 ) reaction. Herein, the possibility to reverse coarsening is demonstrated, thereby mitigating the loss of activity frequently observed in nanoporous catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Facilitating Hydrogen Dissociation over Dilute Nanoporous Ti–Cu Catalysts

The dissociation of H 2 is an essential elementary step in many industrial chemical transformations, typically requiring precious metals. Here, we report a hierarchical nanoporous Cu catalyst doped with small amounts of Ti (npTiCu) that increases the rate of H 2 –D 2 exchange by approximately one order of magnitude compared to the undoped nanoporous Cu (npCu) catalyst. The promotional effect of Ti was measured via steady-state H 2 –D 2 exchange reaction experiments under atmospheric pressure flow conditions in the temperature range of 300–573 K. Pretreatment with flowing H 2 is required for stable catalytic performance, and two temperatures, 523 and 673 K, were investigated. The experimentally determined H 2 –D 2 exchange rate is 5–7 times greater for npTiCu vs the undoped Cu material under optimized pretreatment and reaction temperatures. The H 2 pretreatment leads to full reduction of Cu oxide and partial reduction of surface Ti oxide species present in the as-prepared catalyst as demonstrated using in situ ambient pressure X-ray photoelectron spectroscopy and X-ray absorption spectroscopy. The apparent activation energies and pre-exponential factors measured for H 2 –D 2 exchange are substantially different for Ti-doped vs undoped npCu catalysts. Density functional theory calculations suggest that isolated, metallic Ti atoms on the surface of the Cu host can act as the active surface sites for hydrogen recombination. Furthermore, the increase in the rate of exchange above that of pure Cu is caused primarily by a shift in the rate-determining step from dissociative adsorption on Cu to H/D atom recombination on Ti-doped Cu, with the corresponding decrease in activation entropy that it produces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Synthesis and Characterization of Core-Shell Cu-Ru, Cu-Rh, and Cu-Ir Nanoparticles

Optimizing the use of expensive precious metals is critical to developing sustainable and low-cost processes for heterogeneous catalysis or electrochemistry. Here, we report a synthesis method that yields core-shell Cu-Ru, Cu-Rh, and Cu-Ir nanoparticles with the platinum-group metals segregated on the surface. The synthesis of Cu-Ru, Cu-Rh, and Cu-Ir particles allows maximization of the surface area of these metals and improves catalytic performance. Furthermore, the Cu core can be selectively etched to obtain nanoshells of the platinum-group metal components, leading to a further increase in the active surface area. Characterization of the samples was performed with X-ray absorption spectroscopy, X-ray powder diffraction, and ex situ and in situ transmission electron microscopy. CO oxidation was used as a reference reaction: the three core-shell particles and derivatives exhibited promising catalyst performance and stability after redox cycling. Furthermore, these results suggest that this synthesis approach may optimize the use of platinum-group metals in catalytic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Replication Data for: Dynamical Change of Valence States and Structure in NiCu 3 Nanoparticles during Redox Cycling

The data underlying this published work have been made publicly available in this repository as part of the IMASC Data Management Plan. This work was supported as part of the Integrated Mesoscale Architectures for Sustainable Catalysis (IMASC), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0012573.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Microwave Heating of Nanocrystals for Rapid, Low-Aggregation Intermetallic Phase Transformations

The use of intermetallic Pt–Co nanocrystals (NCs) for the electrocatalytic oxygen reduction reaction is quickly gaining interest thanks to the higher electrochemical stability of the intermetallic L1 o phase compared to a random alloy A1 phase. However, the thermal treatment that enables the intermetallic phase transformation also causes considerable NC aggregation, resulting in a significant loss of electrochemically active surface area. Herein, we report the use of microwave radiation to induce the intermetallic phase transformation in Cu-doped Pt–Co NCs. We demonstrate that microwave radiation reduces NC aggregation while allowing for a complete phase transformation in only 30 s. Furthermore, these microwave-treated NCs demonstrate higher mass activity for the oxygen reduction reaction while maintaining electrochemical stability similar to the thermally annealed samples.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Dilute Alloys Based on Au, Ag, or Cu for Efficient Catalysis: From Synthesis to Active Sites

The development of new catalyst materials for energy-efficient chemical synthesis is critical as over 80% of industrial processes rely on catalysts, with many of the most energy-intensive processes specifically using heterogeneous catalysis. Catalytic performance is a complex interplay of phenomena involving temperature, pressure, gas composition, surface composition and structure over multiple length and time scales. In response to this complexity, the integrated approach to heterogeneous dilute-alloy catalysis reviewed here brings together materials synthesis, mechanistic surface chemistry, reaction kinetics, in-situ and operando characterization, and theoretical calculations in a coordinated effort to develop design principles to predict and improve catalytic selectivity. Dilute alloy catalysts—in which isolated atoms or small ensembles of the minority metal on the host metal lead to enhanced reactivity while retaining selectivity—are particularly promising as selective catalysts. Several dilute alloy materials using Au, Ag and Cu as the majority host element, including more recently introduced support-free nanoporous metals and oxide-supported nanoparticle "raspberry colloid templated (RCT)" materials, are reviewed for selective oxidation and hydrogenation reactions. Progress in understanding how such dilute alloy catalysts can be used to enhance selectivity of key synthetic reactions is reviewed, including quantitative scaling from model studies to catalytic conditions. The dynamic evolution of catalyst structure and composition studied in surface science and catalytic conditions and their relationship to catalytic function are also discussed, followed by advanced characterization and theoretical modeling that have been developed to determine the distribution of minority metal atoms at or near the surface. Furthermore, the integrated approach demonstrates the success of bridging the divide between fundamental knowledge and design of catalytic processes in complex catalytic systems, which can accelerate the development of new and efficient catalytic processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Dynamical Change of Valence States and Structure in NiCu 3 Nanoparticles during Redox Cycling

Alloyed materials are promising candidates to improve catalytic processes. Ni–Cu nanoparticles are used for various reactions, including processes with biomass-derived components. However, dynamical restructuring effects alter the catalytic properties and can deactivate the sample. To understand these structural modifications, a multimodal investigation of NiCu 3 /C was performed to determine compositional and morphological changes during a redox cycle to simulate reduction and oxidation of the catalyst during reaction. We exploit a novel correlative, multimodal approach that combines in situ X-ray absorption spectroscopy (XAS) and in situ scanning transmission electron microscopy and electron energy-loss spectroscopy (STEM-EELS) to describe changes that occur in the sample in realistic conditions. In the fresh sample, there are two morphologies present: core–shell and hollow. Segregation of Cu was observed in both types of particles after synthesis, with Cu being more oxidized in the hollow structures. Upon reduction for 2 h under H 2 at 400 °C, the Cu was reduced, although segregation of Cu and Ni was still observed. Subsequent exposure to O 2 at 400 °C led to a strong reoxidation of Cu with the formation of hollow particles with compositional heterogeneities. The oxidation of metals and segregation phenomena can be related to known catalytic properties of NiCu 3 /C particles, especially regarding the hydrodeoxygenation of 5-hydroxymethylfurfural to 2,5-dimethylfuran.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Structural and Valence State Modification of Cobalt in CoPt Nanocatalysts in Redox Conditions

Platinum is the primary catalyst for many chemical reactions in the field of heterogeneous catalysis. However, platinum is both expensive and rare. Therefore, it is advantageous to combine Pt with another metal to reduce cost while also enhancing stability. To that end, Pt is often combined with Co to form Co-Pt nanocrystals. However, dynamical restructuring effects that occur during reaction in Co-Pt ensembles can impact catalytic properties. In this study, model Co 2 Pt 3 nanoparticles supported on carbon were characterized during a redox cycle with two in situ approaches, namely X-ray absorption spectroscopy (XAS) and scanning transmission electron microscopy (STEM) using a multimodal microreactor. The sample was exposed to temperatures up to 500 °C under H 2 , and then to O 2 at 300 °C. Irreversible segregation of Co in the Co-Pt particles was seen during redox cycling and substantial changes of the oxidation state of Co were observed. After the H 2 treatment, a fraction of Co could not be fully reduced and incorporated into a mixed Co-Pt phase. Re-oxidation of the sample increased Co segregation, and the segregated material had a different valence state than in the fresh, oxidized sample. Furthermore, this in situ study describes dynamical restructuring effects in CoPt nano-catalysts at the atomic scale that are crucial to understand to improve the design of catalysts used in major chemical processes.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Engineering the Composition of Bimetallic Nanocrystals to Improve Hydrodeoxygenation Selectivity for 2-Acetylfuran

Hydrodeoxygenation (HDO) of 2-acetylfuran (2-AF) was examined at 473 K and 33 bar over carbon-supported, bimetallic catalysts. Monodispersed, Pt-based (PtNi, PtCo, and PtCu) and Ni-based (NiCu) nanocrystals (NCs) with well-defined sizes and compositions were prepared via colloidal synthesis. Steady-state, flow-reactor measurements demonstrate that selectivities for the HDO reaction to 2-ethylfuran (2-EF) are strongly dependent on the alloy compositions. The HDO of 2-AF is shown to be sequential, where 2-EF can react further to form over-hydrogenated products. The NiCu 3 /C nanocatalyst was superior to the other bimetallics; with the optimal residence time, it was possible to achieve a selectivity of 75% 2-EF with 80% conversion of 2-AF, with good stability for up to at least 5 hours time-on-stream. Deactivation due to coking became an issue when the NCs were deposited on oxide supports with weak acidity (SiO 2 and γ-Al 2 O 3 ). Furthermore, this work provides insights into which bimetallic catalytic systems might be useful for HDO of 2-AF reaction.

2-acetylfuran↗