Search NASA⌕ Search

Engineering topics

Lee, M

Publications and source records attributed to Lee, M.

31 records · Page 2

The Targeted Synthesis of Single Site Vanadyl Species on the Surface and in the Framework of Silicate Building Block Materials

A new synthetic methodology for the targeted preparation of single site, atomically dispersed vanadyl groups in silicate matrices is described. This methodology requires functionalized silicate building blocks Si{sub 8}O{sub 20}(OSnMe{sub 3}){sub 8} that become linked together through vanadyl ({triple_bond}V=O) groups in the matrix. A sequential addition strategy is illustrated which allows the targeting of specific connectivities for the vanadyl group to the silicate building block matrix (i.e. the number of V-O-Si bonds linking the vanadyl unit). Silicate matrices containing exclusively 3-connected (OV(OSi{sub cube}){sub 3}), 2-connected (OV(OR)(OSi{sub cube}){sub 2}) or 1-connected (OVCl{sub 2}(OSi{sub cube})) vanadyl sites are described and characterized via a wide variety spectroscopic and physical techniques (gravimetric analysis, EXAFS, AA and solid state NMR ({sup 51}V, {sup 29}Si, and {sup 17}O)). We demonstrate how the combination of gravimetric, solid state NMR (SSNMR) and EXAFS data can be used to uniquely define the vanadyl sites in these matrices. Furthermore, the use of {sup 17}O SSNMR (1D and MQMAS) is illustrated as an indirect spectroscopic probe to follow changes in the ligands bound to vanadium atom within the vanadyl groups in these matrices.

36 MATERIALS SCIENCE↗

Lattice Commissioning Stretgy Simulation for the B Factory

To prepare for the PEP-II turn on, we have studied one commissioning strategy with simulated lattice errors. Features such as difference and absolute orbit analysis and correction are discussed. To prepare for the commissioning of the PEP-II injection line and high energy ring (HER), we have developed a system for on-line orbit analysis by merging two existing codes: LEGO and RESOLVE. With the LEGO-RESOLVE system, we can study the problem of finding quadrupole alignment and beam position (BPM) offset errors with simulated data. We have increased the speed and versatility of the orbit analysis process by using a command file written in a script language designed specifically for RESOLVE. In addition, we have interfaced the LEGO-RESOLVE system to the control system of the B-Factory. In this paper, we describe online analysis features of the LEGO-RESOLVE system and present examples of practical applications.

43 PARTICLE ACCELERATORS↗

RESOLVE Upgrades for on Line Lattice Error Analysis

We have increased the speed and versatility of the orbit analysis process by adding a command file, or 'script' language, to RESOLVE. This command file feature enables us to automate data analysis procedures to detect lattice errors. We describe the RESOLVE command file and present examples of practical applications.

43 PARTICLE ACCELERATORS↗

Structure determination and analysis of a haemolytic gingipain adhesin domain from Porphyromonas gingivalis

Porphyromonas gingivalis is an obligately anaerobic bacterium recognized as an aetiological agent of adult periodontitis. P. gingivalis produces cysteine proteinases, the gingipains. The crystal structure of a domain within the haemagglutinin region of the lysine gingipain (Kgp) is reported here. The domain was named K2 as it is the second of three homologous structural modules in Kgp. The K2 domain structure is a 'jelly-roll' fold with two anti-parallel {beta}-sheets. This fold topology is shared with adhesive domains from functionally diverse receptors such as MAM domains, ephrin receptor ligand binding domains and a number of carbohydrate binding modules. Possible functions of K2 were investigated. K2 induced haemolysis of erythrocytes in a dose-dependent manner that was augmented by the blocking of anion transport. Further, cysteine-activated arginine gingipain RgpB, which degrades glycophorin A, sensitized erythrocytes to the haemolytic effect of K2. Cleaved K2, similar to that found in extracted Kgp, lacks the haemolytic activity indicating that autolysis of Kgp may be a staged process which is artificially enhanced by extraction of the protein. The data indicate a functional role for K2 in the integrated capacity conferred by Kgp to enable the porphyrin auxotroph P. gingivalis to capture essential haem from erythrocytes.

36 MATERIALS SCIENCE↗

Occurrence of gas hydrate in Oligocene Frio sand: Alaminos Canyon Block 818: Northern Gulf of Mexico

A unique set of high-quality downhole shallow subsurface well log data combined with industry standard 3D seismic data from the Alaminos Canyon area has enabled the first detailed description of a concentrated gas hydrate accumulation within sand in the Gulf of Mexico. The gas hydrate occurs within very fine grained, immature volcaniclastic sands of the Oligocene Frio sand. Analysis of well data acquired from the Alaminos Canyon Block 818 No.1 ('Tigershark') well shows a total gas hydrate occurrence 13 m thick, with inferred gas hydrate saturation as high as 80% of sediment pore space. Average porosity in the reservoir is estimated from log data at approximately 42%. Permeability in the absence of gas hydrates, as revealed from the analysis of core samples retrieved from the well, ranges from 600 to 1500 millidarcies. The 3-D seismic data reveals a strong reflector consistent with significant increase in acoustic velocities that correlates with the top of the gas-hydrate-bearing sand. This reflector extends across an area of approximately 0.8 km{sup 2} and delineates the minimal probable extent of the gas hydrate accumulation. The base of the inferred gas-hydrate zone also correlates well with a very strong seismic reflector that indicates transition into units of significantly reduced acoustic velocity. Seismic inversion analyses indicate uniformly high gas-hydrate saturations throughout the region where the Frio sand exists within the gas hydrate stability zone. Numerical modeling of the potential production of natural gas from the interpreted accumulation indicates serious challenges for depressurization-based production in settings with strong potential pressure support from extensive underlying aquifers.

54 ENVIRONMENTAL SCIENCES↗

Thermal Conductivity Measurements of Copper-Coated Metal Hydrides (LaNi5, Ca0.6Mn0.4Ni5, and LaNi4.75Al0.25) for use in Metal Hydride Hydrogen Compression Systems

This study was performed to supplement the limited data on metal hydrides by experimentally determining the thermal conductivity of various metal hydride powder pellets that underwent a copper coating process. Three different metal hydride powders were tested (LaNi{sub 5}, Ca{sub 0.6}Mm{sub 0.4}Ni{sub 5}, and LaNi{sub 4.75}Al{sub 0.25}) for their thermal conductivity, with variations in testing parameters, and with copper coating processes that varied from 30 to 60 s A testing apparatus was specifically designed for this experiment, and the study reported thermal conductivity values of 3-6 W/m-K.

08 HYDROGEN↗

Effects of Block Length and Solution-Casting Conditions on the Final Morphology and Properties of Disulfonated Poly(arylene ether sulfone) Multiblock Copolymer Films for Proton Exchange Membranes

The effects of block length and solution-casting conditions on the final microstructures and properties of disulfonated poly(arylene ether sulfone) multiblock copolymer (BPSH100-BPS0) films for proton exchange membranes were investigated based on the basic principles of microstructure formation of block copolymers. Morphological studies using transmission electron microscopy and small angle X-ray scattering demonstrated that as the block length increased, the inter-ionic-domain distance increased, with a subsequent increase in lamellar ordering and long-range continuity. Further enhancement in morphological order was achieved by simply utilizing a selective solvent, dimethylacetamide, which is good and marginal for the sulfonated and unsulfonated blocks, respectively, rather than a neutral solvent, N-metyl-2-pyrrolidone. These morphological enhancements led to higher proton conductivity and water uptake. Drying temperature and/or solvent removal rate were observed to have considerable effects on water uptake and swelling behavior, being coupled with solvent selectivity. Also, the multiblock copolymer consisting of longer blocks was found to be more sensitive to the variation of the processing conditions such as solvent type and film drying temperature.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Ion heating and energy partition at the heliospheric termination shock: hybrid simulations and analytical model

The Los Alamos hybrid simulation code is used to examine heating and the partition of dissipation energy at the perpendicular heliospheric termination shock in the presence of pickup ions. The simulations are one-dimensional in space but three-dimensional in field and velocity components, and are carried out for a range of values of pickup ion relative density. Results from the simulations show that because the solar wind ions are relatively cold upstream, the temperature of these ions is raised by a relatively larger factor than the temperature of the pickup ions. An analytic model for energy partition is developed on the basis of the Rankine-Hugoniot relations and a polytropic energy equation. The polytropic index {gamma} used in the Rankine-Hugoniot relations is varied to improve agreement between the model and the simulations concerning the fraction of downstream heating in the pickup ions as well as the compression ratio at the shock. When the pickup ion density is less than 20%, the polytropic index is about 5/3, whereas for pickup ion densities greater than 20%, the polytropic index tends toward 2.2, suggesting a fundamental change in the character of the shock, as seen in the simulations, when the pickup ion density is large. The model and the simulations both indicate for the upstream parameters chosen for Voyager 2 conditions that the pickup ion density is about 25% and the pickup ions gain the larger share (approximately 90%) of the downstream thermal pressure, consistent with Voyager 2 observations near the shock.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of Tritium Storage and Transport Vessels

The purpose of this study is to develop tritium storage and transport vessels for industrial applications. Prototype tritium storage and transport vessels were designed and manufactured. Uranium and zirconium/cobalt (ZrCo) metals were selected for the storage materials. The prototype transport container for the vessel was designed on the basis of Type B transportation package standards. The transport container was composed of a steel drum, inner packing materials, and a storage vessel. A second refinement cap was installed on the prototype vessel to protect the valves on the 100 kCi vessel. The vessel is stored in a steel drum packed with a thermal barrier and a shock absorber. Structural, thermal, shielding, and confinement analyses have to be performed for this container based on Type B requirements. (authors)

42 ENGINEERING↗

Phase Change Materials and Their Application to Random Access Memory Technology

Phase change materials can exist in two different phases, the amorphous and the crystalline phase, which exhibit distinctly different physical properties. It is possible to repeatedly switch the state of these materials, from the amorphous phase to the crystalline phase by heating the material above its crystallization temperature, and from the crystalline to the amorphous phase by melt-quenching. Phase change materials have been utilized very successfully in all modern optical re-writable storage media such as CDs, DVDs and Blu-ray disks. Recently, they have also been applied to solid-state memory devices where their large difference in electrical resistivity is used to store information. This paper reviews the unique properties of phase change materials in particular as they are important for their application to these devices.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Electron Beam Lifetime in SPEAR3: Measurement and Simulation

In this paper we report on electron beam lifetime measurements as a function of scraper position, RF voltage and bunch fill pattern in SPEAR3. We then outline development of an empirical, macroscopic model using the beam-loss rate equation. By identifying the dependence of loss coefficients on accelerator and beam parameters, a numerically-integrating simulator can be constructed to compute beam decay with time. In a companion paper, the simulator is used to train a parametric, non-linear dynamics model for the system [1].

43 PARTICLE ACCELERATORS↗

Parametric Modeling of Electron Beam Loss in Synchrotron Light Sources

Synchrotron light is used for a wide variety of scientific disciplines ranging from physical chemistry to molecular biology and industrial applications. As the electron beam circulates, random single-particle collisional processes lead to decay of the beam current in time. We report a simulation study in which a combined neural network (NN) and first-principles (FP) model is used to capture the decay in beam current due to Touschek, Bremsstrahlung, and Coulomb effects. The FP block in the combined model is a parametric description of the beam current decay where model parameters vary as a function of beam operating conditions (e.g. vertical scraper position, RF voltage, number of the bunches, and total beam current). The NN block provides the parameters of the FP model and is trained (through constrained nonlinear optimization) to capture the variation in model parameters as operating condition of the beam changes. Simulation results will be presented to demonstrate that the proposed combined framework accurately models beam decay as well as variation to model parameters without direct access to parameter values in the model.

43 PARTICLE ACCELERATORS↗