Search NASA⌕ Search

Engineering topics

Lee, Richard J.

Publications and source records attributed to Lee, Richard J..

Effective antiviral coatings for deactivating SARS-CoV-2 virus on N95 respirator masks or filters

The application of antiviral coatings to masks and respirators is a potential mitigating step toward reducing viral transmission during the SARS-CoV-2 (severe acute respiratory syndrome coronavirus 2) pandemic. The use of appropriate masks, social distancing, and vaccines is the immediate solution for limiting the viral spread and protecting people from this virus. N95 respirator masks are effective in filtering the virus particles, but they cannot kill or deactivate the virus. We report a possible approach to deactivating SARS-CoV-2 by applying an antimicrobial coating (Goldshield 75) to masks and respirators, rendering them suitable for repeated use. Masks coated with Goldshield 75 demonstrated continuous inactivation of the Alpha and Beta variants of the SARS-CoV-2 over a 3-day period and no loss of inactivation when stored at temperatures at 50 °C.

36 MATERIALS SCIENCE↗

Polymer, Additives, and Processing Effects on N95 Filter Performance

The current severe acute respiratory syndrome coronavirus 2 (SARS-COV-2) pandemic has highlighted the need for personal protective equipment, specifically filtering facepiece respirators like N95 masks. While it is common knowledge that polypropylene (PP) is the industry standard material for filtration media, trial and error is often required to identify suitable commercial precursors for filtration media production. This work aims to identify differences between several commercial grades of PP and demonstrate the development of N95 filtration media with the intent that the industry partners can pivot and help address N95 shortages. Three commercial grades of high melt flow index PP were melt blown at Oak Ridge National Laboratory and broadly characterized by several methods including differential scanning calorimetry (DSC), X-ray diffraction (XRD), and neutron scattering. Despite the apparent similarities (high melt flow and isotacticity) between PP feedstocks, the application of corona charging and charge enhancing additives improve each material to widely varying degrees. From the analysis performed here, the most differentiating factor appears to be related to crystallization of the polymer and the resulting electret formation. Materials with higher crystallization onset temperatures, slower crystallization rates, and larger number of crystallites form a stronger electret and are more effective at filtration.

36 MATERIALS SCIENCE↗

Encapsulated Sb and Sb 2 O 3 particles in waste-tire derived carbon as stable composite anodes for sodium-ion batteries

A conductive network of waste-tire derived carbon (WTC) was used to produce homogeneous Sb/WTC and Sb 2 O 3 /WTC composite materials via ball milling as promising anodes for sodium-ion batteries (SIBs). Highly reversible redox peaks at 0.81/0.71, 0.25 V for Sb/WTC and 0.80/0.76, 0.21/0.26 V for Sb 2 O 3 /WTC anodes have been observed related to Na + intercalation and deintercalation in carbon and Na–Sb and Na 3 Sb as plausible conversion/alloy reactions. Sodium half-cells delivered reversible discharge capacities of 206 mA h g -1 and 207 mA h g -1 at a current density of 37 mA g -1 for the composite Sb/WTC and Sb 2 O 3 /WTC materials, respectively. Both the Sb/WTC and Sb 2 O 3 /WTC composite materials showed impressive capacity retention with 85% and 88%, respectively after 100 cycles. Furthermore, rate capability studies at 60 °C yielded an enhanced capacity of 240 mA h g -1 for Sb/WTC and 300 mA h g -1 for Sb 2 O 3 /WTC at 37 mA g -1 .

25 ENERGY STORAGE↗

Magnetic adsorbents for selective removal of selenite from contaminated water

Novel meso- and microporous tire-derived carbon framework as a support for magnetic iron oxide nanoparticle adsorbents (MNA) that selectively adsorb selenite (Se(IV)) ions from contaminated water has been developed. Carbon-supported magnetic nanoparticle adsorbents (C-MNA) displayed higher adsorption values compared to MNA from 5 to 50 ppm selenite concentrations, maximizing at 48 ± 5 mg/g capacity with >99% Se removal at pH 3 and 5, and outperforms MNA at pH 7. Here these improvements will expand the range of water sources that can be treated, as well as easing adsorbent collection through magnetic separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sustainable Waste Tire Derived Carbon Material as a Potential Anode for Lithium-Ion Batteries

The rapidly growing automobile industry increases the accumulation of end-of-life tires each year throughout the world. Waste tires lead to increased environmental issues and lasting resource problems. Recycling hazardous wastes to produce value-added products is becoming essential for the sustainable progress of society. A patented sulfonation process followed by pyrolysis at 1100 °C in a nitrogen atmosphere was used to produce carbon material from these tires and utilized as an anode in lithium-ion batteries. The combustion of the volatiles released in waste tire pyrolysis produces lower fossil CO 2 emissions per unit of energy (136.51 gCO 2 /kW·h) compared to other conventional fossil fuels such as coal or fuel–oil, usually used in power generation. The strategy used in this research may be applied to other rechargeable batteries, supercapacitors, catalysts, and other electrochemical devices. The Raman vibrational spectra observed on these carbons show a graphitic carbon with significant disorder structure. Further, structural studies reveal a unique disordered carbon nanostructure with a higher interlayer distance of 4.5 Å compared to 3.43 Å in the commercial graphite. The carbon material derived from tires was used as an anode in lithium-ion batteries exhibited a reversible capacity of 360 mAh/g at C/3. However, the reversible capacity increased to 432 mAh/g at C/10 when this carbon particle was coated with a thin layer of carbon. In conclusion, a novel strategy of prelithiation applied for improving the first cycle efficiency to 94% is also presented.

25 ENERGY STORAGE↗

Carbon/tin oxide composite electrodes for improved lithium-ion batteries

Tin and tin oxide-based electrodes are promising high-capacity anodes for lithium-ion batteries. However, poor capacity retention is the major issue with these materials due to the large volumetric expansion that occurs when lithium is alloyed with tin during lithiation and delithiation process. Here, a method to prepare a low-cost, scalable carbon and tin(II) oxide composite anode is reported. The composite material was prepared by ball milling of carbon recovered from used tire powders with 25 wt% tin(II) oxide to form lithium-ion battery anode. With the impact of energy from the ball milling, tin oxide powders were uniformly distributed inside the pores of waste-tire-derived carbon. During lithiation and delithiation, the carbon matrix can effectively absorb the volume expansion caused by tin, thereby minimizing pulverization and capacity fade of the electrodes. In conclusion, the as-synthesized anode yielded a capacity of 690 mAh g –1 after 300 cycles at a current density of 40 mA g –1 with a stable battery performance.

25 ENERGY STORAGE↗

Neutron vibrational spectroscopic studies of novel tire-derived carbon materials

Sulfonated tire-derived carbons have been demonstrated to be high value-added carbon products of tire recycling in several energy storage system applications including lithium, sodium, potassium ion batteries and supercapacitors. In this paper, we compared different temperature pyrolyzed sulfonated tire-derived carbons with commercial graphite and unmodified/non-functionalized tire-derived carbon by studying the surface chemistry and properties, vibrational spectroscopy of the molecular structure, chemical bonding such as C–H bonding, and intermolecular interactions of the carbon materials. The nitrogen adsorption–desorption studies revealed the tailored micro and meso pore size distribution of the carbon during the sulfonation process. XPS and neutron vibrational spectra showed that the sulfonation of the initial raw tire powders could remove the aliphatic hydrogen containing groups ([double bond splayed left]CH 2 and –CH 3 groups) and reduce the number of heteroatoms that connect to carbon. The absence of these functional groups could effectively improve the first cycle efficiency of the material in rechargeable batteries. Meanwhile, the introduced –SO 3 H functional group helped in producing terminal H at the edge of the sp 2 bonded graphite-like layers. Finally, this study reveals the influence of the sulfonation process on the recovered hard carbon from used tires and provides a pathway to develop and improve advanced energy storage materials.

36 MATERIALS SCIENCE↗

Sustainable Potassium-Ion Battery Anodes Derived from Waste-Tire Rubber

The recycling of waste-tire rubber is of critical importance since the discarded tires pose serious environmental and health hazards to our society. Here, we report a new application for hard-carbon materials derived from waste-tires as anodes in potassium-ion batteries. The sustainable tire-derived carbons show good reversible potassium insertion at relatively high rates. Long-term stability tests exhibit capacities of 155 and 141 mAh g –1 for carbon pyrolyzed at 1100°C and 1600°C, respectively, after 200 cycles at current rate of C/2. As a result, this study provides an alternative solution for inexpensive and environmental benign potassium-ion battery anode materials.

25 ENERGY STORAGE↗

Quality of Life in Long-term Survivors of Muscle-Invasive Bladder Cancer

Purpose: Health-related quality of life (QOL) has not been well-studied in survivors of muscle-invasive bladder cancer (MIBC). The present study compared long-term QOL in MIBC patients treated with radical cystectomy (RC) versus bladder-sparing trimodality therapy (TMT). Methods and Materials: This cross-sectional bi-institutional study identified 226 patients with nonmetastatic cT2-cT4 MIBC, diagnosed in 1990 to 2011, who were eligible for RC and were disease free for ≥2 years. Six validated QOL instruments were administered: EuroQOL EQ-5D, European Organisation for Research and Treatment of Cancer (EORTC) Quality of Life Core Questionnaire and EORTC MIBC module, Expanded Prostate Cancer Index Composite bowel scale, Cancer Treatment and Perception Scale, and Impact of Cancer, version 2. Multivariable analyses of the mean QOL scores were conducted using propensity score matching. Results: The response rate was 77% (n=173). The median follow-up period was 5.6 years. Of the 173 patients, 64 received TMT and 109, RC. The median interval from diagnosis to questionnaire completion was 9 years after TMT and 7 years after RC (P=.009). No significant differences were found in age, gender, comorbidities, tobacco history, performance status, or tumor stage. On multivariable analysis, patients who received TMT had better general QOL by 9.7 points of 100 compared with those who had received RC (P=.001) and higher physical, role, social, emotional, and cognitive functioning by 6.6 to 9.9 points (P≤.04). TMT was associated with better bowel function by 4.5 points (P=.02) and fewer bowel symptoms by 2.7 to 7.1 points (P≤.05). The urinary symptom scores were similar. TMT was associated with better sexual function by 8.7 to 32.1 points (P≤.02) and body image by 14.8 points (P<.001). The patients who underwent TMT reported greater informed decision-making scores by 13.6 points (P=.01) and less concern about the negative effect of cancer by 6.8 points (P=.006). The study limitations included missing baseline QOL data and different follow-up times. Conclusions: Both TMT and RC result in good long-term QOL outcomes in MIBC survivors, supporting TMT as a good alternative to RC for selected patients. Whether TMT leads to superior QOL requires prospective validation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Tire-derived carbon composite anodes for sodium-ion batteries

We report that hard-carbon materials are considered as one of the most promising anodes for the emerging sodium-ion batteries. Here, we report a low-cost, scalable waste tire-derived carbon as an anode for sodium-ion batteries (SIBs). The tire-derived carbons obtained by pyrolyzing the acid-treated tire at 1100 °C, 1400 °C and 1600 °C show capacities of 179, 185 and 203 mAh g -1 , respectively, after 100 cycles at a current density of 20 mA g -1 in sodium-ion batteries with good electrochemical stability. The portion of the low-voltage plateau region in the charge-discharge curves increases as the heat-treatment temperature increases. The low-voltage plateau is beneficial to enhance the energy density of the full cell. However, this plateau suffers rapid capacity fade at higher current densities. This study provides a new pathway for inexpensive, environmentally benign and value-added waste tire-derived products towards large-scale energy storage applications.

25 ENERGY STORAGE↗