Engineering topics

Lee, Soogab

Publications and source records attributed to Lee, Soogab.

6 records

NASA NTRS2004

Category 5: Sound Generation in Viscous Problems

Two problems are considered. Problem 1: Aeolian tones, sound generation by flow over cylinders, are relevant to airframe and power plant noise (heat exchanger, power transmission lines and chimneys). The purpose of this problem is to test the ability of a CFD/CAA code to accurately predict sound generation by viscous flows and sound propagation through interactions between acoustic wave & solid wall and between acoustic waves & shear layers. Problem 2: Sound generation by flow over a cavity.Air flows over the cavity shown below with a mean approach flow velocity of 50 m/s. The boundary layer that develops over the flat plate is turbulent with a thickness of 14 mm at the entrance to the cavity. Calculate the power spectra at the center of each cavit wall and the center of the cavity floor. Experimental data will be available for comparison.

Lee, Soogab↗

NASA NTRS1994

Reduction of blade-vortex interaction noise through porous leading edge

The effect of the porous leading edge of an airfoil on the blade-vortex interaction noise, which dominates the far-field acoustic spectrum of the helicopter, is investigated. The thin-layer Navier-Stokes equations are solved with a high-order upwind-biased scheme and a multizonal grid system. The Baldwin-Lomax turbulence model is modified for considering transpiration on the surface. The amplitudes of the propagating acoustic wave in the near field are calculated directly from the computation. The porosity effect on the surface is modeled in two ways: (1) imposition of prescribed transpiration velocity distribution and (2) calculation of transpiration velocity distribution by Darcy's law. Results show leading-edge transpiration can suppress pressure fluctuations at the leading edge during blade-vortex interaction and consequently reduce the amplitude of propagating noise by 30% at a maximum in the near field.

Lee, Soogab↗

NASA NTRS1994

Head-on parallel blade-vortex interaction

An experimental and computational study was carried out to investigate the parallel head-on blade-vortex interaction (BVI) and its noise generation mechanism. A shock tube, with an enlarged test section, was used to generate a compressible starting vortex which interacted with a target airfoil. The dual-pulsed holographic interferometry (DPHI) technique and airfoil surface pressure measurements were employed to obtain quantitative flow data during the BVI. A thin-layer Navier-Stokes code (BV12D), with a high-order upwind-biased scheme and a multizonal grid, was also used to simulate numerically the phenomena occurring in the head-on BVI. The detailed structure of a convecting vortex was studied through independent measurements of density and pressure distributions across the vortex center. Results indicate that, in a strong head-on BVI, the opposite pressure peaks are generated on both sides of the leading edge as the vortex approaches. Then, as soon as the vortex passes by the leading edge, the high-pressure peak suddenly moves toward the low-peak-reducing in magnitude as it moves--simultaneously giving rise to the initial sound wave. In both experiment and computation, it is shown that the viscous effect plays a significant role in head-on BVIs.

Lee, Soogab↗

NASA NTRS1993

Effect of leading-edge porosity on blade-vortex interaction noise

The effect of the porous leading-edge of an airfoil on the blade-vortex interaction noise, which dominates far-field acoustic spectrum of the helicopter, is investigated. The thin-layer Navier-Stokes equations are solved with a high-order upwind-biased scheme and a multizonal grid system. The Baldwin-Lomax turbulence model is modified for considering transpiration on the surface. The amplitudes of the propagating acoustic wave in the near-field are calculated directly from the computation. The porosity effect on the surface is modeled. Results show leading-edge transpiration can suppress pressure fluctuations at the leading-edge during BVI, and consequently reduce the amplitude of propagating noise by 30 percent at maximum in the near-field. The effect of porosity factor on the noise level is also investigated.

Lee, Soogab↗

NASA NTRS1993

Characteristics of deformable leading edge for high performance helicopter rotor

The deformable leading edge (DLE) concept to improve the blade capability in lift, drag and pitching moments has been investigated for the purpose of meeting new rotor maneuverability and susceptibility requirements. The advantages and disadvantages of this concept have been carefully examined with limited computational and experimental results. This work showed that this concept achieves a substantial improvement in lift capability and also reduces the drag and pitching moment at the same time. Effects of various parameters, such as Reynolds number, reduced frequency, mean angle of oscillation, and airfoil shape, on the performance of these airfoils were also investigated.

Lee, Soogab↗

NASA NTRS1991

An experimental and computational study of 2-D blade-vortex interaction

An experimental and computational study is carried out to investigate the dominant physical factors of 2D parallel blade-vortex interaction (BVI) and its noise generation. A shock tube was used to generate a starting vortex which interacted with a target airfoil. Double-exposed holographic interferometry and airfoil surface pressure measurements were employed to obtain quantitative data during the BVI. As a numerical approach, thin-layer Navier-Stokes code, with a multizonal grid, was also used to resolve the phenomena occuring in the BVI, especially in the head-on collision case.

Lee, Soogab↗