Search NASA⌕ Search

Engineering topics

Lee, Timothy J.

Publications and source records attributed to Lee, Timothy J..

126 records · Page 7

Triple and quadruple excitation contributions to the binding in Be clusters: Calibration calculations on Be3

The contribution of connected triple and quadruple excitations to the binding in Be3 is investigated by comparing various coupled-cluster (CC) and truncated configuration interaction (CI) treatments with multireference CI (MRCI) and full CI(FCI) calculations. The CC method with single and double excitations (CCSD) produces results that differ substantially from more elaborate treatments, but most extensions to CCSD that account approximately for connected triple excitations perform very well. In constrast, good agreement with FCI for Be2 can be achieved only with the highest level CC and MRCI methods.

Watts, John D.↗

Triple and quadruple excitation contributions to the binding in Be clusters - Calibration calculations on Be3

The contribution of connected triple and quadruple excitations to the binding in Be3 is investigated by comparing various coupled-cluster (CC) and truncated configuration-interaction (CI) treatments with multireference CI (MRCI) and full CI (FCI) calculations. The CC method with single and double excitations (CCSD) produces results that differ substantially from more elaborate treatments, but most extensions to CCSD that account approximately for connected triple excitations perform very well. In contrast, good agreement with CFI for Be2 can be achieved only with the highest level CC and MRCI methods.

Watts, John D.↗

Vibrations in small Mg clusters

The equilibrium geometries, binding energies, and harmonic frequencies of Mg3 and Mg4 have been determined using large atomic natural orbital basis sets in conjunction with high levels of electron correlation. The correlation treatments comprise multireference configuration interaction (MRCI), singles and doubles coupled-cluster (CCSD) theory and the CCSD(T) extension that includes a perturbational estimate of connected triple excitations. As with previous studies of small Be clusters, the CCSD(T) method is found to reproduce the MRCI results with a remarkable degree of accuracy and at a fraction of the computational cost. Using the CCSD(T) method, full quartic force fields for Mg3 and Mg4 have been determined and anharmonic analyses have been performed using second-order perturbation theory. Vibration-rotation interaction constants and centrifugal distortion constants have also been determined.

Lee, Timothy J.↗

Comparison of coupled-cluster methods which include the effects of connected triple excitations

The 'coupled cluster single, double, and triple' (CCSDT) excitation model has been used to ascertain electron correlation energies for 14 different molecules representing a variety of chemical bonds, in conjunction with several methods of this type 'CCSDT-x', which include only an approximate treatment of connected triple excitations; these methods encompass CCSDT-1a, -1b, -2, -3, and -4, as well as the novel CCSD(T). While all methods treat the effects of connected triple excitations iteratively, CCSD(T) approaches then perturbationally. For the 14 molecules considered, the CCSD(T) method's average error relative to CCSDT is substantially lower than any of the CCSDT-x methods.

Scuseria, Gustavo E.↗

The vibrational frequencies of ozone

The singles and doubles coupled-cluster (CCSD) method is used, together with the recently proposed CCSD(T) and CCSDT-1 methods, to determine the equilibrium structure and harmonic frequencies of ozone at various levels, on the basis of large one-particle basis sets. It is demonstrated that f-type functions are required in order to obtain quantitative accuracy for the equilibrium structure and harmonic frequencies. The CCSD(T) level of theory, in conjunction with a (4s 3p 2d 1f) atomic natural orbital set, yields an equilibrium geometry and harmonic frequencies that are in excellent agreement with experimental results; an effort has accordingly been made to determine the cubic and quartic force constants, and evaluate the anharmonic corrections to the fundamental vibrational frequencies.

Lee, Timothy J.↗

Vibrational frequencies for Be3 and Be4

The harmonic frequencies of Be3 and Be4, evaluated by multireference configuration-interaction (MRCI) and singles and doubles coupled-cluster (CCSD) methods, are reported, as are IR intensities evaluated by using the double harmonic approximation. A comparison of the results shows that the CCSD method augmented with a correction for connected triple excitations, CCSD(T), can be a viable alternative to MRCI for determining the ground-state properties of small Be clusters (other than the dimer). Results of normal mode analyses indicate that the anharmonic vibrational frequencies of Be3 and Be4 are reasonably consistent at the CCSD, CCSD(T), or MRCI levels of treatment.

Rendell, Alistair P.↗

Theoretical investigations of the structures and binding energies of Be(n) and Mg(n) (n = 3-5) clusters

The equilibrium geometries and binding energies of Be and Mg trimers, tetramers and pentamers have been determined using single and double excitation coupled cluster (CCSD) and complete active space self-consistent-field (CASSCF) multireference configuration interaction (MRCI) wave functions in conjunction with extended atomic basis sets. The best estimates of the cluster binding energies are 24, 83, and 110 kcal/mol for Be3, Be4, and Be5; and 9, 31, and 41 kcal/mol for Mg3, Mg4, and Mg5, respectively. A comparison of the MRCI and CCSD results shows that even the best single-reference approach (limited to single and double excitations) is not capable of quantitative accuracy in determining the binding energies of Be and Mg clusters.

Lee, Timothy J.↗

Comparison of the quadratic configuration interaction and coupled cluster approaches to electron correlation including the effect of triple excitations

The recently proposed quadratic configuration interaction (QCI) method is compared with the more rigorous coupled cluster (CC) approach for a variety of chemical systems. Some of these systems are well represented by a single-determinant reference function and others are not. The finite order singles and doubles correlation energy, the perturbational triples correlation energy, and a recently devised diagnostic for estimating the importance of multireference effects are considered. The spectroscopic constants of CuH, the equilibrium structure of cis-(NO)2 and the binding energies of Be3, Be4, Mg3, and Mg4 were calculated using both approaches. The diagnostic for estimating multireference character clearly demonstrates that the QCI method becomes less satisfactory than the CC approach as non-dynamical correlation becomes more important, in agreement with a perturbational analysis of the two methods and the numerical estimates of the triple excitation energies they yield. The results for CuH show that the differences between the two methods become more apparent as the chemical systems under investigation becomes more multireference in nature and the QCI results consequently become less reliable. Nonetheless, when the system of interest is dominated by a single reference determinant both QCI and CC give very similar results.

Taylor, Peter R.↗

The polarizabilities of neon

The static dipole polarizability, second hyperpolarizability, quadrupole polarizability and dipole-dipole-quadrupole hyperpolarizability for the Ne atom are computed, using large Gaussian basis sets and coupled cluster wavefunctions. Correlation effects are substantial, ranging from 15 percent for the dipole polarizability to 40 percent for the second hyperpolarizability. It is confirmed by explicit calculation earlier hypotheses that g-type and higher angular momentum functions and core correlation effects make almost no contribution to these properties in Ne. Triple excitations, on the other hand, are very important, accounting for as much as 25 percent of the correlation contribution to the second hyperpolarizability. The best estimate of the second hyperpolarizability is 119 + or - 4 au, in good agreement with the recent calculations of Maroulis and Thakkar (1989) and the latest experimental result of Shelton (1989).

Taylor, Peter R.↗

Ordering of the O-O stretching vibrational frequencies in ozone

The ordering of nu1 and nu3 for O3 is incorrectly predicted by most theoretical methods, including some very high level methods. The first systematic electron correlation method based on one-reference configuration to solve this problem is the coupled cluster single and double excitation method. However, a relatively large basis set, triple zeta plus double polarization is required. Comparison with other theoretical methods is made.

Scuseria, Gustavo E.↗

The effect of higher than double excitations on the F + H2 to FH + H barrier

The averaged coupled-pair functional (ACPF) method is used to calculate the barrier height and saddle-point geometry for the reaction F + H2 yields FH + H. The theoretical basis of the calculation method is outlined, and results for both 7-electron and 9-electron correlations are presented in tables and shown to be consistent with a barrier of 1.65 kcal/mol. The ACPF results are found to be in good agreement with the Davidson-corrected multireference CI computations of Bauschlicher et al. (1988) and with the results obtained by Scuseria and Schaefer (1988) using a CI method which accounts for all single, double, triple, and quadruple excitations.

Bauschlicher, Charles W., Jr.↗

Theoretical investigation of gas-surface interactions

Four reprints are presented from four projects which are to be published in a refereed journal. Two are of interest to us and are presented herein. One is a description of a very detailed theoretical study of four anionic hydrogen bonded complexes. The other is a detailed study of the first generally reliable diagnostic for determining the quality of results that may be expected from single reference based electron correlation methods.

Lee, Timothy J.↗

A high level Ab initio study of the anionic hydrogen-bonded complexes FH-CN-, FH-NC-, H2O-CN- and H2O-NC-

HF, H2O, CN- and their hydrogen-bonded complexes were studied using state-of-the-art ab initio quantum mechanical methods. A large Gaussian one particle basis set consisting of triple zeta plus double polarization plus diffuse s and p functions (TZ2P + diffuse) was used. The theoretical methods employed include self consistent field, second order Moller-Plesset perturbation theory, singles and doubles configuration interaction theory and the singles and doubles coupled cluster approach. The FH-CN- and FH-NC- and H2O-CN-, H2O-NC- pairs of complexes are found to be essentially isoenergetic. The first pair of complexes are predicted to be bound by approx. 24 kcal/mole and the latter pair bound by approximately 15 kcal/mole. The ab initio binding energies are in good agreement with the experimental values. The two being shorter than the analogous C-N hydrogen bond. The infrared (IR) spectra of the two pairs of complexes are also very similar, though a severe perturbation of the potential energy surface by proton exchange means that the accurate prediction of the band center of the most intense IR mode requires a high level of electronic structure theory as well as a complete treatment of anharmonic effects. The bonding of anionic hydrogen-bonded complexes is discussed and contrasted with that of neutral hydrogen-bonded complexes.

Lee, Timothy J.↗

A diagnostic for determining the quality of single-reference electron correlation methods

It was recently proposed that the Euclidian norm of the t sub 1 vector of the coupled cluster wave function (normalized by the number of electrons included in the correlation procedure) could be used to determine whether a single-reference-based electron correlation procedure is appropriate. This diagnostic, T sub 1, is defined for use with self consistent field molecular orbitals and is invariant to the same orbital rotations as the coupled cluster energy. T sub 1 is investigated for several different chemical systems which exhibit a range of multireference behavior, and is shown to be an excellent measure of the importance of nondynamical electron correlation and is far superior to C sub 0 from a singles and doubles configuration interaction wave function. It is further suggested that when the aim is to recover a large fraction of the dynamical electron correlation energy, a large T sub 1 (i.e., greater than 0.02) probably indicates the need for a multireference electron correlation procedure.

Lee, Timothy J.↗

A diagnostic for determining the quality of single-reference electron correlation methods

It was recently proposed that the Euclidian norm of the t(sub 1) vector of the coupled cluster wave function (normalized by the number of electrons included in the correlation procedure) could be used to determine whether a single-reference-based electron correlation procedure is appopriate. This diagnostic, T(sub 1) is defined for use with self-consistent-field molecular orbitals and is invariant to the same orbital rotations as the coupled cluster energy. T(sub 1) is investigated for several different chemical systems which exhibit a range of multireference behavior, and is shown to be an excellent measure of the importance of non-dynamical electron correlation and is far superior to C(sub 0) from a singles and doubles configuration interaction wave function. It is further suggested that when the aim is to recover a large fraction of the dynamical electron correlation energy, a large T(sub 1) (i.e., greater than 0.02) probably indicates the need for a multireference electron correlation procedure.

Lee, Timothy J.↗

Theoretical investigations of the structures and binding energies of Be(sub n) and Mg(sub n) (n = 3-5) clusters

Researchers determined the equilibrium geometries and binding energies of Be and Mg trimers, tetramers and pentamers using single and double excitation coupled cluster (CCSD) and complete active space self-consistent-field (CASSCF) multireference configuration interaction (MRCI) wave functions in conjunction with extended atomic basis sets. Best estimates of the cluster binding energies are 24, 83 and 110 kcal/mole for Be3, Be4 and Be5; and 9, 31 and 41 kcal/mole for Mg3, Mg4 and Mg5, respectively. A comparison of the MRCI and CCSD results shows that even the best single-reference approach (limited to single and double excitations) is not capable of quantitative accuracy in determining the binding energies of Be and Mg clusters.

Lee, Timothy J.↗

A high-level ab initio study of the anionic hydrogen-bonded complexes FH-CN(-), FH-NC(-), H2O-CN(-), and H2O-NC(-)

HF, H2O, CN- and their hydrogen-bonded complexes were studied using state-of-the-art ab initio quantum mechanical methods. A large Gaussian one particle basis set consisting of triple zeta plus double polarization plus diffuse s and p functions (TZ2P + diffuse) was used. The theoretical methods employed include self consistent field, second order Moller-Plesset perturbation theory, singles and doubles configuration interaction theory and the singles and doubles coupled cluster approach. The FH-CN- and FH-NC- and H2O-CN-, H2O-NC- pairs of complexes are found to be essentially isoenergetic. The first pair of complexes are predicted to be bound by approx. 24 kcal/mole and the latter pair bound by approximately 15 kcal/mole. The ab initio binding energies are in good agreement with the experimental values. The two being shorter than the analogous C-N hydrogen bond. The infrared (IR) spectra of the two pairs of complexes are also very similar, though a severe perturbation of the potential energy surface by proton exchange means that the accurate prediction of the band center of the most intense IR mode requires a high level of electronic structure theory as well as a complete treatment of anharmonic effects. The bonding of anionic hydrogen-bonded complexes is discussed and contrasted with that of neutral hydrogen-bonded complexes.

Lee, Timothy J.↗

The determination of accurate dipole polarizabilities alpha and gamma for the noble gases

The static dipole polarizabilities alpha and gamma for the noble gases helium through xenon were determined using large flexible one-particle basis sets in conjunction with high-level treatments of electron correlation. The electron correlation methods include single and double excitation coupled-cluster theory (CCSD), an extension of CCSD that includes a perturbational estimate of connected triple excitations, CCSD(T), and second order perturbation theory (MP2). The computed alpha and gamma values are estimated to be accurate to within a few percent. Agreement with experimental data for the static hyperpolarizability gamma is good for neon and xenon, but for argon and krypton the differences are larger than the combined theoretical and experimental uncertainties. Based on our calculations, we suggest that the experimental value of gamma for argon is too low; adjusting this value would bring the experimental value of gamma for krypton into better agreement with our computed result. The MP2 values for the polarizabilities of neon, argon, krypton and zenon are in reasonabe agreement with the CCSD and CCSD(T) values, suggesting that this less expensive method may be useful in studies of polarizabilities for larger systems.

Rice, Julia E.↗