Search NASA⌕ Search

Engineering topics

Lee, Yueh-Lin

Publications and source records attributed to Lee, Yueh-Lin.

At least 37 records · Page 2

Surface Energies of LaMnO 3 High-Index Surfaces Obtained from Density-Functional Theory

Here, the first six cubic LaMnO 3 high-index surfaces, (210), (211), (221), (310), (311), and (320), are examined for the first time. The unrelaxed and relaxed surface energies of the surfaces are computed as a function of surface model thickness using unrelaxed and relaxed surface models, respectively. The (210), (320), (211), and (221) surfaces are found to be more stable than the low-index (011) and (111) surfaces. Helping to explain this result, the surface terminations of the (210), (320), (211), or (221) surface are seen to exhibit a rotational relaxation of the MnO 6 or oxygen octahedra extending from the surface into the bulk. By contrast, the relaxed surface energies of the (310) and (311) surfaces are concluded to be difficult to determine due to a structural transformation or phase change in the surface models of the surfaces away from cubic LaMnO 3 . The finding of a phase change is important. It indicates that a phase change in the surface models of a surface for another material could occur if the surface is relatively open and a different phase of the material is stable at low temperature. When modeling such a surface, two steps are suggested to be taken.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Description of reaction and vibrational energetics of CO 2 –NH 3 interaction using quantum computing algorithms

CO 2 capture is critical to solving global warming. Amine-based solvents are extensively used to chemically absorb CO 2 . Thus, it is crucial to study the chemical absorption of CO 2 by amine-based solvents to better understand and optimize CO 2 capture processes. Here, we use quantum computing algorithms to quantify molecular vibrational energies and reaction pathways between CO 2 and a simplified amine-based solvent model—NH 3 . Molecular vibrational properties are important to understanding kinetics of reactions. However, the molecule size correlates with the strength of anharmonicity effect on vibrational properties, which can be challenging to address using classical computing. Quantum computing can help enhance molecular vibrational calculations by including anharmonicity. We implement a variational quantum eigensolver (VQE) algorithm in a quantum simulator to calculate ground state vibrational energies of reactants and products of the CO 2 and NH 3 reaction. The VQE calculations yield ground vibrational energies of CO 2 and NH 3 with similar accuracy to classical computing. In the presence of hardware noise, Compact Heuristic for Chemistry (CHC) ansatz with shallower circuit depth performs better than Unitary Vibrational Coupled Cluster. The “Zero Noise Extrapolation” error-mitigation approach in combination with CHC ansatz improves the vibrational calculation accuracy. Excited vibrational states are accessed with quantum equation of motion method for CO 2 and NH 3 . Using quantum Hartree–Fock (HF) embedding algorithm to calculate electronic energies, the corresponding reaction profile compares favorably with Coupled Cluster Singles and Doubles while being more accurate than HF. Our research showcases quantum computing applications in the study of CO 2 capture reactions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Deep Learning Potential For Investigation of Chemical Conversion of CO2 at Air-Reactive Deep Eutectic Solvent Interface

Capturing CO2 from air is urgent to battle against the climate change. Traditional CO2 capture by alkaline solution or aqueous amine has high regeneration cost, equipment corrosion, and amine leakage. Deep eutectic solvents (DESs) are promising alternatives with low corrosion, non-toxicity, and biodegradable nature. Functionalized DESs can capture and convert CO2 at low partial pressures. Developing reactive DESs for efficient CO2 capture needs a foundational understanding of the reaction-transport coupling of CO2 at the air-DES interface. In this study, we develop a deep learning potential (DLP) to investigate the absorption and reaction of CO2 at the air-DES interface (DES: 1-ethyl-3-methylimidazolium 2-cyanopyrrolide ([Emim][2-CNpyr]) and ethylene glycol (EG)). The DLP model allows us to simulate chemical reactions at a lower computational cost with ab initio accuracy. By analyzing reaction free energy surfaces, molecular interactions among CO2, DES components and reaction products, and transport of CO2 through the interface, we identify three main reaction pathways of CO2 at the interface: forming carboxylate with [Emim], carbamate with [2-CNpyr], and carbonate with EG. The mechanistic understanding of CO2 chemisorption at the interface will facilitate the development of novel direct air capture technology using DESs.

Nguyen, Manh Tien↗

Defect Thermodynamics and Transport Properties of Proton Conducting Oxide BaZr 1–x Y x O 3–δ (x ≤ 0.1) Guided by Density Functional Theory Modeling

Density functional theory-based thermodynamic modeling was performed to determine the effect of humidity and H 2 /O 2 gas pressure on the defect chemistry and transport properties of proton conducting oxide BaZr 1-x Y x O 3-δ (x ≤ 0.1) in the temperature range of 800–1200K, relevant for solid oxide fuel/electrolysis cell applications. The first-principles charge defect analysis was carried out to obtain the defect energetic ensembles as a function of Fermi level as well as the dependence of the hydration and oxidation reaction energies on complex defect-dopant configurations. It is shown that oxygen vacancies introduced to compensate for the extra Ba vacancies may cause a slight increase in the concentration of hydroxyl and proton species upon hydration of Ba deficient BaZr 1-x Y x O 3-δ , while the overall proton diffusivity is predicted to decrease with increased proton hopping barriers upon trapping near the Ba vacancies. The developed defect model is further demonstrated to be able to describe the bulk defect chemistry and transport properties of BaZr 0.9 Y 0.1 O 3-δ under the solid oxide cell operating conditions. Finally, the theoretical framework developed in this work further allows the inclusion of configurational, energetic and electronic characteristics of the defects that can be used as a complementary tool to experimental measurements for testing various mechanistic pathways or to provide essential mechanistic data.

36 MATERIALS SCIENCE↗

Modeling Ni redistribution in the hydrogen electrode of solid oxide cells through Ni(OH) 2 diffusion and Ni-YSZ wettability change

Ni redistribution in the hydrogen electrodes of solid oxide cells is an important degradation mechanism. Its driving force is still under debate. This work focuses on the interplay between Ni(OH) 2 diffusion and Ni-YSZ wettability change. With a Ni(OH) 2 diffusion model developed in our previous work, we further employ three models for the Ni-YSZ contact angle to quantify the Ni-YSZ wettability change. The microstructure evolutions in a reconstructed Ni-YSZ electrode are simulated under selected experimental operating conditions. It is shown that the phenomenological model can capture the driving force of Ni spreading/detachment on YSZ surface and the Ni migration reported in experiments can be qualitatively reproduced through the competition between Ni(OH) 2 diffusion and Ni-YSZ wettability change. It is also found that the initial microstructure of the active layer and the microstructure characteristics in the support layer can strongly affect the distribution of steam partial pressure and overpotential, hence the Ni redistribution, in the active layer, which may explain the inconsistencies in experiments. Further, our results show that there are two missing pieces in current theory of Ni redistribution: a mechanism of fast Ni diffusion under humid atmosphere and the physical reason behind the Ni spreading/detachment.

25 ENERGY STORAGE↗