Search NASA⌕ Search

Engineering topics

Lees, Eric W.

Publications and source records attributed to Lees, Eric W..

Local ionic transport enables selective PGM-free bipolar membrane electrode assembly

Bipolar membranes in electrochemical CO 2 conversion cells enable different reaction environments in the CO 2 -reduction and O 2 -evolution compartments. Under ideal conditions, water-splitting in the bipolar membrane allows for platinum-group-metal-free anode materials and high CO 2 utilizations. In practice, however, even minor unwanted ion crossover limits stability to short time periods. Here we report the vital role of managing ionic species to improve CO 2 conversion efficiency while preventing acidification of the anodic compartment. Through transport modelling, we identify that an anion-exchange ionomer in the catalyst layer improves local bicarbonate availability and increasing the proton transference number in the bipolar membranes increases CO 2 regeneration and limits K + concentration in the cathode region. Through experiments, we show that a uniform local distribution of bicarbonate ions increases the accessibility of reverted CO 2 to the catalyst surface, improving Faradaic efficiency and limiting current densities by twofold. Using these insights, we demonstrate a fully platinum-group-metal-free bipolar membrane electrode assembly CO 2 conversion system exhibiting <1% CO 2 /cation crossover rates and 80-90% CO 2 -to-CO utilization efficiency over 150 h operation at 100 mA cm -2 without anolyte replenishment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploring CO 2 reduction and crossover in membrane electrode assemblies

Electrochemical CO 2 reduction (CO 2 R) using renewable electricity is a key pathway toward synthesizing fuels and chemicals. In this study, multi-physics modeling is used to interpret experimental data obtained for CO 2 R to CO using Ag catalysts in a membrane electrode assembly. The one-dimensional model is validated using measured CO 2 crossover and product formation rates. The kinetics of CO formation are described by Marcus–Hush–Chidsey kinetics, which enables accurate prediction of the experimental data by accounting for the reorganization of the solvent during CO 2 R. Further, the results show how the performance is dictated by competing phenomena including ion formation and transport, CO 2 solubility, and water management. The model shows that increasing the ion-exchange capacity of the membrane and surface area of the catalyst increases CO formation rates by >100 mA cm –2 without negatively impacting CO 2 utilization. Here we provide insights into how to manage the trade-off between productivity and CO 2 utilization in CO 2 electrolyzers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multi-scale physics of bipolar membranes in electrochemical processes

Bipolar membranes (BPMs) enable control of ion concentrations and fluxes in electrochemical cells suitable for a wide range of applications. Here, in this work, we present the multi-scale physics of BPMs in an electrochemical engineering context and articulate design principles to drive the development of advanced BPMs. The chemistry, structure, and physics of BPMs are illustrated and related to the thermodynamics, transport phenomena, and chemical kinetics that dictate ion and species fluxes and selectivity. These interactions give rise to emergent structure–property–performance relationships that yield design criteria for BPMs that achieve high permselectivity, durability, and voltaic efficiency. The resulting performance trade-offs for BPMs are presented in the context of emerging applications in energy conversion or storage, and environmental remediation. By connecting the fundamental physical phenomena in BPMs to device-level performance and engineering, we aim to facilitate the development of next-generation BPMs for sustainable electrochemical processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analysis of bipolar membranes for electrochemical CO 2 capture from air and oceanwater

Carbon dioxide (CO 2 ) must be removed from the atmosphere to mitigate the negative effects of climate change. However, the most scalable methods for removing CO 2 from the air require heat from fossil-fuel combustion to produce pure CO 2 and continuously regenerate the sorbent. Bipolar-membrane electrodialysis (BPM-ED) is a promising technology that uses renewable electricity to dissociate water into acid and base to regenerate bicarbonate-based CO 2 capture solutions, such as those used in chemical loops of direct-air-capture (DAC) processes, and in direct-ocean capture (DOC) to promote atmospheric CO 2 drawdown via decarbonization of the shallow ocean. In this study, we develop an experimentally validated 1D model for the electrochemical regeneration of CO 2 from bicarbonate-based carbon capture solutions and seawater using BPM-ED. For DAC, our experimental and computational results demonstrate that pH swings induced by BPM water dissociation drive the formation of CO 2 at the cation-exchange layer|catholyte interface with energy-intensities of less than 150 kJ mol -1 . However, high rates of bubble formation increase energy intensity at current densities >100 mA cm -2 . Correspondingly, accelerating water dissociation catalysis and enacting bubble removal could enable CO 2 recovery at energy intensities <100 kJ mol -1 and current densities >100 mA cm -2 . For DOC, mass transport limitations associated with low carbon concentrations in oceanwater suggest that DOC is best suited for clean production of acid and base usable in downstream processes. Further, these results provide design principles for industrial-scale CO 2 recovery using BPM-ED.

54 ENVIRONMENTAL SCIENCES↗

Continuum Modeling of Porous Electrodes for Electrochemical Synthesis

Electrochemical synthesis possesses substantial promise to utilize renewable energy sources to power the conversion of abundant feedstocks to value-added commodity chemicals and fuels. Of the potential system architectures for these processes, only systems employing 3-D structured porous electrodes have the capacity to achieve the high rates of conversion necessary for industrial scale. However, the phenomena and environments in these systems are not well understood and are challenging to probe experimentally. Fortunately, continuum modeling is well-suited to rationalize the observed behavior in electrochemical synthesis, as well as to ultimately provide recommendations for guiding the design of next-generation devices and components. In this review, we begin by presenting an historical review of modeling of porous electrode systems, with the aim of showing how past knowledge of macroscale modeling can contribute to the rising challenge of electrochemical synthesis. We then present a detailed overview of the governing physics and assumptions required to simulate porous electrode systems for electrochemical synthesis. Here, leveraging the developed understanding of porous-electrode theory, we survey and discuss the present literature reports on simulating multiscale phenomena in porous electrodes in order to demonstrate their relevance to understanding and improving the performance of devices for electrochemical synthesis. Lastly, we provide our perspectives regarding future directions in the development of models that can most accurately describe and predict the performance of such devices and discuss the best potential applications of future models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrolytic Methane Production from Reactive Carbon Solutions

Here, we report an electrochemical reactor that converts 3.0 M KHCO 3 into methane at the cathode, and oxidizes water at the anode. The molar ratio of methane product to unreacted CO 2 gas (defined herein as "methane yield") was measured to be 34% at a partial current density of 120 mA cm -2 . The highest previously reported CO 2 -to-methane yield is 3%. Our reactor achieved this improvement in methane yield because it is fed with 3.0 M KHCO 3 , a type of reactive carbon solution, rather than gaseous CO 2 . The reactor uses H + delivered by a bipolar membrane to form CO 2 at the cathode. This CO 2 is subsequently reduced into methane. A cationic surfactant added to the catholyte suppressed hydrogen evolution and increased methane formation. A 1D continuum model confirmed that H + from the membrane promotes the formation of methane over multicarbon products at the cathode. These findings present design principles for electrochemical methane synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Continuum Model to Define the Chemistry and Mass Transfer in a Bicarbonate Electrolyzer

Bicarbonate electrolyzers are devices designed to convert CO 2 captured from point sources or the atmosphere into chemicals and fuels without needing to first isolate pure CO 2 gas. In this work, we report here an experimentally validated model that quantifies the reaction chemistry and mass transfer processes within the catalyst layer and cation exchange membrane layer of a bicarbonate electrolyzer. Our results demonstrate that two distinct chemical microenvironments are key to forming CO at high rates: an acidic membrane layer that promotes in situ CO 2 formation and a basic catalyst layer that suppresses the hydrogen evolution reaction. We show that the rate of CO product formation can be increased by modulating the catalyst and membrane layer properties to increase the rate of in situ CO 2 generation and transport to the cathode. These insights serve to inform the design of bicarbonate and BPM-based CO 2 electrolyzers while demonstrating the value of modeling for resolving rate-determining processes in electrochemical systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chapter 10: Electrochemical Reactors

An electrolyzer capable of converting CO2 into carbon-based fuels and chemicals will need to operate at current densities in excess of 200 mA cm-2 for industrial applications. This chapter provides a comprehensive review of design considerations for electrolytic flow cell reactors capable of operation at these high current densities. We highlight how the dynamic chemical environment at these conditions is differentiated from experimental conditions more common to academic investigations, and provide a survey of reactor architectures that are being investigated for mediating the CO2 reduction reaction.

carbon-based fuels↗