Engineering topics

Lehmusto, Juho

Publications and source records attributed to Lehmusto, Juho.

5 records

DOE OSTI2024

High-Temperature Oxidation Study in a Multi-Oxidant Environment Using 18 O Tracer

The goal of this study was to use 18 O-enriched water to better understand the role of H 2 O in high-temperature oxidation. Seven model and three commercial M-Cr and M-Cr-Al alloys were studied in air with 10% of H 2 O at 800 °C for 5 h. Oxygen from water vapor was more reactive than oxygen from the air and 18 O enriched at the outermost layers of the formed Cr- and Al-rich oxides. Alloys with Al and/or Ti additions showed signs of internal oxidation but 18 O was not enriched inside the alloy in locations with internal oxidation. In conclusion, depending on the alloy Al content, the oxide went from Al oxidation beneath a chromia scale to external alumina scale formation.

18O-enriched water↗

DOE OSTI2023

Rapid Quenching of Molten Salts as an Approach for the Coordination Characterization of Corrosion Products

A new apparatus was built to rapidly cool molten salts in liquid argon to prevent contamination during quenching and enable new insight into the structure in the liquid state. To test the applicability of the apparatus, several industrially relevant chloride salt compositions were first melted, rapidly solidified, and then characterized. The design proved applicable for the rapid quenching of molten salt. Furthermore, the structure of the apparatus prevented exposure of the rapidly quenched salt to impurities (humidity, oxygen, etc.). X-ray diffraction of salt specimens cooled with and without liquid argon showed differences including a structure further from the expected stoichiometric equilibrium with rapid cooling. Of particular interest is the chemical state of metallic impurities, and this may be probed using electron paramagnetic resonance.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Comprehensive insights into competitive oxidation/sulfidation reactions on binary ferritic alloys at high temperatures

Interpreting high-temperature corrosion induced by mixed-gas atmospheres is challenging due to the different contributions of oxidizing gases. In this work, a comprehensive study on the combined oxidation/sulfidation using label molecules is presented. Fe-Cr model alloys with 2 wt% and 9 wt% Cr were isothermally exposed using a volumetric mixture of 0.5%S 16 O 2 /27%H 2 18 O and 0.5%S 16 O 2 /7%H 2 18 O at 650 °C for 5 h and then characterized by secondary ion mass spectroscopy (SIMS). Additionally, the reactions were followed in-situ utilizing energy dispersive X-ray diffraction. The study showed that both S 16 O 2 and H 2 18 O contribute to the oxidation of the alloys but to different extents depending on the Cr-content.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Effect of annealing and supercritical CO 2 exposure at 750°C on the tensile properties of stainless steel and Ni-based structural alloys

Subsize dogbone tensile specimens of alloys 304H, 310HCbN, and 740H were exposed to 30 MPa supercritical CO 2 (sCO 2 ) for up to 4000 h at 750°C. Similar exposures in laboratory air were used to assess the specific role of sCO 2 exposure on the alloy tensile properties. Type 304H specimens were only embrittled by exposure in sCO 2 due to the formation of a thick Fe-rich oxide and C ingress in the bulk of the alloy. For 310HCbN and 740H, no effect of the sCO 2 environment was observed and a decrease of the alloy's ductility was associated with previously observed microstructure evolutions, for example, grain boundary carbide formation. The 740H was tested in the solution annealed condition and self-aging took place during 750°C exposures in sCO 2 and air with the formation of fine gamma prime precipitates leading to significant tensile strength increase. It was found that both 740H and 310HCbN have adequate sCO 2 compatibility for high-temperature commercial applications.

36 MATERIALS SCIENCE↗

DOE OSTI2020

The Impact of Impurities on Alloy Behavior in Supercritical CO 2 at 700 °C

As part of round robin testing, specimens of commercial alloys 316, 120, 625, and 740 were exposed to 20 MPa research grade CO 2 at 700 °C for up to 1500 h. The first set of specimens had higher mass gain likely due to impurities not flushed from the autoclave at startup. After this issue was corrected, an identical set of specimens exhibited lower mass gains for both the Fe- and Ni-based alloys. The differences in reaction products were characterized to understand the effect of impurities under these conditions. As suggested by the mass change, thicker oxides were formed in each case, primarily for the Fe-based alloys. Furthermore, for the Ni-based alloys, the difference was primarily in the transient stage of oxidation with no change in rate constant. Alloy 120 exhibited increased internal attack, and differences in the scale phases formed were characterized to better understand the effect of impurities. Alloy 740 primarily exhibited a greater depth of internal attack in the first run.

36 MATERIALS SCIENCE↗