Search NASA⌕ Search

Engineering topics

Leitao, C. D.

Publications and source records attributed to Leitao, C. D..

16 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

A study of the variability of ocean currents in the northwestern Atlantic using satellite altimetry

Altimeter data obtained from GEOS-3 during the three year period 1975-78 for a region of the western North Atlantic which includes a portion of the Gulf Stream system and part of the open ocean area of the subtropical gyre are analyzed by a new technique which utilizes all the points along the satellite tracks. The physical phenomenon studied are the time-variable but almost geostrophic currents, or mesoscale eddies, so that geoid errors contaminate the scientific signal minimally and the dynamical interpretation is direct. Results presented include the spatial distribution of geostrophic eddy kinetic energy and examples of a synoptic map of the eddy field (April 1977) and of a time series at a point. These results are compared to and synthesized with a diverse and select set of existing measurements and observations obtained in situ by a variety of instrumental techniques. The agreement is generally good, and the altimeter data analyzed provides new information on features in the map of mean eddy kinetic energy. The implications are that satellite altimetry will serve as a powerful quantitative tool in eddy current research and that even presently archived data contains further useful scientific information.

Robinson, A. R.↗
NASA NTRS1980

GEOS-3 radar altimeter study for the South Atlantic Bight

Three years of radar altimeter data from GEOS-3 for the South Atlantic Bight were processed. Mean monthly topographic maps were produced which estimate geostrophic flow in the region. Statistical distribution of the surface wind speed and significant wave height as a function of both space and time are presented.

Leitao, C. D.↗
NASA NTRS1978

GEOS-3 ocean current investigation using radar altimeter profiling

Both quasi-stationary and dynamic departures from the marine geoid were successfully detected using altitude measurements from the GEOS-3 radar altimeter. The quasi-stationary departures are observed either as elevation changes in single pass profiles across the Gulf Stream or at the crowding of contour lines at the western and northern areas of topographic maps generated using altimeter data spanning one month or longer. Dynamic features such as current meandering and spawned eddies can be monitored by comparing monthly mean maps. Comparison of altimeter inferred eddies with IR detected thermal rings indicates agreement of the two techniques. Estimates of current velocity are made using derived slope estimates in conjunction with the geostrophic equation.

Leitao, C. D.↗
NASA NTRS1978

Large-scale Gulf Stream frontal study using GEOS 3 radar altimeter data

From data obtained by the GEOS 3 radar altimeter, sea surface heights are found by both editing and filtering the raw sea surface height measurements and then referencing these processed data to a 5 foot by 5 foot geoid. Any trend between the processed data and the geoid is removed by subtracting out a linear fit to the residuals in the open ocean. Data from individual passes are further processed by applying a minimum variance technique at the subsatellite crossing points to produce surface topography maps for the 6 months and an overall mean map which reveal important details about the Gulf Stream system. The differences between the monthly mean and the overall mean are calculated for each of the 6 months to show the temporal and spatial changes of the Gulf Stream front and spawned eddies. The standard deviation map is even more informative and shows preferred locations of Gulf Stream meanders.

Huang, N. E.↗
NASA NTRS1978

Remote sensing of Gulf Stream using GEOS-3 radar altimeter

Radar altimeter measurements from the GEOS-3 satellite to the ocean surface indicated the presence of expected geostrophic height differences across the the Gulf Stream. Dynamic sea surface heights were found by both editing and filtering the raw sea surface heights and then referencing these processed data to a 5 minute x 5 minute geoid. Any trend between the processed data and the geoid was removed by subtracting out a linear fit to the residuals in the open ocean. The mean current velocity of 107 + or - 29 cm/sec calculated from the dynamic heights for all orbits corresponded with velocities obtained from hydrographic methods. Also, dynamic topographic maps were produced for August, September, and October 1975. Results pointed out limitations in the accuracy of the geoid, height anomaly deteriorations due to filtering, and lack of dense time and space distribution of measurements.

Leitao, C. D.↗
NASA NTRS1977

National geodetic satellite program, part 1

The major accomplishments of the GEOS-B, C-band systems project is assessed. The project objectives are given, namely: (1) primary objectives that must be met for project success; (2) secondary objectives that were sufficiently important to warrant serious consideration; and (3) other objectives that were important to the project and for which additional effort would be desirable. The primary objectives are presented and discussed in detail.

Belgin, J.↗
NASA NTRS1977

Ocean current surface measurement using dynamic elevations obtained by the GEOS-3 radar altimeter

Remote Sensing of the ocean surface from the GEOS-3 satellite using radar altimeter data has confirmed that the altimeter can detect the dynamic ocean topographic elevations relative to an equipotential surface, thus resulting in a reliable direct measurement of the ocean surface. Maps of the ocean dynamic topography calculated over a one month period and with 20 cm contour interval are prepared for the last half of 1975. The Gulf Stream is observed by the rapid slope change shown by the crowding of contours. Cold eddies associated with the current are seen as roughly circular depressions.

Leitao, C. D.↗
NASA NTRS1976

Skylab earth resources experiment package /EREP/ - Sea surface topography experiment

The S-193 Skylab radar altimeter was operated in a round-the-world pass on Jan. 31, 1974. The main purpose of this experiment was to test and 'measure' the variation of the sea surface topography using the Goddard Space Flight Center (GSFC) geoid model as a reference. This model is based upon 430,000 satellite and 25,000 ground gravity observations. Variations of the sea surface on the order of -40 to +60 m were observed along this pass. The 'computed' and 'measured' sea surfaces have an rms agreement on the order of 7 m. This is quite satisfactory, considering that this was the first time the sea surface has been observed directly over a distance of nearly 35,000 km and compared to a computed model. The Skylab orbit for this global pass was computed using the Goddard Earth Model (GEM 6) and S-band radar tracking data, resulting in an orbital height uncertainty of better than 5 m over one orbital period.

Vonbun, F. O.↗
NASA NTRS1976

Generation of an ocean geoid map using satellite altimeter data

A discussion of the techniques and accuracies associated with creating a geoid from satellite altimeter data is given. A sample set of Skylab S-193 altimeter data is utilized to demonstrate the generation of a local ocean geoid contour map in the Atlantic and Caribbean ocean area. The altimeter geoid compares well with existing geoids; possible sources of errors are identified. In addition, the application of a long arc (global type) pass of Skylab data for providing a common reference system and validating localized geoids is illustrated.

Wells, W. T.↗
NASA NTRS1975

Satellite altimetry applied to marine geoid determination

The pioneering satellite radar altimeter aboard Skylab has provided a wealth of information about ocean surface topography for both the oceanographic and geodetic communities. This report describes typical satellite altimetry concepts and discusses the parameters measured, geometry utilized, and techniques employed to generate ocean geoid estimates. The standard deviation of the noise on the altitude measurements is shown to range from one to three meters when the altimeter antenna is nadir aligned. The altimeter is shown to sense short wavelength ocean surface features which are not included in present conventional global geoids. An estimate of a local geoid in the Atlantic, using only altimeter data, is presented. Finally, results demonstrate that the Skylab radar altimeter system capability is less than 10 meters RMS.

Leitao, C. D.↗
NASA NTRS1975

Summary of Skylab S-193 altimeter altitude results

The SKYLAB S-193 altimeter altitude results are presented in a concise format for further use and analysis by the scientific community. The altimeter mission and instrumentation is described along with the altimeter processing techniques and values of parameters used for processing. The determination of reference orbits is discussed, and the tracking systems utilized are tabulated. Techniques for determining satellite pointing are presented and a tabulation of pointing for each data mission included. The geographical location, the ocean bottom topography, the altimeter-determined ocean surface topography, and the altimeter automatic gain control history is presented. Some typical applications of this data are suggested.

Mcgoogan, J. T.↗
NASA NTRS1974

Skylab radar altimeter - Short-wavelength perturbations detected in ocean surface profiles

Short-wavelength anomalies in sea surface topography, caused by the gravitational effects of major ocean bottom topographic features, have been detected by the radar altimeter aboard Skylab. Some features, such as deep ocean trenches, seamounts, and escarpments, displace the ocean surface by as much as 15 meters over 100-kilometer wavelengths. This experiment demonstrates the potential of satellite altimetry for determining the ocean geoid and for mapping major features of the ocean bottom.

Leitao, C. D.↗
NASA NTRS1974

Skylab altimeter applications and scientific results

Analysis of the Skylab S-193 Altimeter Experiment data has produced many significant results. The purpose of this paper is to present some of these results which illustrate the programmatic altimeter technology gained and show the scientific potential of altimetry for various applications, including correlation with existing topographic features, geoids and physical models. It will be shown that there exists a very strong correlation between subsurface topography in the broad ocean area and the shape of the ocean surface as determined from the altimeter. Modeled scattering waveforms will be correlated with Skylab Altimeter waveforms. The agreement of a variety of existing geoid models with the altimeter data will be shown. In addition the calibration, accuracy and stability of the S-193 altimeter instrumentation will be discussed.

Mcgoogan, J. T.↗
NASA NTRS1974

Skylab S-193 altimeter experiment performance, results and applications

A description of the Skylab altimeter instrument system along with the appropriate system error model is presented. The data processing flow, orbit computation, and topographic recovery techniques are discussed. Some data analysis results are presented which indicate excellent correlation with underwater topographic features. In addition, results are shown which indicate that the instrument performance was as expected.

Mcgoogan, J. T.↗