Engineering topics

Lentz, Eric J.

Publications and source records attributed to Lentz, Eric J..

4 records

DOE OSTI2023

Core collapse supernova gravitational wave emission for progenitors of 9.6, 15, and 25 M ⊙

Here, we present gravitational wave emission predictions based on three core collapse supernova simulations corresponding to three different progenitor masses. The masses span a large range, between 9.6 and 25M ⊙ , are all initially nonrotating, and are of two metallicities: zero and solar. We compute both the temporal evolution of the gravitational wave strains for both the plus and the cross polarizations, as well as their spectral decomposition and characteristic strains. The temporal evolution of our zero metallicity 9.6M ⊙ progenitor model is distinct from the temporal evolution of our solar metallicity 15M ⊙ progenitor model and our zero metallicity 25M ⊙ progenitor model. In the former case, the high-frequency gravitational wave emission is largely confined to a brief time period ~75 ms after bounce, whereas in the latter two cases high-frequency emission does not commence until ~125 ms after bounce or later. The excitation mechanisms of the high-frequency emission in all three cases correspond to proto-neutron star convection and accretion onto the proto-neutron star from the convective gain layer above it, with the former playing the dominant role for most of the evolution. The low-frequency emission in all three models exhibits very similar behavior. At frequencies below ~250 Hz, gravitational waves are emitted by neutrino-driven convection and the standing accretion shock instability (SASI). This emission extends throughout the simulations when a gain region is present. In all three models, explosion is observed at ~125, ~500, and ~250 ms after bounce in the 9.6, 15, and 25M ⊙ progenitor models, respectively. At these times, the low-frequency gravitational wave emission is joined by very low-frequency emission, below ~10 Hz. These very low-frequency episodes are the result of explosion and begin at the above designated explosion times in each of our models. Our characteristic strains tell us that, in principle, all three gravitational wave signals would be detectable by current-generation detectors for a supernova at a distance of 10 kpc. However, our 9.6M ⊙ progenitor model is a significantly weaker source of gravitational waves, with strain amplitudes approximately 5–10 times less than in our other two models. The characteristic strain for this model tells us that such a supernova would be detectable only within a much more narrow frequency range around the maximum sensitivity of today’s detectors. Finally, in our 9.6M ⊙ progenitor model, we see very high-frequency gravitational radiation, extending up to ~2000 Hz. This feature results from the interaction of shock- and deleptonization-induced convection with perturbations introduced in the progenitor by nuclear burning during core collapse. While unique to the 9.6M ⊙ progenitor model analyzed here, this very high-frequency emission may, in fact, be a generic feature of the predictions for the gravitational wave emission from all core collapse supernova models when simulations are performed with three-dimensional progenitors.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2021

Three-dimensional Core-collapse Supernova Simulations with 160 Isotopic Species Evolved to Shock Breakout

We present three-dimensional simulations of core-collapse supernovae using the FLASH code that follow the progression of the explosion to the stellar surface, starting from neutrino radiation hydrodynamic simulations of the neutrino-driven phase performed with the Chimera code. We consider a 9.6 M ⊙ zero-metallicity progenitor starting from both 2D and 3D Chimera models and a 10 M ⊙ solar-metallicity progenitor starting from a 2D Chimera model, all simulated until shock breakout in 3D while tracking 160 nuclear species. The relative velocity difference between the supernova shock and the metal-rich Rayleigh–Taylor (R-T) "bullets" determines how the metal-rich ejecta evolves as it propagates through the density profile of the progenitor and dictates the final morphology of the explosion. We find maximum 56 Ni velocities of ~1950 and ~1750 km s -1 at shock breakout from 2D and 3D 9.6 M ⊙ Chimera models, respectively, due to the bullets' ability to penetrate the He/H shell. When mapping from 2D, we find that the development of higher-velocity structures is suppressed when the 2D Chimera model and 3D FLASH model meshes are aligned. The development of faster-growing spherical-bubble structures, as opposed to the slower-growing toroidal structure imposed by axisymmetry, allows for interaction of the bullets with the shock and seeds further R-T instabilities at the He/H interface. We see similar effects in the 10 M ⊙ model, which achieves maximum 56 Ni velocities of ~2500 km s -1 at shock breakout.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2020

Gravitational-wave signal of a core-collapse supernova explosion of a 15M ⊙ star

In this paper we report on the gravitational-wave signal computed in the context of a three-dimensional simulation of a core-collapse supernova explosion of a 15 M ⊙ star. The simulation was performed with our neutrino hydrodynamics code chimera . We detail the gravitational wave strains as a function of time, for both polarizations, and discuss their physical origins. We also present the corresponding spectral signatures. Gravitational wave emission in our model has two key features: low-frequency emission (less than 200 Hz) emanates from the gain layer as a result of neutrino-driven convection and the standing accretion shock instability (SASI), and high-frequency emission (greater than 600 Hz) emanates from the proto–neutron star due to Ledoux convection within it. The high-frequency emission dominates the gravitational wave emission in our model and emanates largely from the convective layer itself, not from the convectively stable layer above it, due to convective overshoot. Moreover, the low-frequency emission emanates from the gain layer itself, not from the proto–neutron star, due to accretion onto it. We provide evidence of the SASI in our model and demonstrate that the peak of our low-frequency gravitational wave emission spectrum corresponds to it. Given its origin in the gain layer, we classify the SASI emission in our model as p-mode emission and assign a purely acoustic origin, not a vortical–acoustic origin, to it. We compare the results of our three-dimensional model analysis with those obtained from the model’s two-dimensional counterpart and find a significant reduction in the strain amplitudes in the former case, as well as significant reductions in all related quantities. Our dominant proto–neutron star gravitational wave emission is not well characterized by emission from surface g modes, complicating the relationship between peak frequencies observed and the mass and radius of the proto–neutron star expressed by analytic estimates under the assumption of surface g-mode emission. We present our frequency normalized characteristic strain along with the sensitivity curves of current- and next-generation gravitational wave detectors. This simple analysis indicates that the spectrum of gravitational wave emission between approximately 20 Hz and approximately 1 kHz, stemming from neutrino-driven convection, the SASI, accretion onto the proto–neutron star, and proto–neutron star convection, will be accessible for a Galactic event.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2020

C HIMERA : A Massively Parallel Code for Core-collapse Supernova Simulations

Herein we provide a detailed description of the C HIMERA code, a code developed to model core collapse supernovae (CCSNe) in multiple spatial dimensions. The CCSN explosion mechanism remains the subject of intense research. Progress to date demonstrates that it involves a complex interplay of neutrino production, transport, and interaction in the stellar core, three-dimensional stellar core fluid dynamics and its associated instabilities, nuclear burning, and the fundamental physics of the neutrino–stellar core weak interactions and the equations of state of all stellar core constituents—particularly, the nuclear equation of state associated with core nucleons, both free and bound in nuclei. C HIMERA , by incorporating detailed neutrino transport, realistic neutrino–matter interactions, three-dimensional hydrodynamics, realistic nuclear, leptonic, and photonic equations of state, and a nuclear reaction network, along with other refinements, can be used to study the role of neutrino radiation, hydrodynamic instabilities, and a variety of input physics in the explosion mechanism itself. It can also be used to compute observables such as neutrino signatures, gravitational radiation, and the products of nucleosynthesis associated with CCSNe. The code contains modules for neutrino transport, multidimensional compressible hydrodynamics, nuclear reactions, a variety of neutrino interactions, equations of state, and modules to provide data for post-processing observables such as the products of nucleosynthesis, and gravitational radiation. C HIMERA is an evolving code, being updated periodically with improved input physics and numerical refinements. We detail here the current version of the code, from which future improvements will stem, which can in turn be described as needed in future publications.

79 ASTRONOMY AND ASTROPHYSICS↗