Search NASA⌕ Search

Engineering topics

Levin, Igor

Publications and source records attributed to Levin, Igor.

9 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Integrating crystallographic and computational approaches to carbon-capture materials for the mitigation of climate change

Here, this article presents an overview of the current state of the art in the structure determination of microporous carbon-capture materials, as discussed at the recent NIST workshop “Integrating Crystallographic and Computational Approaches to Carbon-Capture Materials for the Mitigation of Climate Change”. The continual rise in anthropogenic CO 2 concentration and its effect on climate change call for the implementation of carbon capture technologies to reduce the CO 2 concentration in the atmosphere. Porous solids, including metal–organic frameworks (MOFs), are feasible candidates for gas capture and storage applications. However, determining the structure of these materials represents a significant obstacle in their development into advanced sorbents. The existing difficulties can be overcome by integrating crystallographic methods and theoretical modeling. The workshop gathered experimentalists and theorists from academia, government, and industry to review this field and identify approaches, including collaborative opportunities, required to develop tools for rapid determination of the structures of porous solid sorbents and the effect of structure on the carbon capture performance. We highlight the findings of that workshop, especially in the need for reference materials, standardized procedures and reporting of sorbent activation and adsorption measurements, standardized reporting of theoretical calculations, and round-robin structure determination.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Lattice vibrations and energy landscape of the isoelectronic semiconductor series CuBr, ZnSe, GaAs, and Ge: The special case of CuBr and its $\mathcal{d}$-level chemistry

Here we have examined the lattice vibrations and the energy landscape of the isoelectronic diamond and zincblende semiconductor series CuBr, ZnSe, GaAs, and Ge. Vibrations are found to be an increasing function of ionicity, with the cation sublattice always vibrating more strongly than the anion sublattice. These findings are consistent with density functional theory (DFT) calculations of the energy landscape and temperature-dependent molecular dynamics simulations of the atomic-position fluctuations. For CuBr, inclusion of the Cu 3d Hubbard U term is found necessary to stabilize the zincblende structure and to bring its vibrational amplitudes into agreement with experiment. In addition, vibrations are found to strongly affect the CuBr near-edge x-ray absorption fine structure that we have successfully modeled by including displacements in our theoretical Bethe-Salpeter equation calculations. Reverse Monte Carlo structural refinements using large atomic configurations to simultaneously fit x-ray absorption and x-ray total-scattering data support these conclusions, and they reveal strong Cu-Br first-neighbor correlations and asymmetric distributions of interatomic distances in the temperature ranges of both negative and positive thermal expansion. Delineation of the CuBr valence band photoelectron spectrum into its Cu 3d and Br 4p states uniquely reveals their covalent mixing and further supports the DFT results.

36 MATERIALS SCIENCE↗
DOE OSTI2023

In situ probing of interfacial roughness and transient phases during ceramic cold sintering process

The ceramic cold sintering process (CSP) offers an eco-friendly approach to producing fully dense ceramics at low temperatures. However, an incomplete mechanistic understanding hinders its optimization and widespread adoption. In this study, we analyze the microstructural and structural changes in ZnO, a model CSP system, using in situ synchrotron-based high-energy small-angle X-ray scattering and X-ray diffraction techniques. Our results reveal the time evolution of ZnO particles' surface area and roughness, reflecting the dissolution and re precipitation processes that enable densification. The in situ measurements supply valuable kinetic data for these stages of CSP. Alongside microstructural changes and densification, we observed the evolution of secondary phases representing reaction products between ZnO and acetic acid, the solvent used. The initial ZnO/solvent mixture's dominant secondary phase is attributed to zinc acetate, which is gradually replaced by a zinc soap-type structure during CSP. This structure has a large (≈ 21 Å) lattice parameter and is assumed to have a layered nature. The formation of this soap phase, which is retained in the sintered product as an intergranular component, appears to be a signature of successful cold sintering as it facilitates mass transport, leading to densification. Here, our study underscores the potential of in situ synchrotron characterization for revealing microstructural and phase-evolution details during CSP. These findings, which would be challenging to obtain through ex situ measurements, provide crucial data to guide and validate theoretical models, ultimately enhancing CSP's effectiveness and adoption.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Extended q -Range X-Ray Scattering Reveals High-Resolution Structural Details of Biomacromolecules in Aqueous Solutions

Here, we communicate a feasibility study for high-resolution structural characterization of biomacromolecules in aqueous solution from X-ray scattering experiments measured over a range of scattering vectors (q) that is approximately two orders of magnitude wider than used previously for such systems. Scattering data with such an extended q-range enables the recovery of the underlying real-space atomic pair distribution function, which facilitates structure determination. We demonstrate the potential of this method for biomacromolecules using several types of cyclodextrins (CD) as model systems. We successfully identified deviations of the tilting angles for the glycosidic units in CDs in aqueous solutions relative to their values in the crystalline forms of these molecules. Such level of structural detail is inaccessible from standard small angle scattering measurements. Our results call for further exploration of ultra-wide-angle X-ray scattering measurements for biomacromolecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Nanoscale-correlated octahedral rotations in BaZrO 3

BaZrO 3 is reportedly one of few perovskites that retains an ideal cubic structure down to zero Kelvin even though its ground state as predicted by first-principles calculations has remained contentious. Here, we combine electron diffraction with total neutron scattering measured on ceramic samples at cryogenic temperatures to demonstrate that below 80 K, this compound undergoes a structural change associated with the onset of correlated out-of-phase rotations of [ZrO 6 ] octahedra. Here, the change is manifested in the appearance of weak but relatively sharp superlattice reflections at ½hkl (h, k, l = odd), which are readily detectable by electron diffraction. Atomistic structural refinements from the total neutron scattering data confirmed that these reflections are associated with octahedral tilting. The observed rotations are consistent with the a 0 a 0 c - type and feature a coherence length of about 3 nm. The average structure of BaZrO 3 , as seen by Bragg diffraction, remains cubic. According to the electron diffraction data, Nb-doped BaZrO 3 undergoes a similar structural transition but in this case, the tilting couldn't be recovered from the neutron scattering, suggesting that the distortions are smaller compared to those in the pure compound.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

In situ characterization of ceramic cold sintering by small-angle scattering

The first in situ characterization of the pore morphology evolution during the cold sintering process (CSP) is presented using small-angle X-ray scattering methods. For practical reasons, measurements have been made on a model system, KH 2 PO 4 (KDP). The scattering signal revealed a striking behavior that could be modeled with nanoscale structural features associated with the dissolution and reprecipitation of KDP close to the grain/pore interface during CSP. The prospects for future more quantitative experiments under a range of temperature and pressure conditions, as well as for studies of more technologically important materials such as ZnO are considered.

36 MATERIALS SCIENCE↗