Engineering topics
Li, Bo
Publications and source records attributed to Li, Bo.
Mechanical Characterization of Stacked Single-Crystal of Polyethylene and Monolayer MoSe 2
Polymer single crystal (SC) is a key building block of semicrystalline polymers. However, direct experimental measurement of freestanding mono-lamella polymer SC has not been demonstrated. This is, in large part, due to the difficulties associated with manipulating freestanding individual mono-lamella SC because of its extremely low rigidity and low robustness. Here, we demonstrate a new strategy to successfully suspend and test a polymer SC by using a 2D material as backing. In particular, mono-lamella polyethylene (PE) SC is stacked on monolayer MoSe 2 , and the hybrid stacks can be suspended over microholes. Nanoindentation is used to probe the suspended PE-SC/MoSe2 stacks and MoSe 2 monolayers. The results suggest the first experimentally-measured in-plane moduli of PE-SC and 2D MoSe 2 as 32 ± 3 and 237 ± 15 GPa, respectively. Such a stacked unit represents an ultrathin structure of polymer-ceramic laminate and the idea can be applied to other laminated composite systems. Therefore, this research will pave the way to accurately measure the mechanical properties of polymer SCs and their composites, as well as provide a key insight on designing composite structures.
Simulation study of particle transport by weakly coherent mode in the Alcator C-Mod tokamak
A simulation study has been conducted of the physical mechanisms behind the weakly coherent mode (WCM) and its produced particle transport in the I-mode edge plasmas by using the BOUT++ code. The WCM is identified in our simulations by its poloidal and radial distributions as well as its frequency and wavenumber spectra. Its produced radial particle flux is calculated and compared with the experimental value. The good agreement indicates that the WCM is an important particle transport channel in the I-mode pedestal. It is found that the WCM can transport particles across the strong outer shear layer of the Er well established in the formation of I-mode, based on which a possible explanation is provided why I-mode does not feature a density pedestal. The key point lies in the change of the cross-phase between the electric potential and density fluctuations induced by the E × B Doppler shift. In the strong shear layer, although the electric potential fluctuation is significantly suppressed, the cross-phase is close to π/2, resulting in a strong drive of the density fluctuation and particle transport. To identify the physical nature of the WCM, a linear dispersion relation for drift Alfvén modes is derived in the slab geometry. A drift Alfvén wave instability is found to have similar dependence to the simulated linear instability behind the WCM on the resistivity and the parallel electron pressure gradient and thermal force terms in the parallel Ohm's law.
Relaxor ferroelectric polymer exhibits ultrahigh electromechanical coupling at low electric field
Electromechanical (EM) coupling—the conversion of energy between electric and mechanical forms—in ferroelectrics has been used for a broad range of applications. Ferroelectric polymers have weak EM coupling that severely limits their usefulness for applications. Here, we introduced a small amount of fluorinated alkyne (FA) monomers (<2 mol %) in relaxor ferroelectric poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) (PVDF-TrFE-CFE) terpolymer that markedly enhances the polarization change with strong EM coupling while suppressing other polarization changes that do not contribute to it. Under a low–dc bias field of 40 megavolts per meter, the relaxor tetrapolymer has an EM coupling factor (k 33 ) of 88% and a piezoelectric coefficient (d 33 ) >1000 picometers per volt. These values make this solution-processed polymer competitive with ceramic oxide piezoelectrics, with the potential for use in distinct applications.
Interfacial Effects on the Dielectric Properties of Elastomer Composites and Nanocomposites
Elastomer-based composites and nanocomposites are discussed, with the emphasis on the filler and interfacial effects on their dynamics, and the resulting manifestation in their macroscopic dielectric or mechanical response. Specifically, selected polydimethylsiloxane (PDMS)/barium-titanate and styrene-butadiene rubber (SBR)/graphene oxide nanocomposites are discussed, as examples where controlled spatial distribution of filler (structured composites) gives rise to significantly different dielectric and thermomechanical behaviors. Also, ethylene–propylene–diene (EPDM)/carbon black (CB) composites are presented, as examples of systems that exhibit an abnormal temperature dependence of dielectric relaxation; and this response is discussed in the context of CB cluster polarization and quantified through a simple scaling model of the same. Finally, multi-filler EPDM/CB/ceramic elastomer nanocomposites are discussed, as examples of systems with antagonistic interfacial effects between conductive and dielectric fillers, as well as with strong interphase responses that can overwhelm the dielectric contributions from the fillers; in these systems, interphasial responses result in counter-intuitive dielectric behaviors and in strong deviations from standard design principles typically employed in the design of dielectric composite systems.
Atomic Edge-Guided Polyethylene Crystallization on Monolayer Two-Dimensional Materials
In this report we combine an advanced synthesis of two-dimensional (2D) materials (MoSe 2 ) having well-defined atomic edge configurations with ab initio and atomistic molecular dynamics (MD) simulations to study how atomic edges interact with polyethylene (HDPE) chains in a dilute solution assembly process. Our results reveal that Mo-terminated zigzag (Mo-ZZ) edges act as preferred nucleation sites and strongly interact with HDPE chains. The HDPE chains align in parallel with the Mo-ZZ edges and form arrays of lamellae that are perpendicular to the edges. Interestingly, atomic edge configurations are observed to dramatically change such interactions. The crystallization discrepancy at different edges was demonstrated on the same piece of MoSe 2 with different types of edges. The ab initio and MD simulations between n-alkane (n = 5 and 25), a segment of HDPE, and MoSe 2 suggest that the atomic structures of MoSe 2 can affect their interactions with n-alkane chains. Following the Mo-ZZ edge preferred nucleation principle, controlled long-range alignment of HDPE lamellae can be realized by creating multilayer MoSe 2 with parallel atomic steps. This research opens a pathway toward an atomic level understanding of polymer–2D nanomaterial interactions. It also bridges the gap between atomic-level and long-range mesoscopic structures and introduces a novel strategy for long-range structural control.
Thermal equation of state of Cr-pyrope: implications for entrapment pressure of Cr-pyrope inclusion
Explore the source record for details and available documents.
Effect of Thermoelastic Properties of the Pyrope-Almandine Solid Solutions on the Entrapment Pressur
Explore the source record for details and available documents.
Thermal equation of state of the main minerals of eclogite: Constraining the density evolution of ec
Explore the source record for details and available documents.
Scalable multiple changepoint detection for functional data sequences
Explore the source record for details and available documents.
Transition between Nonresonant and Resonant Charge Transport in Molecular Junctions
Explore the source record for details and available documents.
Self-organized confinement in whole-device modeling of laboratory magnetospheres
Turbulent self-organization driven by global ideal interchange modes in a dipole-confined plasma is explored with self-consistent, whole-plasma simulations using a flux-tube averaged magnetohydrodynamic model in dipole magnetic geometry. We show the existence of robust particle pinch driven by ideal interchange-mode fluctuations, in which the particles are transported up the density gradient. It is found that the plasma profiles in a dipole field spontaneously relax to a marginally stable state as centrally peaked pressure and density are created by global interchange-mode transport.
Novel theranostic agent for PET imaging and targeted radiopharmaceutical therapy of tumour-infiltrating immune cells in glioma
Background: Malignant gliomas are deadly tumours with few therapeutic options. Although immunotherapy may be a promising therapeutic strategy for treating gliomas, a significant barrier is the CD11b + tumour-associated myeloid cells (TAMCs), a heterogeneous glioma infiltrate comprising up to 40% of a glioma's cellular mass that inhibits anti-tumour T-cell function and promotes tumour progression. A theranostic approach uses a single molecule for targeted radiopharmaceutical therapy (TRT) and diagnostic imaging; however, there are few reports of theranostics targeting the tumour microenvironment. Methods: Utilizing a newly developed bifunctional chelator, Lumi804, an anti-CD11b antibody (αCD11b) was readily labelled with either Zr-89 or Lu-177, yielding functional radiolabelled conjugates for PET, SPECT, and TRT. Findings: 89 Zr/ 177 Lu-labeled Lumi804-αCD11b enabled non-invasive imaging of TAMCs in murine gliomas. Additionally, 177 Lu-Lumi804-αCD11b treatment reduced TAMC populations in the spleen and tumour and improved the efficacy of checkpoint immunotherapy. Interpretation: 89 Zr- and 177 Lu-labeled Lumi804-αCD11b may be a promising theranostic pair for monitoring and reducing TAMCs in gliomas to improve immunotherapy responses.
Design of ultrahigh-affinity and dual-specificity peptide antagonists of MDM2 and MDMX for P53 activation and tumor suppression
Not Available
Spatial zonation of a hydrotalcite-like phase in the inner product of slag: New insights into the hydration mechanism
The nano-structural evolution of the inner product of ground granulated blast furnace slag in blended cement at 7, 14, 28 56 and 180d was revealed. Three distinct layered inner hydration product region were observed because of the spatial zonation of hydrotalcite-like phase, C-A-S-H gel and Ca-Al LDH phase. The zonation of inner hydration product explains the presence of the multi-rims features of the slag grains with a relatively high reaction degree at very late ages. Diffusion of dissolved ion from slag grains and the effect of pore space on the reorganization of hydration products play a key role in forming the spatial zonation of inner hydration product. The findings of the zonation of inner region argue that the lack of pore space in the inner region makes the continued dissolution of slag hard to complete.
Electronic Structure of Superoxidized Radical Cationic Dodecaborate-Based Clusters
Not provided.
A high-efficiency self-healing cementitious material based on supramolecular hydrogels impregnated with phosphate and ammonium
High-efficiency self-healing cementitious materials using hydroxyapatites as healing product were described. Supramolecular hydrogels impregnated with phosphate and ammonium ions were designed. Morphology of the supramolecular hydrogel and its capability to release phosphate in solution, the structure of healing products and the self-healing efficiency were characterized with a range of analytical techniques. Cracks in the cementitious materials with width up to 1 mm are closed and completely healed. The healing product in the cracks without ammonium ions was brushite with a sponge-like morphology. Released ammonium ions reacted with calcium hydroxide in the cement matrix, increasing the concentration of soluble calcium ions up to 300 times that in reference pore solution. Ammonium ions facilitated the formation and aggregation of healing products which were converted into hydroxyapatites, improving the maximum healable crack width.
Electrocatalytic synthesis of heterocycles from biomass-derived furfuryl alcohols
It is very attractive yet underexplored to synthesize heterocyclic moieties pertaining to biologically active molecules from biomass-based starting compounds. Herein, we report an electrocatalytic Achmatowicz reaction for the synthesis of hydropyranones from furfuryl alcohols, which can be readily produced from biomass-derived and industrially available furfural. Taking advantage of photo-induced polymerization of a bipyridyl ligand, we demonstrate the facile preparation of a heterogenized nickel electrocatalyst, which effectively drives the Achmatowicz reaction electrochemically. A suite of characterization techniques and density functional theory computations were performed to aid the understanding of the reaction mechanism. It is rationalized that the unsaturated coordination sphere of nickel sites in our electrocatalyst plays an important role at low applied potential, not only allowing the intimate interaction between the nickel center and furfuryl alcohol but also enabling the transfer of hydroxide from nickel to the bound furfuryl alcohol.