Search NASA⌕ Search

Engineering topics

Li, Bo

Publications and source records attributed to Li, Bo.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Final Technical Report for the SciDAC Center for the Study of Plasma Microturbulence

This final technical report for the SciDAC Center for the Study of Plasma Microturbulence documents contributions from MIT to the project over the period of the award (February 15, 2011 to February 14, 2020). This project focused on the development of neoclassical and gyrokinetic simulation capabilities relevant for the description of particle, momentum and energy transport in tokamak fusion plasmas. Extensive validation against experimental results from Alcator C-Mod and DIII-D experiments was performed. Overall areas of emphasis included gyrokinetic simulations, experiments, and observation of density gradient driven Trapped Electron Mode (TEM) turbulence relevant to burning plasmas; theory and gyrokinetic simulations of the parametric variation of the nonlinear upshift of the TEM critical density gradient; identification of a new mechanism for the isotope effect due to density gradient driven TEM turbulence; new synthetic diagnostics based on full-wave simulations which enabled unprecedented agreement between gyrokinetic simulations and measured fluctuation spectra with and without strong electron heating; development of new continuum pedestal neoclassical and turbulence codes; formulation and implementation of the first gyrokinetic exact Fokker-Planck collision operator in gyrokinetic turbulence simulations; development of new spectral approaches in velocity space for highly efficient treatments of collisions; new model collision operators implemented in the discontinuous Galerkin gyrokinetic edge turbulence code GKEYLL; and a new model and spectral code to study the interaction of ion- and electron-scale turbulence, which will serve as an efficient test-bed for multi-rate and multi-scale methods. These fundamental advances contribute to the development of a validated, predictive capability for turbulent and collisional particle, momentum and energy transport in both the core and edge of magnetically confined fusion plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Novel structured Sm 0.5 Sr 0.5 CoO 3-δ cathode for intermediate and low temperature solid oxide fuel cells

The performance of solid oxide fuel cell (SOFC) can be significantly enhanced using nanostructured cathode obtained by infiltration/impregnation method. However, this method has been limited due to multi-step preparation process and instability of the obtained nanoscale catalyst under long-term operation. We report here a simple, cost-effective and reproducible approach to fabricate nanostructured Sm 0.5 Sr 0.5 CoO 3-δ (SSC) cathode with enhanced performance and stability. The SSC powders were prepared by a freeze-drying method through a combustion route using Pluronic F-127 as the template. The SSC freeze-drying powders have unique morphology and a significant phase change at 750 °C. The oxygen non-stoichiometry (δ) of the SSC powders is 0.18 at room temperature, while the δ values are 0.66, 0.75 and 0.90 at 600 °C, 700 °C and 800 °C, respectively. The novel structured SSC cathode was prepared by screen-printing and one-step sintering process using the freeze-drying SSC powders. Maximum cell power densities of 0.83 and 1.13 W cm -2 are achieved at 550 °C and 600 °C, respectively for single cells with the novel structured SSC cathode. Moreover, single cells show excellent stability at 600 °C under a current density of 600 mA cm -2 over 250 h. This work expands opportunities to exploit nanotechnology in a wide range of intermediate and low temperature energy conversion devices.

25 ENERGY STORAGE↗
DOE OSTI2020

Mechanochemical synthesis of pillar[5]quinone derived multi-microporous organic polymers for radioactive organic iodide capture and storage

The incorporation of supramolecular macrocycles into porous organic polymers may endow the material with enhanced uptake of specific guests through host–guest interactions. Here we report a solvent and catalyst-free mechanochemical synthesis of pillar[5]quinone (P5Q) derived multi-microporous organic polymers with hydrophenazine linkages (MHP-P5Q), which show a unique 3-step N 2 adsorption isotherm. In comparison with analogous microporous hydrophenazine-linked organic polymers (MHPs) obtained using simple twofold benzoquinones, MHP-P5Q is demonstrated to have a superior performance in radioactive iodomethane (CH 3 I) capture and storage. Mechanistic studies show that the rigid pillar[5]arene cavity has additional binding sites though host–guest interactions as well as the halogen bond (-I···N = C-) and chemical adsorption in the multi-microporous MHP-P5Q mainly account for the rapid and high-capacity adsorption and long-term storage of CH 3 I.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Magnonic analog of the Edelstein effect in antiferromagnetic insulators

Here we investigate the nonequilibrium spin polarization due to a temperature gradient in antiferromagnetic insulators, which is the magnonic analog of the inverse spin-galvanic effect of electrons. We derive a linear-response theory of a temperature-gradient-induced spin polarization for collinear and noncollinear antiferromagnets, which comprises both extrinsic and intrinsic contributions. We apply our theory to several noncentrosymmetric antiferromagnetic insulators, i.e., to a one-dimensional antiferromagnetic spin chain, a single layer of kagome noncollinear antiferromagnet, e.g., KFe 3 ( OH ) 6 ( SO 4 ) 2 , and a noncollinear breathing pyrochlore antiferromagnet, e.g., LiGaCr 4 O 8 . The shapes of our numerically evaluated response tensors agree with those implied by the magnetic symmetry. Furthermore, assuming a realistic temperature gradient of 10 K/mm , we find two-dimensional spin densities of up to ~ 10 6 ℏ / cm 2 and three-dimensional bulk spin densities of up to ~ 10 14 ℏ / cm 3 , encouraging an experimental detection

36 MATERIALS SCIENCE↗
DOE OSTI2019

Effect of Electropulsing on Surface Mechanical Behavior and Microstructural Evolution of Inconel 718 during Ultrasonic Surface Rolling Process

In the current study, the surface mechanical behavior and microstructural evolution of Inconel 718 superalloy processed by the ultrasonic surface rolling process (USRP) and electropulsing-assisted ultrasonic surface rolling process (EP-USRP) were carefully analyzed. The experimental results suggested that after EP-USRP with a frequency of 400 Hz, significant enhancements in Vickers microhardness and nanoindentation hardness were achieved compared to those of USRP specimens, with increases of 13.6 and 9.9%, respectively. Moreover, the machined surface quality, wear resistance, and thermal stability were also improved after EP-USRP (400 Hz). These enhancements in mechanical behavior are closely related to the microstructural evolution induced by electropulsing. Under the coupling of thermal and athermal effects of high-energy electropulsing, the deformation limit of USRP is surpassed and a new balance is achieved between the electropulsing softening effect and the ultrasonic rolling hardening effect. Therefore, further grain refinement, improved plastic deformation ability in the strengthened layer, and the interaction effect between nano-sized precipitates and grain boundaries are probably the main reasons for these results.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Laparoscopic Isolated Total Caudate Lobectomy for Hepatocellular Carcinoma Located in the Paracaval Portion of the Cirrhotic Liver

Background: Despite the widespread use of laparoscopic hepatectomies in past decades, laparoscopic isolated total caudate lobectomy for hepatocellular carcinoma (HCC) remains challenging,{sup 1,2} especially for patients with cirrhosis. Moreover, a laparoscopic isolated total caudate lobectomy for HCC originating in the paracaval portion of the caudate lobe is very rare. We herein present a video showing laparoscopic total caudate lobectomy for a cirrhotic patient with HCC located in the paracaval portion of the caudate lobe. Methods: A 58-year-old woman who suffered from hepatitis C virus-related cirrhosis was admitted to our institution. The preoperative computed tomography showed a 2.5 × 2.0 cm liver mass located in segment I that was very close to the right hepatic pedicle. Although her liver function was Child–Pugh A, the indocyanine green (ICG)-15 test was high at 10.9%. Right hepatectomy plus caudate lobectomy was not adopted because of the severe cirrhosis and the elevated ICG-15. Thus, laparoscopic isolated total caudate lobectomy was contemplated. Results: The patient was placed in the supine position. After full mobilization, the caudate lobe was exposed. The third porta of the liver was then dissected and the short hepatic veins were controlled with clips and LigaSure. The dissection was finished when the whole third porta of the liver was freed. Subsequently, the portal branches to the caudate lobe were ligated and cut. The combination between the left- and right-sided laparoscopic approaches was used to transect liver parenchyma. The superficial parenchyma was divided using an harmonic scalpel, while the deeper tissue was divided using a Cavitron ultrasonic aspirator (CUSA). The Pringle maneuver was used intermittently during the parenchymal transection as necessary. In the left-sided approach, the caudate lobe was resected along the left and middle hepatic vein toward the right side, to expose the dorsal semicircle of the right hepatic vein. In the right-sided approach, the resection started from the right border of the process portion to the root of the right hepatic vein in the cranial direction. Finally, the whole caudate lobe was resected and the three main hepatic veins were exposed on the cutting plane. The specimen was removed from suprapubic incision. The operative time was 300 min and the total Pringle time was 50 min. The postoperative course was uneventful. Conclusions: A laparoscopic isolated total caudate lobectomy for HCC located in the paracaval portion of the cirrhotic liver seems to be feasible and safe in selected patients.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2019

Sono-Assisted Surface Energy Driven Assembly of 2D Materials on Flexible Polymer Substrates: A Green Assembly Method Using Water

The challenges in achieving a green and scalable integration of two-dimensional (2D) materials with flexible polymer substrates present a major barrier for the application of 2D materials, such as graphene, MoS2, and h-BN for flexible devices. Here, we create a sono-assisted surface energy driven assembly (SASEDA) method that can achieve foot-scale to micrometer-scale assembly of 2D materials, form a conductive network in as short as 10 s, and build hierarchical and hybrid flexible devices such as sensors, resistors, and capacitors by using water as the dispersion solvent. SASEDA highlights two counterintuitive innovations. First, we use an 'unfavorable' solvent (i.e., water) for both 2D materials (e.g., graphene, MoS2, and h-BN) and polymer substrates (e.g., polydimethylsiloxane) to drive the assembly process. Second, we use a weak sono-field (0.3 W/cm2) generated by a regular sonication bath cleaner to enhance the assembly efficiency and reorganize and unify the assembly network. This method and its principle pave the way toward affordable large-scale 2D material-based flexible devices.

2D material↗
DOE OSTI2019

Topotactic Synthesis of Phosphabenzene-Functionalized Porous Organic Polymers: Efficient Ligands in CO 2 Conversion

Progress toward the preparation of porous organic polymers (POPs) with task-specific functionalities has been exceedingly slow—especially where polymers containing low-oxidation phosphorus in the structure are concerned. In this work, a two-step topotactic pathway for the preparation of phosphabenzene-based POPs (Phos-POPs) under metal-free conditions is reported, without the use of unstable phosphorus-based monomers. The synthetic route allows additional functionalities to be introduced into the porous polymer framework with ease. As an example, partially fluorinated Phos-POPs (F-Phos-POPs) were obtained with a surface area of up to 591 m 2 g –1 . After coordination with Ru species, a Ru/F-Phos-POPs catalyst exhibited high catalytic efficiency in the formylation of amines (turnover frequency up to 204 h –1 ) using a CO 2 /H 2 mixture, in comparison with the non-fluorinated analogue (43 h –1 ) and a Au/TiO 2 heterogeneous catalysts reported previously (<44 h –1 ). This work describes a practical method for synthesis of porous organic phosphorus-based polymers with applications in transition-metal-based heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Effect of the doping of PC61BM electron transport layer with carbon nanodots on the performance of inverted planar MAPbI3 perovskite solar cells

The doping effect of carbon nanodots (CNDs) in the PC61BM electron-transport layer on the performance of inverted planar MAPbI3 perovskite solar cells (PSCs) having two different kinds of the hole-transport layer, namely organic PEDOT:PSS and inorganic NiOx, was investigated. The CH3NH3PbI3 perovskite layer was deposited in air at 35% humidity. An average 11% and 12% enhancement of the power conversion efficiency (PCE) was achieved for 1 wt% CNDs doping in the PSCs with PEDOT:PSS and NiOx, respectively. This improvement is attributed to high electron density of CNDs resulting in a triple increase of the electrical conductivity of the PC61BM layer and passivation of the perovskite/PC61BM interface that is reflected by an increase of the open-circuit voltage. In line with this, parallel resistance and fill factor of the PSCs are also improved. Moreover, the energy-resolved electrochemical impedance spectroscopy revealed additional free-charge carriers in the PC61BM layer generated under illumination that were detected via the polaron states formation in the band gap with positive effect on the short-circuit current. All these factors contribute to the PCE improvement. Stability tests of the PSC with PEDOT:PSS under a continuous 24 hour 1.5 AM illumination showed a five times smaller final PCE decrease for the 1 wt% CNDs doping of the PC61BM layer comparing to the undoped counterpart. The passivation effect of CNDs, namely electron filling the traps formed by the photo-dimerization and photo-oxidation of PC61BM molecules, is responsible for this remarkable improvement of the short-term stability. © 2019 International Solar Energy Society.

60 APPLIED LIFE SCIENCES↗